GLASS BOTTLES 100 ml
White Glass Bottle, Black Oil Pump, 100 ml
Pack size10 ml15 ml30 ml100 ml
The white glass medicine bottle with a capacity of 100 ml and a fitted treatment pump is a ready-made packaging solution for face, body and massage oils as well as oil serums. full description
Lowest price in the last 30 days: €3.03
Total for 1 pcs: €3.03
Quantities add up across all combinations of this bottle.
Product description
The white glass medicine bottle with a capacity of 100 ml and a fitted treatment pump is a ready-made packaging solution for face, body and massage oils as well as oil serums. The opaque white glass keeps light away from the contents, so oils prone to oxidation and blends with essential oils are better protected than in a clear bottle. The pump with a dip tube draws the oil from the bottom and delivers the same dose with every press, with no spilling and no contact between your hands and the contents.
The set consists of three parts: a glass bottle with an 18/410 neck finish, a black plastic pump and a clear overcap, which protects the pump head from dust and accidental pressing. All three components are declared suitable for contact with cosmetic products, and the declaration of conformity is available with the product. The 100 ml capacity corresponds to a common size for body or massage oil, while for face oils it is rather a larger salon-size pack.
What the set is suitable for
- Massage and body oils – the measured dose per press makes work easier during a massage, when your other hand is busy.
- Face and hair oils – the opaque glass helps oils with a high proportion of unsaturated fatty acids and blends with essential oils keep their quality for longer.
- Oil serums and nail and cuticle oils – the small dose from the pump corresponds to the amount commonly applied to the face or hands.
- Cleansing and make-up removing oils – liquid oils, both non-emulsifying and emulsifying, as long as they keep an oil-like viscosity.
Dispensing and filling
The pump delivers approximately 0.18 ml per press. With a typical face oil this means two to three presses per application, while for a massage the number of presses depends on your needs. The dip tube reaches almost to the bottom, but the very last remainder of the oil cannot be drawn up by the pump. Take this into account when calculating the actually usable quantity.
The nominal capacity of 100 ml is the volume the bottle is designed for in normal filling. The brimful capacity is larger and you will find it in the parameters. The difference provides room for the dip tube and the pump body and for the expansion of the contents when the temperature changes. Fill to the nominal capacity, not to the neck, otherwise the oil will be pushed out when you screw the pump on.
After screwing on the pump, press the head several times to prime it until the dip tube fills and the oil starts to come out. The first doses are often weaker, and only then does the pump dispense evenly.
Good to know
Before the first filling, wash the bottle, disinfect it with isopropyl alcohol or ethanol and leave it to dry completely. Residual water in an oil-based product increases the risk of microbial growth, even though the oil itself contains no water. Rinse the pump with warm water, pump it several times and leave it to dry with the dip tube pointing down.
The pump is designed for liquid oils and products with an oil-like viscosity. Thick balms, butters or creams will not pass through it, and thick oils may be dispensed slowly. For oils with a higher proportion of essential oils or solvents, we recommend testing how the plastic parts behave with your specific formulation, as the compatibility of each plastic is different. Glass itself resists essential oils.
Do not fill the glass medicine bottle with hot contents and do not move it straight from the cold into the warm, as a sudden change of temperature may crack the glass. Filling with oil at room temperature carries no risk. When reusing the bottle, clean the bottle and the pump in the same way as before the first filling. At the end of its life, the glass belongs in glass recycling and the plastic parts are sorted separately.
The set is not approved for contact with food. Do not fill it with edible oils, syrups or herbal infusions, as the packaging is intended for cosmetics.
Separate closures with an 18/410 neck finish and other ready-made bottle and closure combinations are available in the Handymade range. If you combine the pump with a different bottle, check the tightness, the length of the dip tube and the dispensing directly with your product.
Frequently asked questions
Parameters
Glass bottle, vial, white, 100 ml
Black Plastic Oil Pump, 18 mm
Clear Plastic Cap for Oil Pump, 18/410
Product documentation
- DrawingTechnical drawing
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.













































































