Plastic bottle, clear, white fine mist sprayer, 18 mm, 100 ml

A clear 100 ml PET bottle and a white fine mist sprayer with an 18 mm thread make a ready-made set for your own toners, facial mists and hydrosols. The clear plastic shows the contents and the liquid level, so you can see at a glance how much product is left and whether anything has settled in it. The bottle is light and does not break if dropped, which makes it suitable for the bathroom and for travel. The fine mist sprayer disperses the contents into a mist in small doses, so the set is used mainly for thin water-based and alcohol-based solutions.

The set is declared suitable for contact with cosmetics. The bottle on its own has a certificate for direct food contact; the set with the fine mist sprayer, as a whole, is intended for cosmetic and technical use.

What the set is suitable for

• Facial toners and mists – water-based solutions with active ingredients, glycerine or hyaluronic acid are applied evenly without touching the skin with your hands, which also makes hygiene easier during use.
• Hydrosols – rose, lavender or calendula water to refresh the skin during the day or to set a serum after application.
• Leave-in hair sprays – thin solutions to make combing easier or to refresh the hair between washes.
• Alcohol-based solutions – air and fabric fresheners with a fragrance composition, or alcohol for spraying the surface of cold process soap to prevent soda ash.
• Making aids – water to moisten a mould, a solution for cleaning the work surface, samples for testing fragrance.

How the set works

The fine mist sprayer screws onto the bottle neck with an 18 mm thread. The dip tube reaches almost to the bottom, so most of the contents can be sprayed out without tilting the bottle. One press releases approximately 0.13 ml. The toner is therefore dispensed in small amounts, and a few presses spread it evenly over the face or hair.

Fill the bottle up to the nominal volume, that is, the volume the bottle is designed for during normal filling. The total volume to the brim is larger; it is the physical volume up to the neck. The difference serves as a reserve for the sprayer dip tube and for the expansion of the contents when the temperature changes. A bottle filled to the brim would overflow when the fine mist sprayer is fitted.

Good to know

Clear PET does not protect the contents from light. We recommend keeping hydrosols, solutions with vitamins and products with essential oils in it away from direct sunlight. For long-term storage of sensitive blends, an amber or blue glass bottle is more suitable; the clear set is better for daily use.

A fine mist sprayer of this type is built for liquids with low viscosity. Thick emulsions, gels and oils pass through it with difficulty or clog the nozzle. With your own blend, for example a toner with a higher proportion of glycerine or an oil spray, we recommend testing how the fine mist sprayer behaves beforehand.

Water-based solutions without alcohol need a preservative. Although the fine mist sprayer limits contact of the contents with your hands, the product stays in the bottle for longer, and a water-based environment without preservation will not last.

Once empty, the set can be washed and used again, ideally for the same type of contents. The bottle is made of PET and the fine mist sprayer of polypropylene; both parts belong in sorted plastic waste, and we recommend separating them before recycling. You will find closures with the same neck type and other ready-made packaging-plus-closure combinations in the Handymade range. With your own combination, we recommend checking the tightness and dispensing with your specific formulation.

Frequently asked questions