GLASS BOTTLES 30 ml
Blue Glass Bottle, Black Aluminium Cap, 30 ml
Pack size5 ml10 ml15 ml30 ml50 ml100 ml
A blue glass bottle with a volume of 30 ml and a black aluminium cap is used for packaging smaller volumes of facial oils, oil serums, tinctures and fragrance blends. full description
Lowest price in the last 30 days: €0.62
Total for 1 pcs: €0.62
Quantities add up across all combinations of this bottle.
Product description
A blue glass bottle with a volume of 30 ml and a black aluminium cap is used for packaging smaller volumes of facial oils, oil serums, tinctures and fragrance blends. Blue glass lets through less light than clear glass, so contents that are sensitive to light, such as vegetable oils or blends with essential oils, are better protected in it. Glass does not absorb scent or colour and can be refilled after washing.
The set consists of a medicine bottle with an 18/410 neck finish and a screw-on aluminium cap with a foam polyethylene (EPE) liner. The contents are poured or measured out of the bottle, not dispensed in drops. It is therefore suitable for products that are poured into the palm, into a bath or into a measuring cup. Both the bottle and the cap are declared as suitable for contact with cosmetic products; you will find the declaration of conformity with the product.
What the set is suitable for
- Facial and body oils – a volume of 30 ml corresponds to a common pack size of facial oil for several weeks of use.
- Oil serums and blends with active ingredients – anhydrous serums with vitamin E, coenzyme Q10 or oil extracts, which are dispensed in small amounts into the palm.
- Tinctures and alcohol extracts – glass does not react with alcohol, and the blue colour dampens the light that fades plant colours.
- Essential oil blends and fragrance oils – samples and travel packs. We recommend checking the tightness of the cap with undiluted essential oil before a larger production run.
- Samples and trial batches – a small volume for testing a recipe or for handing out samples to customers. The set is also of technical grade, so it can also be used for samples of candle fragrance oils.
Nominal and total volume
The 30 ml figure is the nominal volume, that is, the amount the bottle is intended for in normal filling. The total brimful volume is the physical volume up to the neck and you will find it in the parameters. The difference between them is a reserve for the cap with its liner and for the expansion of the contents with temperature changes. Always fill to the nominal volume, not to the brim. An overfilled bottle will overflow onto the thread after closing and the cap will then not seal.
Oils and firmer blends that are heated during production should be left to cool to at least room temperature before filling. After cooling, the volume decreases and the level in the neck would otherwise drop visibly below the expected level.
Cap and seal
The aluminium cap is tightened by hand, without tools. The foam polyethylene liner sits on the rim of the neck and forms the seal. If it is tightened by force, the aluminium may deform and the thread will then not hold. When reusing, check the liner. If it is compressed or damaged, replace the cap.
Other closures from the Handymade range, such as droppers or pumps, also fit the 18/410 neck. Ready-made combinations of bottle and closure have their own description. When putting together your own combination, check the tightness, dispensing and behaviour of the packaging with your specific formulation.
Good to know
- Preparation before first filling – wash the bottle, rinse it, disinfect it with isopropyl alcohol or ethanol and leave it to dry completely with the neck facing down. It is enough to wipe the cap with alcohol and leave it to air.
- Reuse – glass can be washed and refilled. When changing the contents, especially after essential oils, bear in mind that the scent clings more to the cap liner than to the glass.
- Glass and temperature – sudden changes between hot and cold can damage glass. Do not pour hot contents into a cold bottle and do not place the bottle on a wet cold surface straight after sterilisation.
- Recycling – unscrew the cap before disposal. The glass goes in glass recycling and the aluminium cap in metal recycling.
- Use outside cosmetics – the set is declared for cosmetic products. It is not declared for contact with food.
Check the clean bottle against the light before filling, as blue glass hides small impurities and residual water on the wall. Residual water in an oil-based or anhydrous product is a common cause of cloudiness and spoilage.
Frequently asked questions
Parameters
Glass bottle, vial, blue, 18 mm, 30 ml
Aluminium cap, black, 18 mm
Product documentation
- DrawingTechnical drawing
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.





























































































