GLASS BOTTLES 50 ml
Clear Glass Bottle, Black Lotion Pump with Black Overcap, 50 ml
Pack size10 ml12 ml15 ml30 ml50 ml100 ml
The clear glass bottle with lotion pump, 50 ml, is a set for filling face creams, lighter emulsions and milks that are drawn out by pressing the pump, without reaching into the packaging with your fingers. full description
Lowest price in the last 30 days: €0.86
Total for 1 pcs: €0.86
Quantities add up across all combinations of this bottle.
Product description
The clear glass bottle with lotion pump, 50 ml, is a set for filling face creams, lighter emulsions and milks that are drawn out by pressing the pump, without reaching into the packaging with your fingers. The clear glass shows the colour and texture of the filling, withstands repeated washing and can be refilled. The black pump top complements the clarity of the bottle, so the set suits your own cosmetics as well as small batches intended for sale or as a gift.
The set is declared as suitable for contact with cosmetics. Only the glass bottle has a certificate for direct food contact, the pump does not, so the set as a whole is intended for cosmetic products.
What the set is suitable for
- Day and night face creams – the 50 ml volume corresponds to a standard pack of face cream, and one press of the pump dispenses a small amount that is enough for the face.
- Light emulsions, milks and liquid creams – the dip tube draws the filling from the bottom. The better the contents flow, the more easily they are pumped and the less is left in the packaging.
- Cream serums and gel textures – the pump measures out the filling more precisely than scooping from a jar, which you will appreciate with more expensive active ingredients.
- Hand creams and smaller travel packs – the bottle is small, the pump closes it and the contents do not spill when carried.
How the pump works
The pump is screwed onto the neck of the bottle and the dip tube runs to its bottom. Each press dispenses roughly the same small dose, so it is easy to estimate how many uses the filling will last. The consistency of the filling is decisive. Liquid and medium-thick emulsions pass through the mechanism without problems, but the pump will not draw up thick butters and solid creams. With a thicker formulation, we recommend filling a trial amount and checking the dispensing before you fill the whole batch.
The dip tube of the pump is longer than the height of the bottle. Before the first assembly, shorten it with a diagonal cut so that it ends just above the bottom. The pump will then draw up the filling almost without residue.
Nominal and total volume
The nominal volume is the volume the bottle is intended for under normal filling. The total brim-full volume is the physical volume up to the neck, and you will find it in the parameters. The difference between them is a reserve for the pump, its dip tube and for the expansion of the contents when the temperature changes.
Fill the bottle only up to the nominal volume, not to the brim. If it is filled to the brim, the dip tube of the pump will push part of the contents out of the neck after screwing on.
Preparation before filling and reuse
Before the first filling, wash the bottle, disinfect it with isopropyl alcohol or ethanol and let it dry completely. Rinse the pump with clean water, pump it empty several times and let it dry as well. Do not pour a hot emulsion into the glass; let it cool first. A sudden change of temperature can damage the glass.
For reuse, empty out any residue, then wash and disinfect the bottle in the same way as for the first filling. Some of the filling remains in the tube and mechanism of the pump, so rinse it with warm water and pump it until clean water comes out. If the filling contains a higher proportion of essential oils or alcohol, we recommend checking the behaviour of the plastic pump on a trial amount.
Good to know
- Light – clear glass does not protect the contents from light. Store formulations with unsaturated oils, vitamins or essential oils away from direct light, or choose dark glass for them.
- Preservation – the pump limits contact of the filling with fingers, but it does not replace a preservative. Creams and emulsions with a water phase must be preserved in the same way as in any other packaging.
- Another closure – you will find closures with the same neck type and ready-made combinations in the Handymade range. If you make your own combination, we recommend checking the tightness, the dispensing and the behaviour of the packaging with your specific formulation.
- Recycling – after emptying, unscrew the pump. The bottle goes into glass and the pump into plastics.
Frequently asked questions
Parameters
Clear glass bottle, 18 mm, 50 ml
- Product colour
- Clear
- Country of origin
- European Union
- Nominal capacity
- 50
- Brimful capacity
- 61 ml
- Diameter
- 39 mm
- Thread type
- 18/410
- Height
- 92,9 mm
- Product material
- Glass
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.




















































































