Yes, this glass medicine bottle can be used repeatedly if hygienic principles are followed, for example when refilling with the same type of solution. Before each new filling, it is necessary to thoroughly clean and disinfect the entire container, including the spray mechanism. For disinfection, we recommend using a suitable alcohol-based product, for example IPA 99% isopropyl alcohol or Ethanol 96% denatured, plant-based. Only after thorough drying and checking of functionality is the bottle ready for reuse.

First, rinse the packaging thoroughly with a suitable cleaning solution and drinking water, removing all residues of the previous refill. Then disinfect the inside of the glass bottle and the parts that are in contact with the contents using an alcohol-based product, for example IPA 99% isopropyl alcohol or Ethanol 96% denatured, plant-based. After disinfection, allow all components to dry freely at room temperature and only then reassemble and fill the medicine bottle. For new or sensitive formulations, always carry out a test filling in a smaller volume.

To make it easier to choose packaging, you can use the advanced filter, which is available at the top of the page after clicking on the relevant packaging category. In the advanced filter you can conveniently select parameters such as neck type, size, colour and material of the packaging, as well as other specifics if needed. In this way, you can quickly narrow down the offer to medicine bottles, bottles or other containers that best match your product and dosing method.

The throat spray is designed primarily for homogeneous, low-viscosity solutions without solid particles. Thick formulations, gels or solutions with undissolved herbal particles can reduce the quality of atomization or gradually clog the mechanism. When developing a new recipe, we recommend testing the consistency and filtration of the refill in a small amount to verify that the spraying is fine, even and without clogging of the nozzle.

If you decide not to reuse the medicine bottle, we recommend recycling it according to the information given in the product parameters. The glass container can generally be placed in the appropriate glass collection container after removal of product residues and separation of plastic or metal parts. Recycle the spray mechanism and small components according to their material composition and local waste sorting rules. Always follow the data and recycling symbols given for the specific product on the website and the recommendations of your collection system.

When filling, it is important to work in a clean environment and use suitable tools in order to minimize the introduction of impurities into the refill. Do not overfill the medicine bottle and leave enough space for the correct functioning of the spray mechanism. After closing, we recommend storing the bottle in a vertical position, away from direct sunlight and sources of heat, in order to preserve the stability of the ingredients. Before placing the final product on the market or using it regularly, always test the longer-term behaviour of the recipe in the packaging – whether there are any changes in fragrance, colour or in the function of the sprayer.