GLASS BOTTLES 15 ml
Clear Glass Bottle, Round, Black Fine Mist Sprayer, Black Overcap, 12 ml
Pack size10 ml12 ml15 ml30 ml50 ml100 ml
A glass medicine bottle with a black fine mist sprayer and a volume of 12 ml is suitable for perfume samples , travel-size face mists or toners, or for trying out a new formulation in a small quantity. full description
Lowest price in the last 30 days: €0.77
Total for 1 pcs: €0.77
Quantities add up across all combinations of this bottle.
Add 99 more pcs and the price drops to €0.74/pc.
Product description
A glass medicine bottle with a black fine mist sprayer and a volume of 12 ml is suitable for perfume samples, travel-size face mists or toners, or for trying out a new formulation in a small quantity. The clear glass shows the colour and clarity of the contents, so you can see at a glance whether the solution has turned cloudy or whether the fragrance composition has dissolved well. The sprayer, with a top in the same black colour, gives the set a uniform look, and the contents last for dozens of doses.
The set consists of a bottle and a sprayer with a matching 18/415 neck finish. Both parts are declared as suitable for contact with cosmetics. The set does not have a food-contact certificate; it is intended for cosmetics.
What it is suitable for
- Samples of perfumes and fragranced waters – alcohol-based compositions are dispensed evenly by the sprayer, and the clear glass shows how much of the sample is left.
- Face mists and toners for travel – aqueous solutions with hydrosols, glycerine or water-soluble active ingredients spray well from a small volume.
- Testing formulations – when fine-tuning a new fragrance or spray, it is enough to mix a small quantity and check how it behaves in real packaging.
How the set is filled and how it dispenses
With each press, the sprayer draws the contents up through the tube and releases them as a fine mist. One dose is approximately 0.14 ml, which is a usual amount for perfume samples and face mists. An even mist is produced with thin aqueous or alcohol-based contents. Thick solutions, gels and pure oils are not dispersed by the sprayer; they are more likely to squirt out in a jet or clog it.
The bottle is filled up to the nominal volume, that is, up to 12 ml. The brimful capacity given in the parameters is the physical volume up to the neck. The difference between the two is a reserve for the tube and the sprayer mechanism. If the bottle were filled to the brim, the contents would be pushed out through the thread once the sprayer is screwed on, and the set would leak.
The sprayer tube is longer than the bottle. Before the first assembly, shorten it with a diagonal cut so that the end rests on the bottom and draws up even the last millilitres of the contents.
Good to know
Before the first filling, wash and rinse the bottle and disinfect it with isopropyl alcohol or ethanol, then let it dry completely. Rinse the sprayer by pressing it several times in clean water and then in alcohol. Residual water in the tube would dilute the first doses of the contents.
Clear glass does not protect the contents from light. It is therefore suitable for contents that are used up within weeks or that are stored in the dark, away from sunlight and heat sources.
The sprayer is made of polypropylene. For formulations with a high proportion of essential oils or solvents, we recommend checking the tightness and smooth dispensing in your specific formulation beforehand.
The set is declared for contact with cosmetics. It is not intended for food, syrups or other food liquids.
After thorough washing and disinfection, the bottle can be reused. If you change the fragranced contents, we recommend fitting a new sprayer. You will find other closures with an 18/415 neck finish, as well as ready-made combinations of bottles and closures, in the Handymade range. If you combine parts yourself, check the tightness and dispensing with your specific formulation. For recycling, unscrew the sprayer and sort the plastic separately from the glass.
Frequently asked questions
Parameters
Glass bottle, vial, clear, round, 12 ml
Plastic fine mist sprayer, 18/415, black top, 115 mm
Product documentation
- DrawingTechnical drawing
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.
















































































