+421 950 333 113info@handymade.storeHandymade Days: −10 % on all ready-made productsShop now

GLASS BOTTLES 50 ml

Blue Glass Bottle, Black Fine Mist Sprayer, Black Overcap, 50 ml

Pack size10 ml15 ml30 ml50 ml100 ml

The blue glass bottle with a black fine mist sprayer is a ready-made set for water-based and alcohol-based preparations applied as a fine mist: facial toners, hydrosols , refreshing face and body sprays, hair sprays or… full description

AvailabilityIn stock · 7 pcs
Product codeO18SM050-OVR18PC3
€0.97incl. VAT

Lowest price in the last 30 days: €0.97

Volume pricing
1–116 pcs€0.97Your price
117–1052 pcs€0.89−8 % · 1× plato
1053–5030 pcs€0.82−15 % · 9× plato
from 5031 pcs€0.73−25 % · 43× plato

Total for 1 pcs: €0.97

Quantities add up across all combinations of this bottle.

Product description

The blue glass bottle with a black fine mist sprayer is a ready-made set for water-based and alcohol-based preparations applied as a fine mist: facial toners, hydrosols, refreshing face and body sprays, hair sprays or alcohol-based hand solutions. The sprayer fits the bottle straight out of the pack, so there is no need to look for or test another closure.

The set is declared suitable for contact with cosmetics. The 50 ml volume is enough for a travel size, customer samples and first trial batches that you do not yet want to pour into large bottles.


What it is suitable for

  • Toners and hydrosols – the sprayer distributes thin water-based solutions evenly over the skin, without pouring them into your palm.
  • Alcohol-based sprays – solutions with a higher proportion of ethanol, from facial toners to hand solutions.
  • Hair and body sprays – light water-based sprays with moisturising ingredients or scented body mists with low viscosity.
  • Samples and travel – a small volume in a glass bottle with a screw-on sprayer instead of an ordinary cap.

Filling and volume

The bottle states a nominal volume of 50 ml. This is the amount the packaging is designed for in normal filling. The total brimful volume, that is the physical volume up to the neck, is slightly larger and you will find it in the parameters. The difference between them is a reserve for the sprayer tube and the immersed part of the closure. Fill up to the nominal volume, not to the brim, otherwise the contents will be pushed out when the sprayer is screwed on.

One press releases approximately 0.14 ml. Before first use, press the sprayer several times to prime it until the tube fills and the mist becomes even.

The sprayer tube is longer than the bottle, so it bends at the bottom. Shorten it with a sharp knife using a slanted cut just above the bottom of the bottle. A slanted cut draws up even the last millilitres of the contents.


Good to know

Before first filling, wash the bottle and the sprayer, disinfect them with isopropyl alcohol or ethanol and let them dry completely. Residual water in the tube or the neck would dilute the preparation.

Glass does not tolerate sudden temperature changes. Pour in the contents once they have cooled to room temperature, not straight from the pot after heating the water phase. The sprayer is made of polypropylene (PP) and is declared suitable for contact with cosmetics. For solutions with a high proportion of essential oils or solvents, we recommend checking how the mechanism behaves on one piece before a larger production run.

The sprayer is designed for thin water-based and alcohol-based liquids. Oils, oil serums and thicker emulsions clog the mechanism or come out in a stream instead of a mist. For oil-based preparations, choose a bottle with a dropper or a pump.

You can use the bottle repeatedly. After emptying it, wash it with warm water and washing-up liquid, rinse, disinfect and dry it. Rinse the sprayer by pressing it several times with clean water and then with ethanol until clear liquid comes out. If the mist weakens over time or the mechanism sticks, replace only the sprayer – the bottle stays.

For recycling, the bottle belongs in glass and the sprayer in plastics; separate them before disposal.


Frequently asked questions

Does the sprayer fit this bottle if it has a different thread number?
Yes, a sprayer with an 18/415 neck finish fits a bottle with an 18/410 neck finish and the set fits together. We supply it as a pre-tested pair, so you do not need to choose or test a closure. If you pair the bottle with another closure from our range, we recommend checking the seal on one piece.
How much liquid fits in a 50 ml bottle with a sprayer?
Fill it up to the nominal volume of 50 ml, even though the physical brimful volume is larger. The reserve above the nominal volume is taken up by the immersed sprayer tube and part of the closure. If you fill the bottle to the neck, part of the contents will be pushed out when the sprayer is screwed on and the closure may not seat properly.
Can oil or an oil serum be sprayed with this set?
No, the sprayer is designed for thin water-based and alcohol-based liquids. Oils and oil serums are thicker, so the mechanism either fails to draw them up or pushes them out in a stream instead of a fine mist, and it clogs over time. For oil-based preparations, choose a bottle with a dropper or a pump and keep the sprayer for toners, hydrosols and sprays.
Is the set suitable for alcohol-based toners and hand solutions?
Yes, a glass bottle with a PP sprayer is a common choice for alcohol-based preparations. Both components are declared suitable for contact with cosmetics. For solutions with a high proportion of essential oils, we recommend testing one piece and checking after a few weeks that the sprayer still seals and dispenses evenly.
Is the glass bottle with a sprayer also suitable for food?
No, the set is not declared suitable for contact with food; it is intended for cosmetics. The bottle and the sprayer both carry a declaration of suitability for cosmetic products, and neither component has a declaration for food use. For food, choose packaging where suitability for food contact is stated directly in the parameters.
How do I clean a bottle with a sprayer and use it again?
Wash the bottle with warm water and washing-up liquid, rinse it, disinfect it with ethanol or isopropyl alcohol and let it dry. Clean the sprayer by pressing it repeatedly, first with clean water and then with ethanol, until clear liquid comes out. If the mist weakens or the mechanism does not engage, replace just the sprayer – the glass bottle can be used again.

Parameters

Glass bottle, pharmaceutical, blue, 18 mm, 50 ml

Product colour
Blue
Country of origin
China
Nominal capacity
50
Brimful capacity
57 ml
Diameter
37,2 mm
Thread type
18/410
Height
92,2 mm
Product material
Glass

Plastic fine mist sprayer, 18/415, black top, 115 mm

Product colour
Black
Country of origin
China
Diameter
22,3 mm
Thread type
18/415
Height
40,01 mm
Tube length
115 mm
Dose
0,14 ml

Product documentation

PPWRPackaging Declaration (PPWR)
Glass bottle, pharmaceutical, blue, 18 mm, 50 ml · O18SM050PDF ↓
PDSProduct Data Sheet
Glass bottle, pharmaceutical, blue, 18 mm, 50 ml · O18SM050PDF ↓
Plastic fine mist sprayer, 18/415, black top, 115 mm · OVR18PC3PDF ↓
DrawingTechnical drawing
Glass bottle, pharmaceutical, blue, 18 mm, 50 ml · O18SM050PDF ↓
Plastic fine mist sprayer, 18/415, black top, 115 mm · OVR18PC3PDF ↓
Download all (ZIP)

5 PDF files in one archive

Silvia R.13 Nov 2026ES

Verified purchase