GLASS BOTTLES 15 ml
White Glass Bottle, White Spray, 15 ml
Pack size10 ml15 ml30 ml100 ml
The glass bottle with fine mist sprayer, 15 ml , is a ready-assembled set for liquid products applied by spraying: facial toners, hydrosols, refreshing face and body mists or hair sprays. full description
Lowest price in the last 30 days: €1.58
Total for 1 pcs: €1.58
Quantities add up across all combinations of this bottle.
Product description
The glass bottle with fine mist sprayer, 15 ml, is a ready-assembled set for liquid products applied by spraying: facial toners, hydrosols, refreshing face and body mists or hair sprays. The white glass conceals the contents and reduces the amount of light that reaches them, which you will appreciate with hydrosols and toners containing plant extracts or vitamins. The small volume suits samples, test batches and travel. The sprayer is part of the set, so the bottle does not need a separate closure.
The set is declared suitable for contact with cosmetics. The declaration of conformity and the technical documentation are provided with the product. It has no certificate for contact with food, so we do not recommend it for food sprays.
What it is suitable for
- Toners and hydrosols – low-viscosity water-based products are dispensed evenly through the sprayer, with no finger contact with the contents.
- Face and hair mists – a small pack for your handbag or desk, where the product is used several times a day.
- Alcohol-based products – eaux de parfum and alcohol-based toners in a travel size.
- Customer samples – 15 ml is enough to try a product, and the white glass looks uniform with contents of different colours.
Thick serums, oils and gel products are not suitable for the sprayer. The nozzle only sprays thin liquids; thicker contents block it or come out as drops instead of a mist.
Filling and volume
The nominal volume is the volume the bottle is designed for in normal filling. The total brimful volume is the physical volume up to the neck, and you will find it in the parameters. The difference between the two provides room for the sprayer’s dip tube and for the contents to expand with changes in temperature. Fill only up to the nominal volume. A bottle filled to the brim overflows when the sprayer is screwed on.
The sprayer’s dip tube is longer than the bottle. Before first use, shorten it with a diagonal cut so that it ends just above the bottom. A diagonal end does not stick to the glass, and the sprayer draws up even the last millilitres.
One press releases approximately 0.13 ml. You can use this figure when writing instructions for use and when estimating how many applications a pack will last.
Good to know
Before first filling, wash the bottle, disinfect it with isopropyl alcohol or ethanol and leave it to dry completely. Treat the sprayer in the same way: rinse it with clean water, then with alcohol, and pump it several times out of the liquid so that any remaining liquid is expelled from the dip tube and nozzle.
Glass does not tolerate sudden changes in temperature. Pour in the product only once it has cooled; a hot liquid in a cold bottle may crack the glass.
The set is not intended for freezing or for high temperatures, for example in a car in the sun. Store the empty packaging in a dry and clean place.
Reuse is possible if the bottle and the sprayer are thoroughly washed and disinfected after emptying. When changing the contents, for example from an alcohol-based toner to a hydrosol, we recommend replacing the sprayer, as traces of fragrance cannot be washed out of the plastic completely. Put the glass in glass recycling and the polypropylene sprayer in plastics recycling.
Frequently asked questions
Parameters
Glass bottle, vial, white, 15 ml
Product documentation
- PPWRPackaging Declaration (PPWR)
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.


























































































