Green Glass Bottle, Glossy Gold White Spray, 30 ml

A glass bottle with a sprayer for 30 ml of your own tonics, hydrosols and facial mists. The set consists of a green glass medicine bottle and a white and gold fine mist sprayer with a glossy finish. Green glass lets through less light than clear glass, while the contents remain visible, so you can see how much product is left in the bottle. The sprayer screws onto the neck of the medicine bottle and its tube reaches the bottom of the bottle. The set is declared suitable for contact with cosmetic products; neither the bottle nor the sprayer has a food contact certificate.

What it is good for

The 30 ml volume is a typical size for handbag, travel or sample packs.

• Facial tonics and hydrosols – thin water-based solutions are sprayed evenly and finely.
• Refreshing mists – for example a hydrosol with glycerine or light hair sprays.
• Alcohol-based products – eau de parfum and alcohol-based tonics in a small pack.
• Travel size – decanting a larger pack into a smaller one for travel or for trying a product out.

Oil-based and thicker contents do not spray well with this type of sprayer; the nozzle is more likely to release them in a stream. For oils and serums, a bottle with a dropper or pump is more suitable.

Filling and volume

The nominal volume of 30 ml is the volume the bottle is designed for in normal filling. The brimful capacity listed in the parameters is the physical volume up to the neck. The difference between them is a reserve for the sprayer tube, which displaces part of the contents upwards when screwed on, and for the expansion of the contents with changes in temperature. Therefore, fill the bottle to the nominal volume, not to the brim, otherwise the contents will overflow through the neck when you screw on the sprayer.

Good to know

Before the first filling, wash the bottle and the sprayer, disinfect them with isopropyl alcohol or ethanol and leave them to dry completely, so that residual water in the tube does not dilute the first dose.

The sprayer combines plastic (PP) and aluminium. For products with a higher proportion of essential oils or solvents, we recommend testing on a single pack how the plastic parts behave with your specific formulation, especially during longer storage.

The bottle can be reused. After emptying, wash it, rinse the sprayer with clean water and spray it several times to flush any residue of the contents out of the tube and nozzle. When changing to a different type of product, it is better to replace the sprayer with a new one so that fragrances and ingredients do not mix.

Before recycling, separate the sprayer from the bottle. The glass belongs in glass recycling; the sprayer made of plastic and aluminium does not.

Frequently asked questions