PLASTIC BOTTLES
Amber Plastic Bottle, Glossy Gold Black Pump With Clear Overcap, 115 ml
Pack size10 ml30 ml50 ml100 ml115 ml
An amber PET medicine bottle with a volume of 115 ml and a pump with a glossy black and gold head form a single set into which you only need to pour the finished product. full description
Lowest price in the last 30 days: €1.30
Total for 1 pcs: €1.30
Quantities add up across all combinations of this bottle.
Product description
An amber PET medicine bottle with a volume of 115 ml and a pump with a glossy black and gold head form a single set into which you only need to pour the finished product. It is suitable for serums, face and hair oils, light emulsions, lotions and other liquid products that are dispensed in small amounts without tilting the bottle. The amber colour of the plastic reduces the amount of light reaching the contents, so light-sensitive products can also be filled into this medicine bottle. The clear overcap of the pump covers the head while still letting you see its black and gold finish.
What the set includes
- Amber medicine bottle, 115 ml – a PET bottle with an 18 mm thread. The plastic is light and does not break when dropped, which you will appreciate when shipping products by post or selling at markets.
- Plastic pump 18/415 – a PP pump with a glossy aluminium shell in black and gold. The dip tube reaches the bottom of the bottle, and the clear overcap protects the head from dust and accidental pressing during transport.
How to use the set
One press of the pump dispenses approximately 0.3 ml. This amount suits serums and concentrated oils, which are dispensed in drops, while with light emulsions and lotions you simply press several times. After filling and screwing on the pump, press it several times to prime it until the dip tube fills and the head starts dispensing evenly.
The consistency of the contents determines how comfortable the dispensing is. Liquid and medium-thick products pass through without problems. Thick creams, butters or products with scrub particles may block the head or be difficult to dispense. For such contents, we recommend filling one bottle as a test and checking how the product behaves after a few days.
Before the first filling, wash the bottle, rinse it with ethanol or isopropyl alcohol and leave it to dry completely. It is enough to rinse the pump and let it drain. Residual water in the dip tube would otherwise get into the product.
Nominal and total volume
The figure of 115 ml is the nominal volume, that is, the amount the medicine bottle is designed to hold when filled normally. The total volume of the bottle up to the rim of the neck is higher. The difference forms a reserve that is taken up by the submerged dip tube of the pump once it is screwed on. For this reason, fill the bottle to the nominal volume, not to the brim. If you filled it up to the neck, the dip tube would push part of the contents out and the pump could not be tightened.
Good to know
- Contact with cosmetics – both the bottle and the pump are declared as suitable for use with cosmetic products, and the set as a whole is intended for cosmetics. You will find the declarations of conformity for both components with the product.
- Contact with food – only the amber medicine bottle has a certificate for direct food contact on its own. The pump does not have one, so the set is not intended for food use.
- Reuse – you can wash the medicine bottle and the pump after emptying and use them again. Rinse the dip tube and the head with warm water and a small amount of surfactant and leave them to dry, otherwise residues of the old product will spoil the new contents.
- Other closures – other closures with the same neck type from the Handymade range can also be fitted to a medicine bottle with an 18 mm thread. For your own combination, we recommend checking the tightness and the behaviour of the packaging with your specific formulation.
- Recycling – take the set apart before disposal. The bottle is made of PET, and the pump combines PP and aluminium.
Do not expose PET to aggressive chemicals. For contents with a high proportion of essential oils, solvents or strong alcohol solutions, first check the compatibility of the material on one bottle and watch whether the wall turns cloudy or softens.
Frequently asked questions
Parameters
Plastic bottle, medicine bottle, brown, 115 ml
- Product color
- Amber
- Country of origin
- European Union
- Nominal capacity
- 115
- Diameter
- 44 mm
- Thread type
- G18x3
- Height
- 106,5 mm
Plastic pump dispenser, 18/415, glossy black and gold, clear top
- Country of origin
- European Union
- Diameter
- 25 mm
- Thread type
- 18/415
- Height
- 46 mm
- Tube length
- 100 mm
- Dose
- 0.3 ml
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.




































































