+421 950 333 113info@handymade.storeActive Days: −10 % with code ACTIVE10Shop now

GLASS BOTTLES up to 10 ml

Ambre Glass Bottle, White Lotion Pump, 10 ml

Pack size10 ml15 ml30 ml50 ml100 ml

The amber glass medicine bottle with a 10 ml capacity and a white lotion pump is ready-to-use packaging for small quantities of creams, eye creams and thicker serums. full description

AvailabilityIn stock · 463 pcs
Product codeO18SH010-OVD18PB2
€0.62incl. VAT

Lowest price in the last 30 days: €0.62

Volume pricing
1–199 pcs€0.62Your price
200–999 pcs€0.57−8 %
1000–4999 pcs€0.54−13 %
from 5000 pcs€0.49−22 %

Total for 1 pcs: €0.62

Quantities add up across all combinations of this bottle.

Product description

The amber glass medicine bottle with a 10 ml capacity and a white lotion pump is ready-to-use packaging for small quantities of creams, eye creams and thicker serums. The dark glass filters light, so products containing vegetable oils, vitamins and other light-sensitive ingredients stay effective for longer. The pump dispenses a small, consistently similar amount with every press. The contents are not scooped out with fingers, so the risk of introducing impurities into the bottle is lower than with a jar. The set as a whole is declared suitable for contact with cosmetics.


What it is good for

  • Eye creams and lip creams – they are applied in small amounts, so the small volume and the small dose of the pump are a good fit.
  • Concentrated serums and active creams – with more expensive ingredients, a small pack is used up before it can lose its effectiveness.
  • Samples and trial batches – you can divide a new formulation into several bottles for stability testing or hand it out to customers to try.
  • Travel packs – a glass bottle with a pump takes up minimal space in a cosmetics bag.

How the pump works

One press dispenses approximately 0.14 ml, so a full bottle gives you about 70 doses. For an eye cream or serum this is a convenient amount for a single application, while for a body cream it would be too small. The pump draws the contents up through a tube from the bottom and is suitable for creams, gel serums and light to medium-thick emulsions. With very thin liquids, such as toners or pure oils, and, conversely, with dense balms, its behaviour varies depending on the specific formulation. We recommend testing it beforehand.

Once assembled, the pump tube is longer than the height of the bottle allows. Shorten it with a sharp knife so that it reaches just above the bottom. The pump can then empty the contents almost down to the last dose.


Nominal and total volume

The nominal volume of 10 ml is the amount the bottle is designed for in normal filling. The brimful capacity given in the parameters is the physical volume up to the neck. The difference between them is the allowance for the tube and the body of the pump. The bottle should therefore be filled to the nominal volume, not to the brim, otherwise part of the contents will overflow when the pump is screwed on.


Good to know

  • Preparation before first filling – wash the bottle and the pump, disinfect them with isopropyl alcohol or ethanol and let them dry completely.
  • Filling – let the emulsion cool to room temperature before filling. Hot contents can damage the plastic pump and its tube.
  • Reuse – the glass bottle can be reused after washing and disinfecting. After rinsing, the pump can be used again for the same type of product, but we recommend a new one if you change the formulation.
  • Food – only the glass medicine bottle on its own has a certificate for direct food contact. The pump does not have one, and the set as a whole is intended for cosmetics.
  • Other closures – other closures with the same neck finish, which is given in the parameters, will also fit the bottle, and you can find ready-made combinations in the Handymade range. If you make your own combination, check the tightness and dispensing with your specific formulation.
  • Recycling – separate the glass and the plastic pump before disposal; glass goes with glass, the pump with plastics.

Amber glass together with a pump, which limits contact of the contents with fingers and air, forms a good basis for products with sensitive active ingredients, such as vitamin C, retinol or unsaturated vegetable oils.


Frequently asked questions

Does the 10 ml amber glass medicine bottle protect the contents from light?
Yes, amber glass filters the passage of light and slows the breakdown of light-sensitive ingredients. For vegetable oils, vitamins and antioxidants in creams, this is an advantage over a clear glass bottle. However, it does not replace complete protection from light, so store the packaging away from direct sunlight.
How many doses of cream fit in a 10 ml medicine bottle with a pump?
Approximately 70 doses, because one press of the pump dispenses about 0.14 ml. The actual number depends on the thickness of the product and on how far the tube reaches after shortening. For an eye cream or serum, one dose corresponds to the usual amount for a single application.
Is the medicine bottle and pump set suitable for contact with food?
No, the set as a whole is intended for cosmetics. Only the glass medicine bottle on its own has a certificate for direct food contact; the plastic lotion pump does not have one. For food, use a bottle with a closure that has a food contact certificate.
Can the glass medicine bottle with a pump be reused?
Yes, the glass bottle can be reused after thorough washing, disinfection with ethanol and drying. The pump can be rinsed and used again for the same type of product, but residues of the old emulsion in the tube and mechanism are harder to clean. If you change the formulation, it is more reliable to use a new pump.
Is the lotion pump also suitable for oil or toner?
The pump is designed for creams and emulsions; with very thin liquids, test it beforehand. A thin oil or toner may be dispensed unevenly or drip from the pump. For liquid products, a dropper or a fine mist sprayer with the same neck finish is usually more suitable.

Parameters

Amber Glass Bottle, Type A, 10 ml

Product colour
Brown
Country of origin
European Union
Nominal capacity
10
Brimful capacity
14 ml
Diameter
25 mm
Thread type
18/410
Height
60,7 mm
Product material
Glass

Plastic cream dispenser, 18 mm, white

Product colour
WhiteClear
Country of origin
China
Diameter
22,2 mm
Thread type
18/415
Height
40,2 mm
Tube length
115 mm
Dose
0,14 ml

Product documentation

PPWRPackaging Declaration (PPWR)
Amber Glass Bottle, Type A, 10 ml · O18SH010PDF ↓
PDSProduct Data Sheet
Amber Glass Bottle, Type A, 10 ml · O18SH010PDF ↓
Plastic cream dispenser, 18 mm, white · OVD18PB2PDF ↓
DrawingTechnical drawing
Amber Glass Bottle, Type A, 10 ml · O18SH010PDF ↓
Plastic cream dispenser, 18 mm, white · OVD18PB2PDF ↓
Download all (ZIP)

5 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.