GLASS BOTTLES 30 ml
Gloss Black Glass Bottle, White Oral Spray, 30 ml
Pack size10 ml15 ml30 ml50 ml100 ml
Glass bottle, black glossy, oral sprayer , 30 ml combines an opaque glass medicine bottle with a pump with a long nozzle that releases approximately 0.1 ml of liquid with each press. full description
Lowest price in the last 30 days: €1.59
Total for 1 pcs: €1.59
Quantities add up across all combinations of this bottle.
Product description
Glass bottle, black glossy, oral sprayer, 30 ml combines an opaque glass medicine bottle with a pump with a long nozzle that releases approximately 0.1 ml of liquid with each press. The black glass blocks light, so the contents are protected from its effects during use. The set is suitable for liquid cosmetic products that are applied precisely and in small doses: toners, aqueous solutions of active ingredients, light facial mists, scalp products or alcohol-based sprays. Both the bottle and the pump are declared as suitable for contact with cosmetics; you will find the declaration of conformity with the product.
The name “oral sprayer” refers to a type of pump head with an extended nozzle. The set as a whole is intended for cosmetics. Only the glass bottle has a certificate for direct food contact; the white pump does not have such a certificate, so we do not recommend the set for food purposes.
What the set is suitable for
- Toners and aqueous solutions – low viscosity passes through the mechanism without problems, and the small dose allows precise application without dripping.
- Scalp products – the long nozzle reaches between the hairs directly to the scalp, where the solution is dispersed instead of running down the hair.
- Alcohol-based sprays – refreshing sprays for hands or skin that are dosed in small amounts.
- Light-sensitive ingredients – aqueous solutions of vitamin C, niacinamide or extracts, where the opaque bottle slows down light-induced degradation.
- Samples and travel packs – the small volume is easy to take with you, and the glass bottle can be refilled after washing.
Dosing and filling
The pump works by pump action: when the head is pressed, it draws liquid up through the tube from the bottom and pushes it out through the nozzle as a spray. After filling and screwing on the pump, several empty presses are needed until the tube and the mechanism fill and the first dose comes out at full volume. Before fitting the pump for the first time, check that the tube reaches the bottom of the bottle and is not bent. If it is too long, shorten it with a straight diagonal cut.
The mechanism handles liquids with the consistency of water or a light oil. Thicker serums, gels and emulsions will clog the pump or come out in uneven drops instead of a spray. If your formulation contains a thickener, we recommend testing the dosing on a sample before you fill the whole batch.
The pump is made of polypropylene (PP). For products with a high proportion of essential oils or with solvents, we recommend checking that the nozzle and the seal remain functional after several weeks and that the scent of the contents does not change.
Nominal and total volume
The nominal volume is the amount the bottle is designed for in normal filling. The total brimful volume given in the parameters is the physical volume up to the neck. The difference between them is a reserve for the tube and the pump mechanism and for the slight expansion of the contents when the temperature changes. Fill to the nominal volume, not to the brim. An overfilled bottle will overflow when the pump is screwed on, and the liquid will remain in the thread.
Good to know
Before the first filling, wash the bottle, rinse it with ethanol or isopropyl alcohol and leave it to dry completely. Rinse the pump with clean water by pressing it several times and leave it to drain. Moisture in the bottle or in the tube dilutes the contents and increases the risk of microbial growth, especially in aqueous formulations without sufficient preservation.
Glass withstands repeated washing and disinfection, so you can use the bottle several times. It is better to avoid sudden temperature changes, for example hot water on cold glass. With repeated filling, it is advisable to replace the pump as well, or at least rinse it thoroughly, because residues of the previous contents remain inside the mechanism.
Opacity also has a practical consequence: you cannot see the level of the contents. The remaining amount can be estimated by weight or by the change in sound during dosing.
The bottle has an 18/410 neck finish. You will find other closures and droppers with the same type of neck, as well as ready-made combinations, in the Handymade range. If you make your own combination, we recommend checking the tightness, dosing and behaviour of the packaging with your specific formulation.
Black glass protects against light, not against air. For light-sensitive and oxidising ingredients, the choice of antioxidant and filling to the nominal volume remain important, so that as little air as possible remains in the bottle.
The bottle belongs in glass recycling; the pump is made of plastic marked PP 5 and is sorted separately.
Frequently asked questions
Parameters
Glossy black glass medicine bottle, 30 ml
Throat spray pump, white, 18/410
- Country of origin
- European Union
- Diameter
- 33,1 mm
- Thread type
- 18/410
- Height
- 42,8 mm
- Tube length
- 115 mm
- Dose
- 0,1 ml
Product documentation
- DrawingTechnical drawing
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.














































































