GLASS BOTTLES 15 ml
Clear Glass Bottle, Round, Black Lotion Pump with Black Overcap, 12 ml
Pack size10 ml12 ml15 ml30 ml50 ml100 ml
Small clear glass medicine bottle with a volume of 12 ml , supplied with a lotion pump with a black top. full description
Lowest price in the last 30 days: €0.79
Save €0.04 with this set
Total for 1 pcs: €0.79
Quantities add up across all combinations of this bottle.
Product description
Small clear glass medicine bottle with a volume of 12 ml, supplied with a lotion pump with a black top. The set is designed for small packs of creams, serums and light emulsions where the product is dispensed in small amounts: eye creams, concentrated serums, samples and travel packs, or testers of a new formulation. The clear glass shows the contents, so you can see the colour and how much product is left in the bottle at a glance.
Both the bottle and the pump are declared suitable for contact with cosmetics. The set as a whole is intended for cosmetic products.
What it is suitable for
- Eye creams and décolleté creams – small doses and closed packaging, so the product is not scooped out with the fingers.
- Serums and light emulsions – the pump dispenses them evenly, without dripping down the neck.
- Samples and travel packs – with small doses, 12 ml lasts for dozens of uses.
- Testers and trial batches – when fine-tuning a formulation, you can see how the product behaves in packaging with a pump.
Dispensing and filling
The pump works with a dip tube that draws the contents from the bottom. One press releases a small dose, approximately 0.14 ml, so the set is suitable for products that are applied in small amounts. The product must be fluid enough to pass through the tube and the valve. Light to medium-thick creams, emulsions, serums and gels usually pass without problems, whereas solid butters and very thick creams cannot be pushed through the pump. The exact viscosity limit cannot be determined in general, so we recommend filling one bottle as a trial and checking whether the pump delivers the contents smoothly after several presses.
The tube is longer than the height of the bottle requires. Before assembling it for the first time, shorten it with an angled cut so that it ends just above the bottom.
When filling, follow the nominal volume. The nominal volume is the amount the packaging is designed for under normal filling. The brimful volume given in the parameters is the physical volume of the glass up to the neck. The difference between them is a reserve for the tube and the inner part of the pump and for the expansion of the contents when the temperature changes. A bottle filled to the brim would overflow when the pump is screwed on.
Clear glass does not protect the contents from light. Light-sensitive formulations, for example those with a higher proportion of unsaturated oils or with active ingredients that lose their effect in light, are better placed in dark glass or in a closed cabinet away from daylight.
Good to know
Before the first filling, wash the bottle, disinfect it with isopropyl alcohol or ethanol and let it dry completely. It is enough to rinse the pump with clean water or alcohol and let it dry with the tube pointing down. Otherwise, water trapped in the valve would end up in the first dose.
Do not pour a hot emulsion into the glass. Let the product cool to room temperature and only then fill it, as a sudden temperature difference puts stress on the glass.
The pump is made of polypropylene (PP). It works without problems with common cosmetic emulsions and oils. For formulations with a high proportion of essential oils or solvents, it is worth checking whether the material of the valve and the tube softens after longer contact.
After thorough washing and disinfection, the bottle can be filled again. The pump can be reused only if it can be rinsed without residues of the original contents. You can find ready-made combinations of a bottle and a closure with the same neck finish as stated in the parameters in the Handymade range. If you make your own combination, we recommend checking the tightness, the dispensing and the behaviour of the packaging with your specific formulation. Glass belongs in glass recycling, the pump in plastics recycling.
Frequently asked questions
Parameters
Glass bottle, vial, clear, round, 12 ml
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.
















































































