+421 950 333 113info@handymade.storeHandymade Days: −10 % on all ready-made productsShop now

GLASS BOTTLES 15 ml

Blue Glass Bottle, White Oral Spray, 15 ml

Pack size10 ml15 ml30 ml50 ml100 ml

Blue glass medicine bottle, oral sprayer, 15 ml A set consisting of a small glass bottle and an oral sprayer for precise dispensing of liquid preparations. full description

AvailabilityIn stock · 156 pcs
Product codeO18SM015-OVV18PBORAL
€1.48incl. VAT

Lowest price in the last 30 days: €1.48

Volume pricing
1–199 pcs€1.48Your price
200–999 pcs€1.36−8 %
1000–4999 pcs€1.28−13 %
from 5000 pcs€1.15−23 %

Total for 1 pcs: €1.48

Quantities add up across all combinations of this bottle.

Product description

Blue glass medicine bottle, oral sprayer, 15 ml

A set consisting of a small glass bottle and an oral sprayer for precise dispensing of liquid preparations. Blue glass reduces light transmission, so it suits hydrosol sprays, toners, aromatic sprays with essential oils or alcohol-based preparations that should be protected from light. The 15 ml capacity suits samples, test batches and travel sizes, where a larger bottle would sit open unnecessarily.

The bottle has a medicine bottle shape with an 18/410 neck finish. A sprayer with the same thread is included in the set, so you do not need to look for the closure separately. The sprayer is made of white PP plastic and has a dip tube reaching into the bottle.


Suitable uses

  • Aromatic sprays – blends of essential oils in alcohol or in water with a solubiliser, where a small dose matters.
  • Hydrosols and toners – water-based preparations for targeted refreshment in a size that fits in a bag.
  • Samples and test batches – when developing a formulation, it is enough to fill a few millilitres and observe how the preparation behaves in real packaging.
  • Alcohol-based tinctures and extracts for cosmetic use – glass resists alcohol and the pump works without difficulty with thin solutions.

Dispensing and filling

One press releases approximately 0.1 ml. Such a dose suits small areas and preparations that are applied sparingly and repeatedly. The pump system is designed for thin liquids. Thick oils or preparations with a thickener pass through it with difficulty or not at all. With liquid vegetable oils, test how the sprayer behaves before you fill an entire batch.

The dip tube of the sprayer is longer than the height of this bottle requires. Before first use, shorten it with a straight cut so that it ends just above the bottom. The sprayer will then use up the contents right to the end.

Nominal volume is the amount the packaging is intended for under normal filling. Total volume to the brim, stated in the parameters, is the physical volume of the bottle up to the neck. The difference forms a reserve for the dip tube and the body of the sprayer and for the expansion of the contents when the temperature changes. Fill up to the nominal volume. If you fill to the brim, part of the contents will overflow as soon as you screw on the sprayer.


Good to know

Before first filling, wash the bottle, disinfect it with isopropyl alcohol or ethanol and let it dry completely. Rinse the sprayer with clean water, or with ethanol, and let it dry as well. Residual moisture in the tube can spoil a water-based preparation before you use it up. Repeat the procedure each time you reuse the set. The set withstands several cycles as long as the pump dispenses evenly.

Glass resists alcohol and essential oils. The plastic parts of the sprayer come into contact with the contents through the tube and the valve. With a higher concentration of essential oils or solvents, therefore, check whether the material softens over time and whether the seal holds. Let hot contents cool before filling, as glass does not tolerate sudden temperature changes.

The sprayer has a declaration of suitability for contact with cosmetic products. The bottle does not have such a declaration on its own, so the set as a whole is not declared as suitable for contact with cosmetics and is not approved for contact with food.

Closures with an 18/410 neck finish and ready-made bottle and closure combinations can be found in the Handymade range. If you make your own combination, check the tightness, the dispensing and the behaviour of the packaging with your specific formulation. Glass belongs in glass recycling, the PP sprayer in plastics recycling.


Frequently asked questions

How much liquid fits into a 15 ml glass bottle with an oral sprayer?
Under normal filling, the bottle is filled up to the nominal volume of 15 ml. The total volume to the brim is higher and you can find its value in the product parameters. The difference serves as a reserve for the dip tube and the valve of the sprayer and for the expansion of the contents when the temperature changes. Filling to the brim causes overflow as soon as you screw on the sprayer.
Can the oral sprayer be used for oil?
Only for liquid, thin oils, and even with those we recommend a test before filling an entire batch. The pump mechanism is designed for water-based and alcohol-based preparations. Thick oils, macerated oils with a waxy portion or emulsions pass through it with difficulty. The dose is then irregular or the valve becomes blocked.
How do I prepare the blue glass bottle and the sprayer before first filling?
Wash the bottle, disinfect it with isopropyl alcohol or ethanol and let it dry completely. Rinse the sprayer with clean water and let it dry as well. Shorten the dip tube according to the height of the bottle so that it ends just above the bottom. With water-based preparations, a dry interior is key, as residual water dilutes the preservative and shortens the usable life of the contents.
Is the set of a blue bottle with an oral sprayer suitable for alcohol-based preparations?
Yes, glass resists alcohol and the sprayer works with alcohol solutions without problems. With a higher concentration of essential oils in alcohol, watch the plastic parts of the sprayer, especially the dip tube and the valve, for any change in shape or tightness after longer contact. Treat the first filling as a test with your specific formulation.
Does the 18/410 oral sprayer also fit other bottles?
Yes, the sprayer has an 18/410 thread and fits any bottle with the same neck. The dip tube is longer so that it can be shortened according to the height of the specific bottle. With another bottle, check that it seals tightly once screwed on and that the dose is even. You can find more bottles with an 18/410 neck in the Handymade range.

Parameters

Glass bottle, vial, blue, 18 mm, 15 ml

Product colour
Blue
Country of origin
China
Nominal capacity
15
Brimful capacity
18 ml
Diameter
28,5 mm
Thread type
18/410
Height
63,8 mm
Product material
Glass

Throat spray pump, white, 18/410

Country of origin
China
Diameter
33,1 mm
Thread type
18/410
Height
42,8 mm
Product material
PPPlastic
Tube length
115 mm
Dose
0,1 ml

Product documentation

PPWRPackaging Declaration (PPWR)
Glass bottle, vial, blue, 18 mm, 15 ml · O18SM015PDF ↓
Throat spray pump, white, 18/410 · OVV18PBORALPDF ↓
PDSProduct Data Sheet
Glass bottle, vial, blue, 18 mm, 15 ml · O18SM015PDF ↓
Throat spray pump, white, 18/410 · OVV18PBORALPDF ↓
DrawingTechnical drawing
Glass bottle, vial, blue, 18 mm, 15 ml · O18SM015PDF ↓
Download all (ZIP)

5 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.