+421 950 333 113info@handymade.storeHandymade Days: −10 % on all ready-made productsShop now

GLASS BOTTLES 30 ml

Blue Glass Bottle, White Safety Cap & Dropper, 30 ml

Pack size5 ml10 ml15 ml30 ml50 ml100 ml

The blue glass medicine bottle with a dropper insert and a cap with a tamper-evident ring is packaging for serums, facial oils and other liquid preparations that are applied drop by drop. full description

AvailabilityIn stock · 183 pcs
Product codeO18SM030-OVV18PB4
€0.81incl. VAT

Lowest price in the last 30 days: €0.81

Volume pricing
1–109 pcs€0.81Your price
110–1099 pcs€0.78−4 % · 1× plato
1100–5059 pcs€0.74−9 % · 10× plato
from 5060 pcs€0.70−14 % · 46× plato

Total for 1 pcs: €0.81

Quantities add up across all combinations of this bottle.

Product description

The blue glass medicine bottle with a dropper insert and a cap with a tamper-evident ring is packaging for serums, facial oils and other liquid preparations that are applied drop by drop. Blue glass dims the light and so helps protect light-sensitive contents. The set consists of three parts: a glass bottle with a nominal volume of 30 ml, a short clear dropper insert that is pressed into the neck, and a white cap with an 18/410 neck finish.

A volume of 30 ml corresponds to the usual pack size of a facial serum or oil elixir, which customers know from drugstores and from smaller makers alike.


What it is suitable for

  • Facial serums – both water-based and oil-based serums are dispensed drop by drop from the dropper insert straight onto your fingers or skin.
  • Facial and body oils – blends of vegetable oils, optionally with essential oils.
  • Hair and beard oils – a small amount is dispensed precisely, without spilling.
  • Alcohol-based cosmetic preparations – tinctures and extracts that are added to a product drop by drop.
  • Samples and test batches – 30 ml is enough to test a formulation with customers before larger production.

Dispensing and closing

The dropper insert made of polypropylene (PP) is pressed into the neck of the filled bottle. When the bottle is tilted, the contents then come out drop by drop. Thinner preparations flow faster than thick oils. The cap is screwed over the dropper insert onto the 18/410 neck finish.

The cap has a tamper-evident ring that separates when the bottle is opened for the first time. Once the ring has separated, the cap can still be used to close the bottle as normal, but the ring cannot be restored.

A cap with a tamper-evident ring makes the most sense for finished products that go to the customer. The separated ring shows that nobody has opened the packaging after filling.


Nominal and total volume

The nominal volume is the amount the bottle is designed for in normal filling. The total brimful volume is the physical volume up to the top of the neck, and you will find it in the parameters. The difference between them is the reserve for the dropper insert, which extends into the neck. Fill the bottle to the nominal volume, not to the brim. If you filled it to the brim, the contents would be pushed out when the dropper insert is pressed in.


Good to know

  • Preparation before first filling – wash the bottle, dropper insert and cap, disinfect them with isopropyl alcohol or ethanol and leave them to dry completely.
  • Contact with cosmetics – all three parts of the set are declared suitable for contact with cosmetic products. The set is intended for cosmetics, not for food.
  • Materials – the bottle is made of glass, the dropper insert of PP and the cap of PP, HDPE and LDPE. For contents with a high proportion of essential oils or solvents, we recommend checking the behaviour of the dropper insert and the seal with your specific formulation.
  • Glass and heat – let hot contents cool before filling. A sudden change in temperature can damage the glass.
  • Reuse – after washing and disinfection, the bottle and dropper insert can be used again. The cap still seals after the ring has separated, but it no longer provides first-opening evidence.
  • Recycling – glass belongs in coloured glass collection, and the plastic parts are sorted separately as plastic.

Press the dropper insert into the neck only after filling. If you fill through a dropper insert that is already in place, filling is slow and the neck easily gets dirty, which impairs the seal of the cap.


Frequently asked questions

Does the blue glass bottle protect the contents from light?
Yes, blue glass dims the passage of light and helps protect light-sensitive contents. It is therefore suitable for blends of vegetable oils, serums with active ingredients or preparations with essential oils. Blue glass does not provide complete darkness. For this reason, store bottles with such contents away from direct sunlight and sources of heat.
Why is the 30 ml bottle not filled to the brim?
The bottle is filled to the nominal volume of 30 ml because the dropper insert needs the remaining space up to the neck. The dropper insert is pressed into the neck, and in a full bottle it would push part of the contents out. The total brimful volume is stated in the product parameters and is for reference only, not a fill volume.
What happens to the tamper-evident ring when the bottle is opened for the first time?
The tamper-evident ring separates from the cap when it is unscrewed for the first time. This shows that the bottle has been opened and serves as a tamper check for the finished product. After the ring has separated, the cap can still be used to close the bottle as normal, but the ring cannot be returned to its original state.
Can the glass medicine bottle with a dropper insert be reused?
Yes, the bottle and the dropper insert can be used again after thorough washing and disinfection. The cap seals even without the tamper-evident ring. For products intended for sale, however, we recommend a new cap, so that the customer again sees an intact ring.
Which closures fit this blue medicine bottle?
The bottle takes closures with an 18/410 neck finish, i.e. the same neck type as stated in the parameters. In the Handymade range you will find other caps and dropper inserts with this neck finish, as well as ready-made sets. If you are combining packaging and closure yourself, we recommend checking the seal, the dispensing and the behaviour with your specific formulation in advance.

Parameters

Glass bottle, vial, blue, 18 mm, 30 ml

Product colour
Blue
Country of origin
China
Nominal capacity
30
Brimful capacity
35 ml
Diameter
33 mm
Thread type
18/410
Height
78,8 mm
Product material
Glass

Plastic dropper for glass vials, 18 mm, short

Product colour
Clear
Country of origin
China
Diameter
14,5 mm
Thread type
18/410
Height
17,5 mm
Product material
PPPlastic

White Plastic Tamper Evident Safety Cap, 18/410

Product colour
White
Country of origin
China
Diameter
23,9 mm
Thread type
18/410
Height
23 mm
Product material
PPHDPEPlasticLDPE

Product documentation

PPWRPackaging Declaration (PPWR)
Glass bottle, vial, blue, 18 mm, 30 ml · O18SM030PDF ↓
Plastic dropper for glass vials, 18 mm, short · OVV18KKPDF ↓
PDSProduct Data Sheet
Glass bottle, vial, blue, 18 mm, 30 ml · O18SM030PDF ↓
Plastic dropper for glass vials, 18 mm, short · OVV18KKPDF ↓
White Plastic Tamper Evident Safety Cap, 18/410 · OVV18PB4PDF ↓
DrawingTechnical drawing
Glass bottle, vial, blue, 18 mm, 30 ml · O18SM030PDF ↓
White Plastic Tamper Evident Safety Cap, 18/410 · OVV18PB4PDF ↓
Download all (ZIP)

7 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.