GLASS BOTTLES 30 ml
White Glass Bottle, Glossy Gold Black Spray, Smoky Overcap, 30 ml
Pack size10 ml15 ml30 ml100 ml
The 30 ml glass bottle with a fine mist sprayer is designed for filling your own facial toners, hydrosols, hair sprays, perfume waters and refreshing body sprays. full description
Lowest price in the last 30 days: €2.24
Total for 1 pcs: €2.24
Quantities add up across all combinations of this bottle.
Product description
The 30 ml glass bottle with a fine mist sprayer is designed for filling your own facial toners, hydrosols, hair sprays, perfume waters and refreshing body sprays. The white glass is opaque, so it protects the contents from light and is also suitable for blends with essential oils or plant extracts, which lose their scent and colour faster in light. The sprayer in a glossy black and gold finish with a smoky overcap gives the finished product the look customers expect from small perfumes and travel sprays. The set is declared suitable for contact with cosmetics, and the declaration of conformity is provided with the product.
What the set is suitable for
- Facial toners and hydrosols – water-based solutions without thickeners are applied evenly by the sprayer, without your hands touching the contents.
- Perfume waters and body sprays – alcohol-based compositions in a smaller volume, which is used up before the fragrance loses its freshness.
- Hair and refreshing sprays – light liquids for the hair, the scalp or for cooling down on warm days.
- Samples and travel packs – the bottle fits into a handbag and is enough for a customer sample.
How to work with the set
With a single press, the sprayer releases approximately 0.14 ml of the contents, which is a small dose for lightly misting the skin or hair. It works best with low-viscosity liquids: water, hydrosols, alcohol solutions and thin water-based serums. Thick emulsions, gels and pure oils are dispensed poorly through the nozzle, as they stay in the tube or drip instead of spraying. For oil-based or partially oil-based contents, we recommend testing the dispensing on a small batch before you fill the whole run.
The sprayer tube should reach all the way to the bottom of the bottle. Before fitting the sprayer for the first time, check that the tube does not bend when screwed on and that it reaches the bottom, otherwise the last millilitres of the contents cannot be sprayed out.
Fill the bottle up to the nominal volume of 30 ml, not to the brim. The difference between the nominal and the total volume provides a reserve for the sprayer tube and for the expansion of the contents when the temperature changes. An overfilled bottle overflows when the sprayer is screwed on, and the sprayer may not seal properly.
Nominal and total volume are often confused. The nominal volume is the amount the packaging is intended for under normal filling and which is stated on the label. The total brimful volume is the physical volume of the glass up to the neck. With a sprayer, the reserve matters more than with an ordinary cap, because the tube and the mechanism take up part of the space in the neck.
Good to know
Before the first filling, wash the bottle, disinfect it with isopropyl alcohol or ethanol and let it dry completely. The sprayer can be rinsed with clean water and then with ethanol. The mechanism cannot be dismantled, so when you change the contents, we recommend replacing it with a new one so that fragrances and ingredients do not mix.
Glass does not react with alcohol or essential oils, so the contents can be kept in the white bottle for longer. The sprayer is made of polypropylene, plastic and aluminium. It works without problems with common alcohol-based and water-based cosmetic preparations. With high concentrations of essential oils or other solvents, we recommend checking the behaviour of the seal and the nozzle on a test sample.
Glass does not tolerate sudden temperature changes well. Do not pour hot contents into a cold bottle, and do not leave a filled bottle in direct sunlight in a car. White glass protects the contents from light, but not from overheating.
The bottle can be reused after washing, and the sprayer withstands further filling with the same type of contents. Glass belongs in the glass recycling bin, and the sprayer, as a combination of plastic and metal, belongs with plastics or mixed waste according to local rules. You can find closures with the same neck type as stated in the parameters, as well as other ready-made bottle + closure combinations, in the Handymade range. If you make your own combination, we recommend checking the tightness and dispensing with your specific formulation.
Frequently asked questions
Parameters
Glass bottle, vial, white, 30 ml
Product documentation
- PPWRPackaging Declaration (PPWR)
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.

























































































