GLASS BOTTLES 15 ml
White Glass Bottle, Glossy Gold Black Spray, Smoky Overcap, 15 ml
Pack size10 ml15 ml30 ml100 ml
This white glass medicine bottle with a black and gold fine mist sprayer and smoky overcap is a ready-made set for 15 ml of liquid cosmetics applied by spraying. full description
Lowest price in the last 30 days: €1.87
Save €0.04 with this set
Total for 1 pcs: €1.87
Quantities add up across all combinations of this bottle.
Product description
This white glass medicine bottle with a black and gold fine mist sprayer and smoky overcap is a ready-made set for 15 ml of liquid cosmetics applied by spraying. The white opaque glass hides the contents from view and limits the access of light, so it also suits formulations with more sensitive ingredients. The sprayer releases a small dose with each press, which suits facial toners, hydrosols and perfumed waters in a travel or sample size. The glossy black and gold closure with the smoky overcap gives the small bottle a look that also holds up in retail.
Suitable uses
The set is designed for thin, water-based or alcohol-based contents that the sprayer disperses into a fine mist. The most common contents for the 15 ml size are:
- Facial toners and refreshing sprays – low-viscosity water-based formulations applied directly to the skin.
- Hydrosols – on their own or in a blend, as a travel pack or a sample for customers.
- Perfumed waters and body sprays – alcohol-based compositions, where the glass does not react with the contents and does not absorb the scent.
- Hair sprays and fresheners – thin solutions without an oil phase that would clog the nozzle.
- Hand sprays – a small volume for trying out a fragrance or for carrying in a handbag.
The set is declared as suitable for contact with cosmetic products. The declaration of conformity for both the bottle and the sprayer is available with the product.
Volume and filling
Nominal volume is the amount the bottle is designed for under normal filling. The total brimful volume given in the parameters is larger and corresponds to the physical volume up to the neck. The difference is a reserve for the tube and valve of the sprayer and for the expansion of the contents when the temperature changes. The bottle should therefore be filled up to the nominal volume. If it were filled to the brim, part of the contents would be pushed out when the sprayer is screwed on.
The sprayer tube is supplied longer than the height of the bottle requires. Before first use, shorten it so that the end touches the bottom, and cut it at an angle so that the tube does not stick to the glass.
Before the first filling, wash the bottle, disinfect it with isopropyl alcohol or ethanol and let it dry completely. For the sprayer, it is enough to flush it by spraying clean water or ethanol through it several times and then dry it.
Sprayer and dispensing
The sprayer head is made of polypropylene, aluminium and other plastic parts. The exact volume of one dose is given in the parameters.
The sprayer works correctly only with contents of low viscosity. Oils, oil serums and thicker emulsions are not dispersed through the nozzle and the mechanism gradually becomes clogged. Formulations with solid particles, for example an undissolved scrub or herbal residues, are equally unsuitable. Filter the contents before filling.
For alcohol-based perfumes and formulations with a higher proportion of essential oils, we recommend checking how the plastic parts of the sprayer behave with your specific formulation. The glass itself is resistant to these ingredients.
Good to know
- Light protection – white glass limits the access of light to the contents, which helps formulations with hydrosols, vitamins or fragrances that change character more quickly in light. It does not protect against heat, however, so do not leave the bottle in the sun or in a hot car.
- Smoky overcap – the dark, clear overcap protects the nozzle from dust and from accidental pressing in a bag. It is removed completely during application.
- Reuse – the glass withstands repeated washing and disinfection. Replace the sprayer after longer use, especially if it sprays unevenly or the nozzle drips.
- Closures – the sprayer in the set is matched to the neck of the bottle. Other closures with the same neck finish, given in the parameters, and ready-made combinations are available in the Handymade range. With your own combination, check the tightness and the behaviour with your specific formulation.
- Recycling – the glass bottle goes into glass recycling; the sprayer, made of a combination of plastic and aluminium, is unscrewed before recycling and sorted separately.
Frequently asked questions
Parameters
Glass bottle, vial, white, 15 ml
Product documentation
- PPWRPackaging Declaration (PPWR)
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.























































































