+421 950 333 113info@handymade.storeHandymade Days: −10 % on all ready-made productsShop now

PLASTIC BOTTLES

Amber Plastic Bottle, Gold Black Spray, Smoky Overcap, 50 ml

Pack size10 ml30 ml50 ml100 ml115 ml

This plastic medicine bottle with fine mist sprayer is designed for products that are applied to the skin or hair as a mist: toners, facial lotions, hydrosols, hair sprays and body mists. full description

AvailabilityIn stock · 88 pcs
Product codeO18PH050-OVR18PZCL
€1.04incl. VAT

Lowest price in the last 30 days: €1.04

Volume pricing
1–199 pcs€1.04Your price
200–999 pcs€0.96−8 %
1000–4999 pcs€0.89−15 %
from 5000 pcs€0.79−24 %

Total for 1 pcs: €1.04

Quantities add up across all combinations of this bottle.

Product description

This plastic medicine bottle with fine mist sprayer is designed for products that are applied to the skin or hair as a mist: toners, facial lotions, hydrosols, hair sprays and body mists. The 50 ml volume is enough for ordinary home use and fits in a handbag as well as in a cosmetic bag.

Amber PET reduces the light that reaches the contents and is lightweight, so the bottle can also be taken on trips or in a gym bag.

The black and gold glossy sprayer has a smoky overcap that protects the head from dust and from accidental pressing in a bag. The set is declared suitable for contact with cosmetic products.


What it is good for

  • Toners and facial lotions – sprayed directly onto the skin or onto a make-up remover pad.
  • Hydrosols – fingers do not touch the contents when spraying.
  • Hair sprays and mists – the contents are applied in small doses to the lengths of the hair or to the roots.
  • Body and refreshing mists – the lightweight bottle can be carried with you throughout the day.

Thick gels, emulsions and oils are harder to spray as a mist than thin water-based liquids.


Sprayer dispensing

One press dispenses approximately 0.14 ml. The small dose allows you to apply the product gradually and add more as needed. When using the bottle for the first time, press the head several times to prime the sprayer until the dip tube fills and it starts to dispense evenly.

Before filling a whole batch, test the spraying with the finished formulation. After a few days, check that the head dispenses the same amount and that the nozzle does not clog.


Nominal and total volume

The 50 ml figure is the nominal volume, that is, the amount the bottle is designed for in normal filling. The total brimful volume is slightly larger. Fill up to the nominal volume. The space below the neck stays free, as it is taken up by the tube and the sprayer mechanism.


Good to know

Before the first filling and before each reuse, wash the bottle and sprayer, disinfect them with isopropyl alcohol or ethanol and leave them to dry completely. Water-based products need preservation regardless of the packaging.

Protect PET from heat. Fill with contents that have cooled down and do not sterilise the bottle by boiling. The bottle is not intended for aggressive chemicals or solvents; it is meant for finished, diluted products.

The amber PET bottle on its own has a food-contact certificate. The sprayer does not have one, so the set as a whole is intended for cosmetics.

Closures with the same neck finish (given in the parameters) and other ready-made combinations are available in the Handymade range. For a custom combination, as well as for alcohol-based and strongly fragranced contents, we recommend checking the seal, dispensing and behaviour of the packaging with your specific formulation.

At the end of its life, the PET bottle goes in plastic recycling. The sprayer is made of plastic and aluminium, so it should be separated from the bottle.


Frequently asked questions

Does the amber PET bottle protect the contents from light?
Yes, the amber colour of the PET bottle reduces the light that would otherwise reach the contents. This is useful for products with plant extracts, hydrosols or fragrance components. However, amber plastic does not replace complete darkness. For this reason, we recommend keeping the filled bottle out of direct sunlight, for example in a cabinet or in a cosmetic bag.
How many doses does the sprayer dispense from a 50 ml bottle?
From a 50 ml bottle, the sprayer dispenses approximately 350 doses, since one press corresponds to about 0.14 ml. The actual number depends on the product and on whether the head is always pressed all the way down. For a toner applied morning and evening with three presses, a full bottle lasts roughly two months.
Can I fill the sprayer bottle with oil or a thicker product?
With oils and thicker products, the result depends on viscosity; it is mainly thin water-based liquids that spray as a mist. Thicker contents may come out of the nozzle as a stream or clog it over time. For this reason, we recommend testing the spraying with a small amount before filling a whole batch.
Is the plastic bottle with sprayer suitable for food?
No, the bottle and sprayer set is not approved for contact with food and is intended for cosmetics. The certificate for direct food contact applies to the amber PET bottle on its own; the sprayer does not have one. For food, therefore, only the bottle itself is suitable, in combination with a closure that also has a food-contact certificate.
How do I clean the PET bottle and sprayer before filling?
Wash the bottle with warm water and washing-up liquid, rinse it, disinfect it with isopropyl alcohol or ethanol and leave it to dry completely. The sprayer is cleaned by spraying through it: first with warm water, then with the disinfectant, until all residue has left the tube and nozzle. Do not use boiling water or sterilisation by boiling, as PET must be protected from heat.

Parameters

Plastic medicine bottle, amber, 50 ml

Product colour
Brown
Country of origin
European Union
Nominal capacity
50
Diameter
34 mm
Thread type
G18x3
Height
84 mm
Product material
PETPlastic

Plastic fine mist sprayer, glossy black and gold, smoked cap, 18/415

Product colour
BlackGold
Country of origin
China
Diameter
23 mm
Thread type
18/415
Height
40,81 mm
Tube length
115 mm
Dose
0,14 ml

Product documentation

PPWRPackaging Declaration (PPWR)
Plastic medicine bottle, amber, 50 ml · O18PH050PDF ↓
PDSProduct Data Sheet
Plastic medicine bottle, amber, 50 ml · O18PH050PDF ↓
Plastic fine mist sprayer, glossy black and gold, smoked cap, 18/415 · OVR18PZCLPDF ↓
DrawingTechnical drawing
Plastic medicine bottle, amber, 50 ml · O18PH050PDF ↓
Plastic fine mist sprayer, glossy black and gold, smoked cap, 18/415 · OVR18PZCLPDF ↓
Download all (ZIP)

5 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.