Clear Frosted Glass Bottle, Glossy Gold Black Pump With Clear Overcap, 15 ml

The frosted glass bottle with a 15 ml volume and a plastic pump in a black and gold glossy finish is used to package small volumes of cosmetics that you want to dispense precisely and without your fingers touching the contents. It is suited above all to facial serums, eye serums, facial oils and light emulsions, where small doses are used. Matte glass lets the contents show through slightly, so you can see how much product is left in the bottle. The set is supplied with a pump and a clear overcap, which protects the pump head from dirt and accidental pressing.

What the set is suitable for

• Serums and concentrates – the 15 ml volume matches a standard pack of facial or eye serum, where only a few doses are used per application.
• Facial oils and oil serums – the pump dispenses oil without dripping down the walls of the bottle.
• Light emulsions and fluids – liquid to medium-thick textures pass through the pump smoothly.
• Samples and travel packs – the small volume and closable top suit samples for customers or a smaller amount decanted from a larger pack.

How the set works

The bottle has a neck with an 18 mm thread, onto which the pump is screwed. The pump dispenses approximately 0.3 ml per press, which is an appropriate amount for a facial serum or oil. The dip tube reaches the bottom of the bottle and draws up the contents even at a lower level. The clear overcap fits over the pump head and prevents the contents from being pushed out accidentally during transport or storage.

When using the bottle for the first time, prime the pump by pressing it several times until the dip tube fills and the dose starts to come out evenly. If the dip tube extends beyond the bottom of the bottle, shorten it with a diagonal cut so that it touches the bottom and draws up the last remnants of the contents.

Nominal and total volume

The nominal volume of 15 ml is the volume the bottle is designed to hold when filled normally. The total brimful capacity given in the parameters is the physical volume up to the neck. The difference between them is a reserve for the dip tube and the body of the pump, which take up part of the space once screwed on, and for the expansion of the contents with temperature changes. The bottle should therefore be filled to the nominal volume, not to the brim. If it is overfilled, the contents overflow through the neck when the pump is screwed on.

Good to know

The set is declared suitable for contact with cosmetic products, and the declaration of conformity is available with the product. It is not approved for contact with food, so it is not suitable for homemade oils, syrups or herbal infusions.

Before the first filling, wash and disinfect the bottle and the pump and let them dry completely. You will find the procedure in the questions below.

Glass does not tolerate sudden temperature changes, so do not pour a hot emulsion into the bottle straight after emulsifying, but let it cool first. For contents with a high proportion of essential oils or solvents, we recommend checking in advance how the plastic parts of the pump behave. Glass is resistant to them, but plastic may not be.

The glass bottle belongs in glass recycling. The pump contains plastic and aluminium parts, so unscrew it from the bottle before recycling and hand it in for collection according to the instructions in your region.

Frequently asked questions