Spend over €100 for discounted shipping!

+421 950 333 113[email protected]

PLASTIC BOTTLES

Amber Plastic Bottle, White Spray, 50 ml

Pack size10 ml30 ml50 ml100 ml115 ml

The set of an amber plastic medicine bottle 50 ml with a white fine mist sprayer is intended for cosmetics applied by spraying: facial toners, hydrosols, alcohol-based hand sprays, refreshing hair sprays or samples of… full description

AvailabilityIn stock · 8578 pcs
Product codeO18PH050-OVR18PB
€0.69incl. VAT

Lowest price in the last 30 days: €0.69

Volume pricing
1–99 pcs€0.69Your price
100–999 pcs€0.66−5 %
1000–4999 pcs€0.61−12 %
from 5000 pcs€0.55−21 %

Total for 1 pcs: €0.69

Quantities add up across all combinations of this bottle.

Add 99 more pcs and the price drops to €0.66/pc.

Product description

The set of an amber plastic medicine bottle 50 ml with a white fine mist sprayer is intended for cosmetics applied by spraying: facial toners, hydrosols, alcohol-based hand sprays, refreshing hair sprays or samples of lower-viscosity eau de parfum. Amber PET reduces the amount of light that passes through, so light-sensitive contents are better protected than in a clear container. The bottle is lightweight and shatter-resistant, and at 50 ml it fits in a handbag, suits travel and works as a travel-size pack for customers.

The sprayer in the set is matched to the bottle neck. After filling, you only need to screw it on and the packaging is ready to use. The contents are dispensed without pouring and without fingers touching the product, which helps especially with water-based products, where clean handling matters.


How the sprayer dispenses

Pressing the head draws the liquid up through the tube and releases it as fine droplets. One press delivers approximately 0.13 ml. The contents are distributed evenly without dripping, and consumption is economical.

The mechanism works with thin water-based and alcohol-based liquids. Thicker products, oil sprays or gel toners with a higher proportion of thickener will either not be drawn up by the sprayer or will be released as a jet instead of a mist. If your formulation contains a solubilised essential oil or a fragrance composition, we recommend testing how the sprayer behaves on a small sample.

The sprayer is not intended for pure oils or for emulsions with a creamy consistency. With such products the head clogs and the dose is irregular.


Filling and volume

The nominal volume is the volume the bottle is designed for under normal filling. The brimful capacity is the physical volume up to the neck and is slightly larger. The difference leaves room for the sprayer tube, which dips into the contents once the sprayer is screwed on, and for the expansion of the contents when the temperature changes. Fill therefore only up to the nominal volume of 50 ml and leave the rim free. An overfilled bottle overflows when the sprayer is fitted.

PET is not suitable for filling with hot contents. Let toners and sprays cool to room temperature before filling so that the bottle wall does not deform.

Before the first filling, wash the bottle and the sprayer, disinfect them with isopropyl alcohol or ethanol and leave them to dry completely. Residual water in the tube would dilute the first dose and could shorten the stability of a water-based product.


Good to know

  • Contact with cosmetics – both the bottle and the sprayer are declared suitable for use with cosmetic products. The declaration of conformity is provided with the product.
  • Food use – only the amber medicine bottle 50 ml on its own has a certificate for direct food contact. The sprayer does not have one, so the set as a whole is intended for cosmetics.
  • Essential oils and solvents – with a higher proportion of essential oils, fragrance compositions or other solvents, we recommend checking that the material does not change in appearance and that the sprayer seal holds.
  • Reuse – the set can be used again after washing and disinfection. Rinse the sprayer by pressing it several times in clean water and then several times empty, so that any residue of the previous contents is removed from the tube and the head.
  • Other closures – the bottle fits closures with the same neck finish as stated in the parameters. Ready-made combinations are available in the Handymade range. If you make your own combination, check the tightness, the dispensing and the behaviour of the packaging with your specific formulation.
  • Recycling – the bottle is made of PET and the sprayer of PP. Separate them before disposal.

Frequently asked questions

Is the amber plastic medicine bottle 50 ml with a sprayer suitable for a hydrosol or a facial toner?
Yes, hydrosols and toners are among the most suitable products for this set. They are thin, the sprayer dispenses them in an even mist and amber PET protects light-sensitive extracts. Water-based products without a preservative have a short shelf life, so we recommend filling only the amount that will be used within a short time and disinfecting the bottle before each filling.
Can this set with a sprayer be used for an oil spray?
No, the sprayer in this set is not intended for oils. The mechanism is designed for water-based and alcohol-based liquids with low viscosity. Oil passes through the tube with difficulty, and the head releases it as a jet or becomes clogged. For oil serums and body oils, a medicine bottle with a dropper or a pump is more suitable.
Does the amber PET bottle protect the contents from light?
Yes, the amber colour reduces the amount of light that passes through and slows the changes that light causes in sensitive contents, for example in toners with plant extracts, vitamins or essential oils. The protection is not complete, so store the filled set away from direct sunlight.
Is the bottle and sprayer set suitable for food?
No, the set as a whole is not approved for contact with food. Only the amber plastic medicine bottle 50 ml on its own has a certificate for direct food contact, and the sprayer does not have such a declaration. The whole set is therefore declared for cosmetic use only. For food purposes, the bottle alone could be used with a different closure that has a food contact certificate.
How do I clean the set before reuse?
Wash the bottle with warm water and washing-up liquid, rinse it, disinfect it with isopropyl alcohol or ethanol and leave it to dry upside down. Press the sprayer several times in clean water, then take it out of the water and keep pressing it empty until the last residue leaves the tube. Hot water is not suitable, as PET may deform at higher temperatures.

Parameters

Plastic bottle, dropper bottle, brown, 50 ml

Product color
Amber
Country of origin
European Union
Nominal capacity
50
Diameter
34 mm
Thread type
G18x3
Height
84 mm
Product material
PETPlastic

Fine Mist Sprayer, White, 18/415

Product color
WhiteTransparent
Country of origin
China
Diameter
22,3 mm
Thread type
18/415
Height
42 mm
Product material
PPPlastic
Tube length
115 mm
Dose
0.13 ml
REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.