GLASS BOTTLES 30 ml
Amber Matte Glass Bottle, Lotion Pump, 30 ml
This matte amber glass bottle, with a capacity of 30 ml and a fitted lotion pump , is intended for finished creams, facial serums, eye creams and lighter emulsions that are dispensed in small doses without opening the… full description
Lowest price in the last 30 days: €0.90
Total for 1 pcs: €0.90
Quantities add up across all combinations of this bottle.
Product description
This matte amber glass bottle, with a capacity of 30 ml and a fitted lotion pump, is intended for finished creams, facial serums, eye creams and lighter emulsions that are dispensed in small doses without opening the packaging. Amber glass reduces the amount of light reaching the contents, which helps with formulations containing vegetable oils, vitamins or other light-sensitive ingredients. The matte surface gives the bottle a subdued look without reflections.
The pump with a black head dispenses the contents when pressed, so the customer does not touch the rest of the cream in the bottle when taking a dose. The set is sold as a ready-made pair; the bottle and the pump have the same neck finish and fit together.
What the set is suitable for
- Facial and eye creams – the small volume suits creams that are used in small amounts, and the pump releases approximately the same dose every time.
- Serums and fluids – both water-based and emulsion serums with a thinner consistency pass through the pump smoothly, and the amber glass protects them from light.
- Creams with active ingredients – the contents are not opened during use, so less air and fewer impurities get in than with a jar.
- Samples and test batches – when trying out a new recipe, it is enough to fill a small amount and observe how the formulation behaves in the packaging.
One press of the pump releases approximately 0.12 ml of the contents.
Nominal and total volume
The nominal volume of 30 ml is the amount the bottle is designed for under normal filling. The brimful capacity given in the parameters is the physical volume of the glass up to the neck and is higher. The difference is a reserve for the dip tube and the body of the pump, which take up part of the space in the bottle once fitted, and for possible expansion of the contents when the temperature changes. For this reason, fill only up to the nominal volume. If the bottle were filled to the brim, the contents would be pushed out through the thread when the pump is screwed on.
The dip tube of the pump is supplied longer than the height of this bottle requires. Before fitting it, shorten it with a sharp knife or scissors so that it reaches just above the bottom. A tube that is too long will bend and the pump will then not draw up the contents properly.
Good to know
How the pump works depends on the consistency of the contents. Creams of medium thickness, lotions and serums pass through smoothly. Very thick butters or solid creams may not be drawn up by the pump, or it may release them unevenly. We recommend testing the behaviour of your particular formulation on a small amount before filling the whole batch.
Before the first filling, the bottle and the pump are washed, disinfected with isopropyl alcohol or ethanol and left to dry completely. Residual water in the dip tube or on the walls of the glass would dilute the first doses and could impair the microbiological stability of the contents. After screwing the pump on, press it several times to prime it until it draws up the product and starts dispensing. The first doses are usually smaller until the dip tube and the body of the pump are completely filled.
Glass does not tolerate sudden temperature changes well. A hot emulsion poured into a cold bottle can damage the glass, so let the contents cool at least to room temperature before filling.
The set is declared as suitable for contact with cosmetic products; it is not intended for contact with food.
For formulations with a higher proportion of essential oils or solvents, we recommend checking whether the plastic parts of the pump become brittle or change colour, and whether the contents seep around the thread over time. It is enough to fill one bottle and leave it to stand for several weeks before filling the whole batch.
Once the contents have been used up, the glass and the plastic pump are separated and sorted separately: the glass into glass waste and the pump with plastics.
Frequently asked questions
Parameters
Glass bottle, matte brown, 18 mm, 30 ml
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.




























































































