Yes, this packaging can be used repeatedly if basic hygiene principles are observed. Before each new filling, it is necessary to thoroughly clean the bottle and the dispenser and to disinfect them. For disinfection we recommend using, for example, isopropyl alcohol or ethanol – you can find them in our range as IPA 99 % isopropyl alcohol and Ethanol 96 % denatured plant-based. Only after using them and after the complete drying of the inner surfaces of the packaging is it appropriate to proceed to refilling.

The bottle with cream dispenser is ideal for thicker and semi-liquid cosmetic formulations where controlled application is important – for example facial creams, serums, local treatments, gels for acne-prone skin, treatment products for hands or special products for sensitive areas. Thanks to the dispenser, it is also suitable for more concentrated preparations where you want to limit excessive dosing of the product.

Before filling, make sure that the packaging is clean and disinfected if necessary. Fill the product gradually so that you minimize the formation of air bubbles which can affect the initial priming of the dispenser. After filling the bottle, place the dispenser on, tighten it firmly and pump several times until the system is filled. For very thick creams, a smaller test filling may be necessary to verify whether the viscosity corresponds to the capabilities of the dispensing mechanism used.

On Handymade.sk you will find, in the packaging categories, an extended filter that helps you quickly choose a suitable bottle or jar. After clicking on the relevant category, the filter is located at the top of the page and allows filtering according to parameters such as neck, size, colour and material. Thanks to this, you can easily adapt the choice of packaging to the specific product, the aesthetics of your brand and the requirements for dosing functionality.

If you decide not to reuse the packaging, we recommend as a first step to empty it as much as possible and remove any product residues. The further recycling procedure depends on the specific material given in the parameter table for this product on Handymade.sk – according to this, assign it to the appropriate type of sorted waste. By following these recommendations, you will contribute to the correct processing of used packaging and to reducing the amount of mixed waste.

Before using the packaging for the final product, we recommend carrying out a smaller trial filling. Observe the behaviour of the material in contact with the formulation (especially for products containing oils, acids or alcohol), the sealing of the dispenser, the consistency of the doses and the comfort of use. Also verify longer-term storage – for example by a test lasting several weeks at normal room temperature and during transport. With such a procedure you will verify that the selected combination of packaging and product is stable, functional and suitable also for your customers.