GLASS BOTTLES 30 ml
Clear Glass Bottle, Glossy Gold Black Spray, Smoky Overcap, 30 ml
Pack size10 ml12 ml15 ml30 ml50 ml100 ml
A glass bottle with a fine mist sprayer for toners, hydrosols, perfume waters and refreshing sprays that are applied in small doses. full description
Lowest price in the last 30 days: €1.04
Total for 1 pcs: €1.04
Quantities add up across all combinations of this bottle.
Product description
A glass bottle with a fine mist sprayer for toners, hydrosols, perfume waters and refreshing sprays that are applied in small doses. The bottle and the black and gold fine mist sprayer with a smoky overcap form one set, so you do not need to buy or match a closure separately. Clear glass lets the contents stand out, so it suits tinted toners, floral waters or your own perfumes where the colour should be visible. The 30 ml volume suits travel packs, samples for customers and small batches that are used up quickly.
The glossy black and gold fine mist sprayer and the dark overcap give the small bottle the look of a finished perfume pack. It can therefore also be used for gift sets or for sale without any further packaging.
What it is suitable for
- Toners and hydrosols – thin water-based solutions are sprayed evenly, and a small dose is enough to refresh the skin without running.
- Perfume and body waters – alcohol-based fragrance solutions are among the most common fills for this format, and the sprayer disperses them into a fine mist.
- Hair and refreshing sprays – light water-based or water-alcohol formulations in a volume that fits in a handbag.
- Samples and trial batches – you can hand out samples of a new formulation for testing without filling large bottles.
Sprayer and dispensing
The sprayer draws the contents through a dip tube that reaches the bottom of the bottle, so it dispenses even when the level is low. Each press releases a small and consistent amount, so the product is applied evenly and without spillage. The smoky overcap covers the nozzle and protects it from dust and from accidental pressing during transport.
Thin water-based and alcohol-based liquids dispense best. Thicker formulations, gels and pure vegetable oils may come out as a stream instead of a mist, or may clog the nozzle over time. With such contents, test the dispensing beforehand on a small amount and check after a few days that the sprayer works in the same way.
The bottle is intended to be filled up to its nominal volume of 30 ml, and the total brimful volume is given in the parameters. The difference between them is a reserve for the sprayer with its dip tube and for the expansion of the contents when the temperature changes. An overfilled bottle will overflow once the sprayer is screwed on.
After filling, press the sprayer several times to prime it until the dip tube fills and mist starts to come out. Only then close the bottle with the overcap and store or wrap it.
Good to know
- Light – clear glass does not protect the contents from light. Store formulations with light-sensitive ingredients in the dark, or choose amber or blue glass for them.
- Preparation before first filling – wash the bottle, disinfect it with isopropyl alcohol or ethanol and let it dry completely. Pump pure alcohol or boiled water through the sprayer and let it drip off.
- Reuse – the glass withstands repeated washing and disinfection. After use with perfume or oil-based contents, the sprayer is cleaned by pumping ethanol through it. If it stays clogged, replace it with a new one.
- Plastic and strong solvents – the sprayer combines plastic and aluminium. With formulations containing a high proportion of essential oils or other solvents, set aside a filled test sample for several weeks and check that the sprayer stays tight and dispenses without any change.
- Contact with cosmetics – both the bottle and the sprayer are declared suitable for use with cosmetic products, and the declaration of conformity is available with the product. The set has no certificate for contact with food and is intended for cosmetics.
- Recycling – glass goes with glass, while the sprayer is a combination of plastic and metal and is sorted separately from the bottle.
The bottle has a neck with the thread type given in the parameters. You can find other closures with the same neck and ready-made combinations in the Handymade range. If you make your own combination, check the tightness and how the closure behaves with your specific formulation.
Before shipping or travelling, check that the sprayer is tightened and the overcap is fitted. Transport the bottle upright, because alcohol-based contents may leak around the thread when the bottle is tilted.
Frequently asked questions
Parameters
Glass bottle, clear, 18 mm, 30 ml
Product documentation
- PPWRPackaging Declaration (PPWR)
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.























































































