GLASS BOTTLES 30 ml
Clear Frosted Glass Bottle, Silver Aluminium Cap, 30 ml
The 30 ml glass bottle with an aluminium cap is designed for filling small volumes of cosmetics where the contents should be partly protected from light while remaining visible. full description
Lowest price in the last 30 days: €0.58
Save €0.04 with this set
Total for 1 pcs: €0.58
Quantities add up across all combinations of this bottle.
Product description
The 30 ml glass bottle with an aluminium cap is designed for filling small volumes of cosmetics where the contents should be partly protected from light while remaining visible. The frosted glass diffuses light, and the liquid inside can be seen as a silhouette, so it is clear how much product is left. The silver aluminium cap with an 18/410 neck finish closes the bottle without a dispensing element, which makes the set particularly suitable for storing, selling and transporting the finished product.
The volume suits facial serums, face and body oils, nail and cuticle oils, tinctures and test batches when fine-tuning a recipe. Both the bottle and the cap are declared as suitable for contact with cosmetic products, and the declaration of conformity is available with the product.
Suitable uses
- Facial serums and oils – the narrow neck limits the access of air to the contents, and 30 ml is a common pack size for this type of product.
- Tinctures and alcohol extracts – glass does not react with alcohol or with plant ingredients.
- Samples and travel packs – a bottle with a solid cap is easy to close and carry, with no risk of accidental dispensing.
- Test batches – in a small volume, stability, cloudiness or colour change is easier to monitor when developing a recipe. Cloudiness is visible in frosted glass when the bottle is held up to the light.
A bottle with an 18 mm neck is not suitable for thick creams and butters, as the contents would be difficult to get out.
Nominal volume and brimful capacity
The nominal volume of 30 ml is the amount the bottle is designed for in normal filling. The brimful capacity given in the parameters is the physical volume up to the top of the neck. The difference is a reserve for the closure and for the expansion of the contents when the temperature changes. The bottle is therefore filled to the nominal volume. If it were filled to the brim, the contents would leak out after the cap is tightened, and with oils they would remain on the thread.
When filling with a measuring cup or syringe, weigh or measure the first bottle to find out where the 30 ml level is. The remaining bottles can then be filled quickly according to the level visible through the frosted glass.
Closure and seal
The aluminium cap has an EPE sealing liner inside, made of foamed polyethylene, which sits on the rim of the neck and prevents leaking. Tightening by hand is enough, as forcing the cap needlessly compresses the liner and does not improve the seal. For contents with a higher proportion of essential oils or with alcohol, we recommend testing the seal and the behaviour of the liner on one bottle by storing it upside down for several days.
The set is closed with a solid cap, so the contents are dispensed by pouring or by decanting into another container. Closures with the same neck type, as well as ready-made combinations with a dropper or a pump, are available in the Handymade range.
Preparation before filling and reuse
Before the first filling, a new bottle is washed with warm water, rinsed and disinfected with ethanol or isopropyl alcohol. It is left to dry completely with the neck facing down, because residual water would dilute oil-based contents and could burden the preservative system of a water-based recipe. The cap is disinfected in the same way, and the EPE liner is not removed in the process.
Glass can be reused, and after washing and disinfection a new batch is filled into the bottle. It is sensible to check the liner in the cap. If it has softened after the previous contents, changed colour or retains a scent, it is replaced with a new cap.
Do not pour hot product into the bottle. Glass does not tolerate sudden temperature differences well, and hot contents also take up a larger volume, so after cooling the level drops below the expected line. Emulsions and oils are filled only after they have cooled to room temperature.
Good to know
Frosted glass diffuses light, but it is not a substitute for amber or blue glass. For light-sensitive ingredients, such as oils rich in unsaturated fatty acids or active ingredients that decompose in light, the bottle is stored in a box or away from direct daylight.
At the end of its life, the bottle is recycled as glass and the aluminium cap as metal. Separate them from each other before disposal.
Frequently asked questions
Parameters
Clear frosted glass bottle, 18 mm, 30 ml
Aluminium cap, silver, 18 mm
Product documentation
- DrawingTechnical drawing
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.
































































































