Blue Glass Bottle, Black Fine Mist Sprayer, Black Overcap, 15 ml

The 15 ml glass bottle with a black fine mist sprayer is packaging for your own facial mists, toners, hydrosols and perfume waters in a quantity that fits in a bag and a cosmetic bag. The sprayer disperses the liquid into a fine mist, so the product is applied evenly and without your fingers touching the contents.

The set is supplied as a ready-made pair of bottle and closure that fit together. You do not need to choose a closure to match the neck or test the seal – just fill and screw it on.

What it is used for

• Facial mists and toners – thin water-based solutions are sprayed evenly and in small amounts, which suits application to the face.
• Hydrosols – a small volume is used up before pure hydrosol without a preservative starts to lose its freshness.
• Perfume waters and refreshing sprays – alcohol-based solutions with a fragrance composition, also suitable as a travel size or a sample.
• Samples and recipe testing – when fine-tuning a new formulation, it is enough to prepare 15 ml and check the fragrance, the feel on the skin and the behaviour in the spray.

Good to know

The sprayer is intended for low-viscosity liquids: water, hydrosols, alcohol-based solutions and very thin solubilised blends. A thick serum, gel or oil will not pass through the nozzle or will be dispensed unevenly. With solubilised essential oils, we recommend checking that the blend stays clear and that no deposits form in the nozzle after a few days.

One press releases approximately 0.14 ml, which corresponds to a fine mist for part of the face or the décolletage area. With toners thickened with glycerine, the dose and the shape of the mist change, so it is worth testing the final recipe directly in this sprayer.

Nominal volume is the amount the bottle is designed for with normal filling. Brimful volume is the physical volume up to the neck. The difference provides a reserve for the sprayer's dip tube and for the contents that rise when the closure is screwed on. Fill to the nominal volume, not to the brim, otherwise part of the contents will be pushed out when you screw on the closure.

The sprayer has a declaration of suitability for use with cosmetic products, and the glass bottle is supplied in cosmetic grade. The set is not intended for contact with food.

Before the first filling, wash the bottle, rinse it with alcohol or isopropyl alcohol and let it dry completely. Flush the sprayer by spraying clean water and then alcohol, so that both the nozzle and the dip tube are cleaned. The same procedure applies when reusing it. Residues of fragrance compositions are harder to remove from plastic than from glass, so when changing the fragrance significantly, expect a trace of the original contents to linger for a while.

The sprayer is made of polypropylene (PP). With higher concentrations of essential oils or with solvents, we recommend checking after several weeks whether the nozzle still dispenses the same as it did at the start.

Closures with the same neck type as given in the bottle parameters, and ready-made combinations of packaging plus closure, can be found in the Handymade range. If you make your own combination, check the seal, the dispensing and the behaviour of the packaging with your specific formulation.

After use, the glass belongs in glass waste and the sprayer in plastic waste; separate them when sorting.

Frequently asked questions