GLASS BOTTLES up to 10 ml
Clear Glass Bottle, Glossy Gold Black Spray, Smoky Overcap, 10 ml
Pack size10 ml12 ml15 ml30 ml50 ml100 ml
This 10 ml glass bottle with a black and gold fine mist sprayer and smoky overcap is used mainly for small perfume packs , fragrance samples, travel-size eau de toilette and small facial or hair sprays. full description
Lowest price in the last 30 days: €0.95
Total for 1 pcs: €0.95
Quantities add up across all combinations of this bottle.
Product description
This 10 ml glass bottle with a black and gold fine mist sprayer and smoky overcap is used mainly for small perfume packs, fragrance samples, travel-size eau de toilette and small facial or hair sprays. The clear glass shows the colour of the contents and how much is left. The sprayer disperses the contents into a fine mist and releases approximately 0.14 ml per press, so it suits alcohol-based and water-based products that are applied in small amounts.
The set is declared suitable for contact with cosmetics. It is not intended for food. The bottle has a medicine bottle shape with a narrow 18 mm neck, the sprayer fits directly onto it and the two are supplied together as one unit.
What the set is suitable for
- Perfumes and fragrance samples – the 10 ml volume corresponds to a standard tester or travel pack, and the fine mist spreads an alcohol-based composition evenly over skin or fabric.
- Eau de toilette and eau de cologne – thin alcohol-based solutions pass through the sprayer without clogging.
- Hydrosols and toners in a small pack – for travel, a handbag or as a gift format, always with preservation appropriate to the water content.
- Hair fragrances and refreshing sprays – wherever you need a small dose spread over a wide area.
Nominal volume and brimful capacity
The bottle is intended to be filled up to the nominal volume of 10 ml. The total brimful capacity is larger and you can find it in the parameters. The difference provides a reserve for the sprayer dip tube, which pushes part of the contents upwards when fitted, and also room for the alcohol to expand when the temperature changes. If you fill the bottle up to the neck, the contents will be pushed out through the thread once the sprayer is fitted.
The sprayer dip tube is longer than the height of the bottle. Before the first fitting, shorten it with an angled cut so that it reaches just above the bottom. The angled cut prevents the tube from sticking to the glass, and the contents can be used up almost completely.
How to use the set
Before the first filling, wash the bottle with warm water, rinse it with ethanol or isopropyl alcohol and leave it to dry completely with the neck facing down. Flush the sprayer by pumping pure alcohol or water through it several times, and then air. Fill the bottle through the narrow neck using a funnel or a syringe. For perfumes, it is advisable to fill only after the composition has matured, so that no undissolved particles get into the bottle.
After fitting, tighten the sprayer by hand. The first several presses fill the dip tube and the mechanism, and only then does the full dose appear. The smoky overcap protects the nozzle from dirt and from accidental pressing in a handbag.
Clear glass does not protect against light. Perfume compositions with sensitive ingredients, natural dyes and extracts should be stored away from direct sunlight or in a box. For contents that are to be exposed to light for a long time, dark glass is more suitable.
Good to know
Glass resists alcohol and essential oils and does not absorb the scent of the contents, so after cleaning the bottle can be reused for a different fragrance. The sprayer has plastic parts that come into contact with the contents. For concentrated fragrance oils and a high proportion of essential oils, we recommend checking whether the plastic softens, discolours or absorbs the scent over time. Glass does not tolerate sudden temperature changes, so do not fill the bottle with hot contents.
Oil-based products are not a suitable filling for this sprayer. The mechanism is designed for liquids with a viscosity close to water. Thicker contents will be dispersed unevenly or not at all. If you combine the bottle with another closure with the same neck type, we recommend verifying the tightness and dispensing with your specific formulation. You can find ready-made sets and other closures in the Handymade range.
After use, the glass bottle belongs in the glass recycling bin. The sprayer is made of plastic and aluminium and is collected separately from glass.
Frequently asked questions
Parameters
Glass bottle, vial, 18 mm, clear, 10 ml
Product documentation
- PPWRPackaging Declaration (PPWR)
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.




















































































