+421 950 333 113info@handymade.store−10 %Shop now

GLASS BOTTLES 30 ml

Clear Glass Bottle, Black Fine Mist Sprayer, Black Overcap, 30 ml

Pack size10 ml12 ml15 ml30 ml50 ml100 ml

The 30 ml glass bottle with a fine mist sprayer is intended for toners, hydrosols, face and hair mists, perfumed waters and other thin liquids applied as a spray. full description

AvailabilityIn stock · 7 pcs
Product codeO18SP030-OVR18PC3
€0.68incl. VAT

Lowest price in the last 30 days: €0.68

Save €0.03 with this set

Volume pricing
1–999 pcs€0.68Your price
1000–4999 pcs€0.62−8 %
from 5000 pcs€0.56−17 %

Total for 1 pcs: €0.68

Quantities add up across all combinations of this bottle.

Product description

The 30 ml glass bottle with a fine mist sprayer is intended for toners, hydrosols, face and hair mists, perfumed waters and other thin liquids applied as a spray. The clear glass shows the colour of the contents and how much is left. The black fine mist sprayer with a black overcap gives the small pack a uniform look. The set is supplied as a bottle with the sprayer fitted, and both parts are declared as suitable for contact with cosmetics.


What it is good for

  • Facial toners and hydrosols – water-based liquids without thickeners are dispersed by the fine mist sprayer into an even mist that is applied to the skin without touching it with your hands.
  • Hair and body mists – thin solutions with glycerine, aloe or dissolved active ingredients that do not need to be rubbed in.
  • Perfumed and toilet waters – the 30 ml volume lasts several weeks of use and fits into a handbag or travel bag.
  • Samples and test batches – when you are trying out a new formulation, a small volume is used up before it can spoil, and the clear glass lets you see any cloudiness or phase separation.

The fine mist sprayer and what passes through it

One press releases approximately 0.14 ml of liquid. For a toner this corresponds to one or two sprays for the whole face, for perfumed water to a single spot. The fine mist sprayer works with liquids of low viscosity, that is, water-based, alcohol-based and water-glycerine solutions. The mechanism cannot handle thickened serums, emulsions and creamy liquids – the mist turns into a jet or the nozzle becomes blocked. Light oils behave differently depending on the particular oil, so try them with a small amount before filling the whole bottle.

The dip tube of the fine mist sprayer reaches the bottom of the bottle, so almost all of the contents can be sprayed out. Filter any formulation with undissolved particles, glitter or plant residues before filling.

After each use it is worth pressing the fine mist sprayer once into the air, and when you change the contents, rinse it thoroughly with clean water. Dried residues of glycerine or toner salts are the most common reason why it stops spraying.


Nominal and total volume

The bottle is intended to be filled to a nominal volume of 30 ml. The total volume to the brim, given in the parameters, is the physical volume of the bottle up to the neck and is slightly larger. The difference is a reserve for the dip tube of the fine mist sprayer, which pushes part of the liquid upwards once it is fitted. You should therefore fill the bottle to the nominal volume and never to the brim, otherwise part of the contents will spill when you screw on the fine mist sprayer.


Good to know

Clear glass does not protect the contents from light. Store light-sensitive formulations, for example liquids with essential oils, vitamin C or some plant extracts, away from direct sunlight, or choose amber glass for them.

Before the first filling, wash the bottle, disinfect it with isopropyl alcohol or ethanol and leave it to dry completely. Follow the same procedure for the fine mist sprayer: rinse it with alcohol and press it several times so that the disinfectant also reaches the dip tube and nozzle. The glass withstands repeated use without any change in its properties. Do not pour hot liquid into a cooled bottle and do not expose it to sudden changes in temperature. Hydrosols and toners are filled only after they have cooled down.

The fine mist sprayer is made of polypropylene (PP). For alcohol sprays and formulations with a higher proportion of essential oils, check how the mechanism behaves with your particular formulation, especially its tightness and the smoothness of spraying after several weeks of use.

The set is intended for cosmetics. Neither the bottle nor the fine mist sprayer is declared for contact with food, so the set should not be used for homemade syrups or herbal infusions.

The fine mist sprayer is not intended for liquids with coarser particles or for thick products. If the mist turns into a jet after a few presses, the formulation is too viscous for this type of closure.

You will find other closures with the same neck type as stated in the parameters, and ready-made combinations of the bottle with a different closure, in the Handymade range. If you make your own combination, we recommend checking the tightness, dispensing and behaviour of the packaging with your particular formulation. Put the empty bottle into glass waste; unscrew the fine mist sprayer before disposal and sort it as plastic.


Frequently asked questions

Does the clear glass bottle with a fine mist sprayer protect the contents from light?
No, clear glass lets light through and does not protect the contents from it. The bottle is suitable for toners, hydrosols and waters that are stored in the shade or used up within a few weeks. For formulations with light-sensitive ingredients, such as vitamin C or essential oils, amber glass or storage in a cupboard is safer.
What liquids can be sprayed from the 30 ml glass bottle with a fine mist sprayer?
The fine mist sprayer handles thin liquids: water, hydrosols, toners, alcohol solutions and perfumed waters. One press releases approximately 0.14 ml. Thick serums, emulsions and milks either do not pass through the nozzle or block it. Light oils behave differently, so try them with a small amount before filling the whole bottle.
How much liquid fits into the bottle with a fine mist sprayer?
The bottle is filled to a nominal volume of 30 ml. The physical volume to the brim is larger and is given in the parameters, but this difference serves as a reserve for the dip tube of the fine mist sprayer. If you fill the bottle to the neck, part of the liquid will be pushed out when you screw on the fine mist sprayer.
Can the glass bottle with a fine mist sprayer be reused?
Yes, the glass bottle can be reused after washing and disinfecting it with isopropyl alcohol or ethanol. Rinse the fine mist sprayer with clean water, then with alcohol, and press it several times without liquid to clean the dip tube and nozzle as well. When you change the contents to a different fragrance or formulation, thorough rinsing is necessary, otherwise the residues would mix.
Is the fine mist sprayer suitable for alcohol sprays and toners with essential oils?
The fine mist sprayer is made of polypropylene, but check its behaviour with your particular formulation. With a higher proportion of essential oils, watch in particular the tightness of the closure and the smoothness of spraying after several weeks. The glass itself is not affected by alcohol or essential oils.
Is the glass bottle with a fine mist sprayer suitable for food?
No, this set is not declared for contact with food. Both the bottle and the fine mist sprayer carry a declaration of suitability for cosmetic products only, that is, for toners, mists, perfumed waters and similar preparations. For homemade oils, syrups or infusions, choose packaging with a food-contact certificate.

Parameters

Glass bottle, clear, 18 mm, 30 ml

Product colour
Clear
Country of origin
India
Nominal capacity
30
Brimful capacity
35 ml
Diameter
33 mm
Thread type
18/410
Height
78,8 mm
Product material
Glass

Plastic fine mist sprayer, 18/415, black top, 115 mm

Product colour
Black
Country of origin
China
Diameter
22,3 mm
Thread type
18/415
Height
40 mm
Product material
PPPlastic
Tube length
115 mm
Dose
0,14 ml

Product documentation

PPWRPackaging Declaration (PPWR)
Glass bottle, clear, 18 mm, 30 ml · O18SP030PDF ↓
PDSProduct Data Sheet
Glass bottle, clear, 18 mm, 30 ml · O18SP030PDF ↓
Plastic fine mist sprayer, 18/415, black top, 115 mm · OVR18PC3PDF ↓
DrawingTechnical drawing
Glass bottle, clear, 18 mm, 30 ml · O18SP030PDF ↓
Plastic fine mist sprayer, 18/415, black top, 115 mm · OVR18PC3PDF ↓
Download all (ZIP)

5 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.