GLASS BOTTLES 50 ml
Clear Glass Bottle, Glossy Gold White Spray, 50 ml
Pack size10 ml12 ml15 ml30 ml50 ml100 ml
This 50 ml clear glass bottle with a white and gold fine mist sprayer is designed for thin, water-based cosmetic products that are applied as a spray: hydrosols , facial toners, refreshing face and body mists, light… full description
Lowest price in the last 30 days: €1.14
Total for 1 pcs: €1.14
Quantities add up across all combinations of this bottle.
Product description
This 50 ml clear glass bottle with a white and gold fine mist sprayer is designed for thin, water-based cosmetic products that are applied as a spray: hydrosols, facial toners, refreshing face and body mists, light hair sprays and scented waters. The clear glass lets you see the colour of the contents and how much product is left. The fine mist sprayer with a white head and a glossy gold collar is supplied as a ready-made closure, so you only need to fill the set and it is ready to use. The whole set is declared suitable for contact with cosmetic products.
The smaller volume is suited to travel, handbags, samples or smaller batches, where the product is used up before it loses its fragrance or effectiveness. The bottle is of European origin and made of glass, and the sprayer is made of polypropylene with an aluminium collar that gives the closure a metallic shine.
What the set is suitable for
- Hydrosols and facial toners – a sprayer applies water-based products evenly and without hands touching the contents, which is valued in formulations without a preservative or with a low usage rate.
- Face and body mists – refreshing and hydrating mists with glycerine, aloe or water-soluble active ingredients.
- Hair sprays – light water-based sprays for smoothing, refreshing or scenting hair. With a higher alcohol content, we recommend checking how the sprayer behaves with your finished formulation.
- Scented waters and fragrance samples – the clear bottle with a glossy closure also works as a gift or presentation pack.
- Textile and room sprays – water-based sprays with solubilised fragrance components, if the formulation is thin and free of sediment.
Nominal and total volume
The nominal volume is the amount the packaging is designed for under normal filling. The total brimful volume is the physical volume up to the neck, and you can find it in the product parameters. The difference between the two values leaves room for the sprayer tube and for the contents to expand when the temperature changes. Fill the bottle up to the nominal volume, not to the brim. If it is overfilled, the contents are pushed out when the sprayer is screwed on, and the closure may not seal properly.
One press of the sprayer releases approximately 0.14 ml of product. You can use this value to estimate consumption or to write the instructions for use of the finished product.
Good to know
Before the first filling, wash the bottle, disinfect it with isopropyl alcohol or ethanol and leave it to dry completely. It is enough to rinse the sprayer tube with the disinfectant solution and let it drain. Protect the glass from sudden temperature changes.
Clear glass does not protect the contents from light. Store formulations with essential oils, vitamins or plant extracts away from direct sunlight, or choose amber or blue glass for them. For ordinary hydrosols, toners and mists used up within a few weeks, clear glass is sufficient.
The sprayer is designed for thin liquids. Thicker serums, emulsions or oils generally will not spray into a fine mist and may clog the nozzle. Filter formulations with sediment or undissolved particles before filling, otherwise the tube may become blocked. When using it for the first time, press the head several times until the tube fills.
Only the glass bottle on its own has a certificate for direct contact with food. The sprayer does not have one, so the set as a whole is intended for cosmetics.
Reuse is possible: both the bottle and the sprayer can be refilled after thorough washing and disinfection. If you change the product, expect residues of fragrance in the tube and the nozzle. Once the closure is separated, the glass bottle is recycled as glass, and the polypropylene sprayer with the aluminium collar is disposed of separately as plastic.
If you want to combine the bottle with a different closure, you can find closures with the same neck finish and ready-made sets in the Handymade range. For your own combination, we recommend checking the seal, the dispensing and the behaviour of the packaging with your specific formulation.
Frequently asked questions
Parameters
Clear glass bottle, 18 mm, 50 ml
- Product colour
- Clear
- Country of origin
- European Union
- Nominal capacity
- 50
- Brimful capacity
- 61 ml
- Diameter
- 39 mm
- Thread type
- 18/410
- Height
- 92,9 mm
- Product material
- Glass
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.




















































































