+421 950 333 113info@handymade.store−10 %Shop now

GLASS BOTTLES up to 10 ml

White Glass Bottle, Glossy Gold Black Spray, Smoky Overcap, 10 ml

Pack size10 ml15 ml30 ml100 ml

Glass bottle, white, black and gold fine mist sprayer , smoky overcap, 10 ml is a ready-made set for small quantities of perfumes, hair mists and facial mists . full description

AvailabilityPre-order
Product codeO18SB010-OVR18PZCL
€1.65incl. VAT

Lowest price in the last 30 days: €1.65

Save €0.03 with this set

Pre-orderThis variant is currently out of stock — your order will be a pre-order and delivery may take longer.
Volume pricing
1–539 pcs€1.65Your price
540–1079 pcs€1.54−7 % · 1× plato
1080–5399 pcs€1.43−13 % · 2× plato
from 5400 pcs€1.26−24 % · 10× plato

Total for 1 pcs: €1.65

Quantities add up across all combinations of this bottle.

Product description

Glass bottle, white, black and gold fine mist sprayer, smoky overcap, 10 ml is a ready-made set for small quantities of perfumes, hair mists and facial mists. It consists of a white glass medicine bottle with a nominal volume of 10 ml and a plastic sprayer in a glossy black and gold finish with a smoky overcap. The opaque white glass hides the contents and reduces the amount of light reaching them, so it also suits fragrance compositions that change colour over time when exposed to light.

The set is declared as suitable for contact with cosmetics; you will find the declaration of conformity with the product. It is not approved for direct contact with food. Neither the bottle nor the sprayer has a food-contact approval, so the set is intended exclusively for cosmetic products.


What the set is suitable for

  • Perfumes and eau de parfum – the sprayer disperses alcohol-based contents into a fine mist, and the white glass with a black and gold closure works as ready-made gift packaging.
  • Samples and testers – 10 ml lasts for several weeks of use, and the customer can take the sample away without the risk of spillage.
  • Hair and fabric fragrances – light alcohol-based or water-based compositions applied by spraying from a greater distance.
  • Facial and body mists for travel – toners, hydrosols and refreshing mists in a travel size.
  • Travel refills of a favourite fragrance from a large bottle for hand luggage.

How the sprayer dispenses

The sprayer works as a mechanical pump with a tube that reaches the bottom of the bottle. One press releases approximately 0.14 ml, which is a common dose for perfumes and fine mists. The contents are dispersed into the air without dripping. Before first use, prime the sprayer by pressing it several times until the tube fills and an even mist starts to come out. The smoky overcap slides onto the neck of the sprayer and protects the pump from being pressed accidentally in a bag.

The quality of the mist depends on the consistency of the contents. Water-based and alcohol-based contents are sprayed evenly. A mechanical sprayer may not disperse thicker oil blends and products containing a thickener into a mist, and the output is more likely to be a stream or drops. For such contents, we recommend checking the behaviour with your specific formulation before filling a whole batch.

If, after screwing on the sprayer, its tube extends past the bottom of the bottle and rests against it, shorten it with a diagonal cut so that it ends just above the bottom. A diagonal cut stops the end of the tube from sealing against the bottom, which would prevent it from drawing up the contents.


Filling and capacity

The nominal volume is the volume the bottle is designed for under normal filling. The brimful volume is the physical volume up to the neck, and you will find it in the parameters. The difference between the two is a reserve for the tube and the body of the pump, which push part of the contents upwards once screwed on, and for the expansion of the contents when the temperature changes. Fill to the nominal volume, not to the brim. If the bottle is overfilled, the contents overflow through the neck when you screw on the sprayer, and the sprayer then moves in a sticky layer.

The narrow neck of the medicine bottle is filled with a funnel or a syringe without a needle. It is advisable to let alcohol-based blends mature in a closed container before filling and to pour only the finished and, if necessary, filtered product into the bottle.

Screw the sprayer on by hand only, without force. If it is overtightened, the thread on the neck is damaged and the closure stops sealing.


Preparation and reuse

Before first filling, wash the bottle with warm water and washing-up liquid, rinse it thoroughly and disinfect it with isopropyl alcohol or ethanol. Rinse the sprayer by pumping clean water or alcohol through it from a glass several times and then pumping it dry. Both parts must be completely dry before filling. Residual water in the tube would dilute the perfume or could be a source of contamination of water-based contents.

The glass bottle can be reused after washing. With the sprayer, what it contained before is what matters. After a perfume, traces of the fragrance remain in the tube and the pump, and alcohol removes them only partially. For a new fragrance we therefore recommend a new sprayer; for the same fragrance, rinsing is enough.

Glass does not tolerate sudden changes in temperature, so do not pour hot contents into the bottle. Plastic parts of the sprayer are commonly in contact with alcohol-based perfumes. With concentrated essential oils and solvents, it is advisable to check the behaviour over time, for example any change in the stiffness or colour of the plastic.


Good to know

  • Closures – you will find sprayers, caps and ready-made combinations with the same type of neck, as stated in the parameters, in the Handymade range. If you create your own combination, we recommend checking the tightness and the behaviour of the packaging with your specific formulation.
  • Contents not visible – the level cannot be seen through white glass, so the remaining amount is estimated by weight or by the number of doses.
  • Glossy finish – clean the black and gold closure with a soft cloth; abrasive products will scratch the gloss.
  • Recycling – the glass bottle belongs in glass recycling; the sprayer is made of several materials and, once unscrewed, is sorted separately.

Frequently asked questions

Does the white 10 ml glass bottle protect perfume from light?
Yes, white glass is opaque and reduces the amount of light reaching the contents. For perfumes and fragrance compositions that change colour or scent in light, this is an advantage over clear bottles. However, you cannot see the remaining contents through the glass, which you should take into account with samples.
How much perfume fits into a 10 ml bottle with a sprayer?
The bottle is designed for 10 ml of contents, which corresponds to the nominal volume. Physically, more fits up to the brim, but this space is a reserve for the tube and the body of the sprayer. Fill to the nominal volume, otherwise the contents will overflow when you screw on the sprayer.
Is the sprayer on the 10 ml bottle suitable for oil-based perfumes?
A mechanical sprayer generally does not disperse oil-based perfumes into a fine mist. The pump is designed for alcohol-based and water-based contents with low viscosity. With thicker oil-based contents, the output is more likely to be a stream or drops, and pressing is harder. For oil-based compositions, a bottle with a dropper or a roll-on is more suitable.
Can the bottle with the black and gold sprayer be reused?
Yes, after washing and disinfecting with ethanol or isopropyl alcohol, the glass bottle can be filled again. Rinse the sprayer by pumping clean alcohol and water through it, but traces of the previous fragrance in the tube are only partially removed. For a different fragrance, a new sprayer is more suitable; for the same fragrance, rinsing and thorough drying are enough.
Can I fill the 10 ml spray bottle with homemade oil or syrup?
No, the set is not approved for direct contact with food. Neither the bottle nor the sprayer has a food-contact approval, so it is intended exclusively for cosmetic products such as perfumes, hair mists and facial mists. Suitability for contact with cosmetics is documented by the declaration of conformity with the product.

Parameters

Glass bottle, vial, white, 10 ml

Product colour
White
Country of origin
China
Nominal capacity
10
Brimful capacity
13 ml
Diameter
26 mm
Thread type
18/410
Height
58 mm
Product material
Glass

Plastic fine mist sprayer, glossy black and gold, smoked cap, 18/415

Product colour
BlackGold
Country of origin
China
Diameter
23 mm
Thread type
18/415
Height
40 mm
Tube length
115 mm
Dose
0,14 ml

Product documentation

PDSProduct Data Sheet
Glass bottle, vial, white, 10 ml · O18SB010PDF ↓
Plastic fine mist sprayer, glossy black and gold, smoked cap, 18/415 · OVR18PZCLPDF ↓
DrawingTechnical drawing
Glass bottle, vial, white, 10 ml · O18SB010PDF ↓
Plastic fine mist sprayer, glossy black and gold, smoked cap, 18/415 · OVR18PZCLPDF ↓
Download all (ZIP)

4 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.