GLASS BOTTLES 50 ml
Gloss Black Glass Bottle, White Oral Spray, 50 ml
Pack size10 ml15 ml30 ml50 ml100 ml
Glass bottle, black glossy, oral sprayer 50 ml is a ready-made set for filling cosmetic sprays that are applied to one specific spot. full description
Lowest price in the last 30 days: €1.74
Total for 1 pcs: €1.74
Quantities add up across all combinations of this bottle.
Product description
Glass bottle, black glossy, oral sprayer 50 ml is a ready-made set for filling cosmetic sprays that are applied to one specific spot. The pump with a long nozzle delivers the contents where an ordinary sprayer cannot reach, and each press releases a small, consistent dose. The opaque black glass does not let light through, so the set suits formulations with essential oils, plant extracts and other ingredients that lose their scent or effect in light. Typical fillings are oral sprays for freshening breath, scalp sprays and tonics for targeted application.
How the set works
The medicine bottle has an 18/410 neck finish, and the pump screws directly onto it. When the head is pressed, the tube draws liquid from the bottom and the nozzle disperses it into a narrow stream. An ordinary mechanical sprayer produces a wide cloud, whereas here the contents go only to the chosen spot. The dose is metered, so it is easy to estimate the consumption per use and the number of applications from one filling.
What it is suitable for
- Oral sprays – cosmetic sprays for freshening breath, for example water-alcohol sprays with mint or eucalyptus essential oils.
- Scalp sprays – a tonic or infusion that is meant to reach the scalp directly through the hair.
- Targeted skin sprays – hydrosol or alcohol-based tonics for smaller areas, where a standard sprayer covers an unnecessarily wide area.
- Samples and travel packs – with a small dose, 50 ml lasts for a longer period and the glass does not absorb the scent of the contents.
The pump is not intended for thick emulsions or oils with a higher viscosity. The tube and nozzle are designed for liquids close to water. Before full-scale production, we therefore recommend checking that your formulation passes through the nozzle evenly and does not leave deposits in it.
Volume and filling
The nominal volume of 50 ml is the amount the bottle is designed for in normal filling. The brimful volume given in the parameters is the physical volume up to the neck. The difference between them forms a reserve for the tube and the body of the pump, which push part of the contents upwards once screwed on, and for the expansion of the liquid with changes in temperature. Fill to the nominal volume.
With alcohol-based sprays, leave a slightly larger reserve. Ethanol expands more than water when heated, and an overfilled bottle may overflow through the thread after the pump is screwed on.
Preparation and reuse
Before the first filling, wash the bottle with warm water, disinfect it with isopropyl alcohol or ethanol and leave it to dry completely with the neck facing down. Rinse the pump with clean water and press it several times without any contents, so that the water runs out of the tube.
The glass withstands repeated washing and disinfection with alcohol without any change in its properties. For further use, the pump is more important. After alcohol-based or strongly aromatic fillings, the scent is not washed out of the tube and nozzle completely, so when you change the type of product, replace the pump with a new one and use the bottle again. Do not expose the glass to sudden changes in temperature, as hot water in a cold bottle may cause it to crack.
The set as a whole is intended for cosmetics. Only the glass bottle on its own has a certificate for direct contact with food; the pump does not have such a certificate. Do not use the set for homemade syrups, herbal infusions or other food liquids.
Good to know
Both components are declared as suitable for use with cosmetic products, and an EU declaration of conformity has been issued for each of them.
The 18/410 neck finish also accepts other closures with the same type of thread from the Handymade range, where you will also find ready-made combinations. If you make your own combination, we recommend checking the tightness, dispensing and behaviour of the packaging with your specific formulation.
The glossy black surface does not allow you to see the level or any cloudiness of the contents. The remaining contents are checked by weighing or shaking the bottle. For formulations where you need to monitor stability by eye, test them first in clear glass and use the black bottle only for a finished, verified product.
After you finish using it, the set is taken apart: the glass bottle belongs in glass recycling, and the polypropylene pump is sorted with plastics.
Frequently asked questions
Parameters
Glass bottle, black glossy vial, 50 ml
Throat spray pump, white, 18/410
- Country of origin
- European Union
- Diameter
- 33,1 mm
- Thread type
- 18/410
- Height
- 42,8 mm
- Tube length
- 115 mm
- Dose
- 0,1 ml
Product documentation
- DrawingTechnical drawing
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.











































































