+421 950 333 113info@handymade.store−10 %Shop now

GLASS BOTTLES 50 ml

Clear Frosted Glass Bottle, Black Lotion Pump with Black Overcap, 50 ml

Pack size15 ml30 ml50 ml

The glass bottle with a lotion pump is ready-to-use packaging for creams, facial emulsions and body lotions that are dispensed by pressing the pump. full description

AvailabilityPre-order
Product codeO18SN050-OVD18PC3
€1.04incl. VAT

Lowest price in the last 30 days: €1.04

Expected back in stock: 25 Nov.This variant is currently out of stock — your order will be a pre-order and delivery may take longer.
Volume pricing
1–251 pcs€1.04Your price
252–1007 pcs€0.95−8 % · 1× plato
1008–5039 pcs€0.88−15 % · 4× plato
from 5040 pcs€0.78−25 % · 20× plato

Total for 1 pcs: €1.04

Quantities add up across all combinations of this bottle.

Product description

The glass bottle with a lotion pump is ready-to-use packaging for creams, facial emulsions and body lotions that are dispensed by pressing the pump. Frosted glass diffuses light and shows the contents only as a silhouette, so you can see how much cream is left in the bottle. The nominal volume of 50 ml corresponds to the usual size of a face cream or a thicker serum. Both the bottle and the pump are declared as suitable for contact with cosmetics.


What the set is suitable for

The lotion pump draws the contents up through a tube and pushes them out through the top nozzle, so it works best with textures that flow at least slowly. Suitable products include in particular:

  • Face creams and O/W emulsions – day and night creams, hydrating emulsions, lighter gel creams.
  • Thicker serums – thickened water-based serums and emulsion serums, which would be difficult to dispense with a dropper.
  • Body lotions and hand creams – in a smaller pack as a sample, travel size or gift pack.
  • Cream make-up bases and BB creams – the pump dispenses approximately the same dose with each press.

The pump is not suitable for thick balms, ointments and anhydrous products that solidify at room temperature. Such textures are difficult or impossible to push out of the pump, and a jar is more suitable.


How to use the pump

One press of the pump dispenses approximately 0.14 ml of cream. The actual dose depends on the thickness of the contents and on whether the pump is pressed all the way down. After filling and screwing on the pump, press it several times to prime it until the tube fills and the cream starts to come out.

The main advantage over a jar is hygiene. The cream is not taken out with the fingers, only the inside of the pump comes into contact with the contents, and the packaging is not opened with each use. The tube cannot draw up all of the contents at the bottom, so it is wise to expect a small residue.

Before filling an entire batch, test the dispensing with a small amount of the finished cream. If the pump is hard to press or dispenses an uneven dose, the texture is too thick for a lotion pump.


Filling and volume

The nominal volume is the amount the bottle is designed for with normal filling. The total brim-full volume is the physical volume up to the neck and can be found in the parameters. The difference between them leaves room for the pump tube, which pushes the level upwards after screwing on, and for the expansion of the contents when the temperature changes. For this reason, fill up to the nominal volume, not to the brim.

Let the emulsion cool to room temperature before filling. Glass does not tolerate sudden changes in temperature, and a hot mass could also damage the plastic parts of the pump.


Good to know

  • Preparation before the first filling – wash the bottle, disinfect it with isopropyl alcohol or ethanol and let it dry completely. It is enough to rinse the pump and let it dry with the tube pointing downwards.
  • Reuse – the glass can be washed and used again. Rinse the pump with warm water by pressing it several times in a container of water until clean water comes out of the nozzle. Dried cream residues will clog the pump.
  • Particles in the contents – scrubs, creams with wax beads or incompletely dissolved ingredients can block the valve of the pump.
  • Other closures – closures with the same neck type and ready-made combinations can be found in the Handymade range. If you use your own combination, we recommend checking the tightness and dispensing with the specific formulation.
  • Recycling – the bottle belongs in glass waste, and the pump is made of polypropylene and is sorted as plastic. Take the set apart before throwing it away.

The set is intended for cosmetic products. Neither the bottle nor the pump is declared for contact with food, so it is not suitable for homemade oils, syrups or infusions.


Frequently asked questions

Does frosted glass protect the contents from light?
Frosted glass diffuses light, but it is not a substitute for amber or blue glass. The contents are visible as a silhouette, which shows how much cream is left in the bottle. For creams with light-sensitive ingredients, such as vitamin C or retinol, we recommend using dark glass or storing the product out of direct sunlight.
How much cream does one press of the lotion pump dispense?
Approximately 0.14 ml per full press. With thicker creams the dose is usually slightly smaller, and with light emulsions it is close to the stated value. With 50 ml of contents, this corresponds to several hundred doses, and the exact number depends on the texture and on the residue that the tube does not draw up at the bottom.
Is the lotion pump suitable for thick balms and ointments?
No, the pump is intended for creams and emulsions that flow. Thick balms, ointments and anhydrous products that solidify at room temperature cannot be pushed out of the pump or will block it. A jar is more suitable for such textures. If your product is on the borderline between a thick cream and a balm, a test with a small amount before filling will help.
How many millilitres can be filled into the bottle?
The bottle is filled up to the nominal volume of 50 ml. The total brim-full volume is larger and can be found in the parameters, but this space serves as a reserve for the pump tube and for the expansion of the contents. If the bottle is overfilled, the cream leaks through the thread after the pump is screwed on and the packaging does not seal.
Can the bottle with the pump be reused?
Yes, both parts can be cleaned and filled again. Wash the glass, disinfect it with alcohol and let it dry. Rinse the pump with warm water by pressing it repeatedly until clean water comes out of the nozzle, and let it dry. A pump with dried cream inside usually dispenses unevenly, and it is better to replace it.

Parameters

Glass bottle, frosted clear, 18 mm, 50 ml

Product colour
Frosted
Country of origin
India
Nominal capacity
50
Brimful capacity
57 ml
Diameter
37,8 mm
Thread type
18/410
Height
92,3 mm
Product material
Glass

Black plastic cream pump 18 mm, black top

Product colour
Black
Country of origin
China
Diameter
22,1 mm
Thread type
18/415
Height
41,6 mm
Product material
PPPlastic
Tube length
115 mm
Dose
0,14 ml

Product documentation

PPWRPackaging Declaration (PPWR)
Glass bottle, frosted clear, 18 mm, 50 ml · O18SN050PDF ↓
Black plastic cream pump 18 mm, black top · OVD18PC3PDF ↓
PDSProduct Data Sheet
Glass bottle, frosted clear, 18 mm, 50 ml · O18SN050PDF ↓
Black plastic cream pump 18 mm, black top · OVD18PC3PDF ↓
DrawingTechnical drawing
Glass bottle, frosted clear, 18 mm, 50 ml · O18SN050PDF ↓
Black plastic cream pump 18 mm, black top · OVD18PC3PDF ↓
Download all (ZIP)

6 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.