GLASS BOTTLES up to 10 ml
Amber Glass Bottle, Type B, Slim, Black Spray, 10 ml
The amber glass medicine bottle with fine mist sprayer, 10 ml , is designed for small packs of water-based and alcohol-based preparations applied as a fine mist. full description
Lowest price in the last 30 days: €0.62
Total for 1 pcs: €0.62
Quantities add up across all combinations of this bottle.
Add 99 more pcs and the price drops to €0.57/pc.
Product description
The amber glass medicine bottle with fine mist sprayer, 10 ml, is designed for small packs of water-based and alcohol-based preparations applied as a fine mist. Amber glass filters out light, so light-sensitive contents, such as hydrosols, facial toners or perfume waters with essential oils, keep their quality longer than in clear packaging. The set is supplied as a bottle and sprayer together, so you do not need to look for a closure that fits the right neck.
The small volume makes this packaging suitable for samples, test batches, travel packs and products used up in small amounts: refreshing facial mists, perfume waters, hair tonics, alcohol-based hand sprays or alcohol-based tinctures for the skin. The black sprayer with a clear dip tube looks discreet on amber glass.
What it is suitable for
- Hydrosols and toners – water-based solutions without a thickener pass through the sprayer without any problem, and amber glass protects them from light.
- Perfume and alcohol-based preparations – glass does not react with ethanol or with fragrance components, so the bottle is suitable for perfume waters, hair mists and alcohol-based sprays.
- Samples and travel packs – 10 ml is enough for several weeks of use and for checking how the product performs for the customer.
- Hand sprays – the fine mist spreads a small amount of liquid over a larger area.
How to work with the set
The sprayer delivers a dose of approximately 0.14 ml per press. From a full bottle you therefore get roughly 70 presses, depending on the nature of the contents and how thoroughly you empty it. The dip tube reaches the bottom of the bottle, so almost all of the contents are used up.
Before the first filling, wash the bottle, disinfect it with ethanol or isopropyl alcohol and let it dry completely. It is enough to rinse the sprayer with clean water or alcohol and let it drain. Repeat the same procedure before every refill, especially if you change the type of contents.
The dip tube of the sprayer is longer than the bottle. Before first use, shorten it with a sharp knife or scissors so that its end reaches just above the bottom. A slanted cut makes it easier to draw up the last millilitres.
Nominal and total volume
The nominal volume is the amount the packaging is designed for under normal filling. The total volume to the brim, given in the parameters, is the physical volume up to the neck. The difference between them is a reserve for the dip tube of the sprayer and for the expansion of the contents when the temperature changes. The bottle should therefore be filled to the nominal volume, not to the brim. An overfilled bottle overflows when the sprayer is fitted and is harder to tighten when closed.
Good to know
The sprayer is designed for thin, watery liquids. Thick oils, serums with a thickener or emulsions with higher viscosity spray unevenly or not at all; packaging with a dropper or a pump is more suitable for them. For preparations with a high proportion of essential oils or solvents, we recommend checking how the plastic parts of the sprayer behave with your specific formulation, especially after several weeks of storage.
Glass withstands heat and alcohol, but not sudden temperature changes. The packaging can be reused as long as the glass is not chipped and the sprayer draws up the liquid without sticking.
Let hot contents cool to at least room temperature before filling.
The set as a whole is declared as suitable for contact with cosmetic products. Only the glass bottle on its own has a certificate for direct food contact; the sprayer does not, so the set is not listed as food packaging.
You can find other closures with the same neck type and ready-made combinations in the Handymade range. If you make your own combination, we recommend checking the tightness, the dispensing and the behaviour of the packaging with your specific formulation.
After use, the glass is sorted into glass waste and the sprayer into plastic, so the set should be taken apart before disposal.
Frequently asked questions
Parameters
Glass bottle, vial type B, tall, 18 mm, 10 ml
- Product colour
- Brown
- Country of origin
- European Union
- Nominal capacity
- 10
- Brimful capacity
- 12 ml
- Diameter
- 24,2 mm
- Thread type
- 18/410
- Height
- 63,7 mm
- Product material
- Glass
Plastic fine mist sprayer, 18/415, black, 115 mm
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.
























































































