Spend over €100 for discounted shipping!

+421 950 333 113info@handymade.store

GLASS BOTTLES 100 ml

Gloss Black Glass Bottle, White Safety Cap & Dropper, 100 ml

Pack size10 ml15 ml30 ml50 ml100 ml

Black glossy glass bottle with a nominal volume of 100 ml , supplied as a ready-made set with a plastic dropper insert in the neck and a white screw cap. full description

AvailabilityIn stock · 133 pcs
Product codeO18SCL100-OVV18PB4
€1.32incl. VAT

Lowest price in the last 30 days: €1.32

Volume pricing
1–69 pcs€1.32Your price
70–1049 pcs€1.24−6 % · 1× plato
1050–5039 pcs€1.17−11 % · 15× plato
from 5040 pcs€1.08−18 % · 72× plato

Total for 1 pcs: €1.32

Quantities add up across all combinations of this bottle.

Add 69 more pcs and the price drops to €1.24/pc.

Product description

Black glossy glass bottle with a nominal volume of 100 ml, supplied as a ready-made set with a plastic dropper insert in the neck and a white screw cap. The black glass protects the contents from light, so it is particularly suitable for facial and body oils, oil serums and blends with essential oils. The dropper insert dispenses the contents drop by drop and also limits spillage if the bottle tips over.

The set is declared suitable for contact with cosmetics.


What it is suitable for

  • Facial oils and oil serums – dispensing drop by drop matches the amount usually applied to the face, and the dark glass protects sensitive oils from light.
  • Blends with essential oils – massage, hair or aromatic oils where precise measuring matters.
  • Liquid serums and toners – thin water-based preparations flow smoothly through the dropper insert. If a larger amount is applied per use, a fine mist sprayer or a pump with the same neck type is a better choice.
  • Small batches and your own brand – glossy black glass with a white cap gives the whole range a uniform look without any further modification.

How the set works

Before filling, remove the dropper insert from the neck, fill the bottle and press the dropper insert back so that it sits firmly in the neck. Then screw on the cap. To use it, unscrew the cap and tilt the bottle – the contents come out drop by drop. The dispensing speed depends on the viscosity. Thin oils and water-based serums flow smoothly, thick oils flow slowly, and this way of dispensing is not suitable for thick emulsions.

Fill the bottle up to the nominal volume, not up to the neck. Once pressed in, the dropper insert takes up part of the neck, and if the bottle is overfilled, the contents will overflow when you close it.


Nominal and total volume

The nominal volume is the amount the bottle is intended to hold under normal filling. The brimful volume is the physical volume up to the rim of the neck, and you can find it in the parameters. The difference is a reserve for the dropper insert, which is why the bottle is filled up to the nominal volume.


Good to know

  • Preparation before the first filling – wash the bottle, the dropper insert and the cap, disinfect them with isopropyl alcohol or ethanol and let them dry completely.
  • Glass and temperature – do not pour hot contents into the bottle. Let the preparation cool to room temperature first.
  • Plastic parts – the dropper insert is made of PP, the cap of PP and PE. With concentrated essential oils, alcohol-based extracts and solvents, we recommend checking how the plastic behaves with your specific formulation over a longer period.
  • Reuse – the glass bottle can be used again after washing and disinfection. After pressing the dropper insert back in, check that it seals in the neck.
  • Other closures – closures with the same neck type and ready-made combinations are available in the Handymade range. With your own combination, we recommend checking the seal, the dispensing and the behaviour of the packaging with your specific formulation.
  • Waste sorting – glass goes into glass waste; remove the dropper insert and the cap before disposal and sort them as plastic.

The set as a whole is intended for cosmetics. Only the glass bottle on its own has a certificate for direct food contact; the dropper insert and the cap do not have one.


Frequently asked questions

Does a 100 ml black glass bottle protect the contents from light?
Yes, black glass protects the contents from light. It is therefore suitable for light-sensitive preparations, for example facial oils, oil serums or essential oil blends. However, the contents cannot be seen through the wall, so you check the amount by unscrewing the cap or by weighing.
How do you fill a 100 ml glass bottle with a dropper insert?
Before filling, the dropper insert is removed from the neck, and the bottle is filled with a funnel or directly from a beaker up to the nominal volume. Then the dropper insert is pressed back into the neck and the cap is screwed on. Before the first filling, all parts are washed, disinfected and left to dry completely.
Is the black glass bottle with a dropper insert suitable for essential oils?
The glass bottle is suitable for essential oils, and the black colour protects the contents from light. The dropper insert and the cap are plastic, so with undiluted essential oils we recommend checking how the plastic behaves with the specific oil after longer storage. For blends diluted in a carrier oil, the set is a common choice.
Can a 100 ml black glass bottle be reused?
Yes, the glass bottle can be refilled after thorough washing and disinfection. Remove oil residues with warm water and washing-up liquid, rinse the bottle with ethanol or isopropyl alcohol and let it dry completely. With the dropper insert, check that it holds firmly and seals after being pressed back in.
Is the glass bottle with a white safety cap suitable for food?
The set as a whole is not approved for contact with food. Only the glass bottle on its own has a certificate for direct food contact; the plastic dropper insert and the cap do not have one. The set is declared suitable for contact with cosmetics and is intended for that purpose.

Parameters

Glass bottle, boston round, black glossy, 100 ml

Product colour
Black
Country of origin
China
Nominal capacity
100
Brimful capacity
105 ml
Diameter
44,5 mm
Thread type
18/410
Height
112 mm
Product material
Glass

Plastic dropper for glass vials, 18 mm, short

Product colour
Clear
Country of origin
China
Diameter
14,5 mm
Thread type
18/410
Height
17,5 mm
Product material
PPPlastic

White Plastic Tamper Evident Safety Cap, 18/410

Product colour
White
Country of origin
China
Diameter
23,9 mm
Thread type
18/410
Height
23 mm
Product material
PPPlasticPE
REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.