GLASS BOTTLES 50 ml
Clear Frosted Glass Bottle, White Oral Spray, 50 ml
A glass bottle with an oral sprayer is used for filling and selling oral sprays and other liquid cosmetic products applied in small, targeted doses. full description
Lowest price in the last 30 days: €1.71
Total for 1 pcs: €1.71
Quantities add up across all combinations of this bottle.
Product description
A glass bottle with an oral sprayer is used for filling and selling oral sprays and other liquid cosmetic products applied in small, targeted doses. The set consists of a 50 ml frosted glass bottle and a white oral sprayer with an 18/410 neck finish, which directs the sprayed dose straight into the mouth. You receive ready-to-use packaging that only needs to be washed, filled and screwed on.
Frosted glass softens the incoming light and the contents appear as a silhouette, so you can see how much product remains in the bottle. The sprayer is made of polypropylene. Both parts have the same neck type, so the closure fits without adapter rings. The whole set is declared as suitable for contact with cosmetics; the declaration of conformity for both the bottle and the sprayer is available with the product.
What the set is suitable for
- Oral sprays and breath fresheners – the dose is directed into the mouth, which is the main purpose of an oral sprayer.
- Herbal and water-alcohol sprays – thin solutions pass through the sprayer without problems, and the metered dose stays the same with every use.
- Hydrosols and toners for targeted application – when only a small area needs treatment, for example a single spot on the face.
- Samples and travel packs – the 50 ml volume suits smaller batches and testing formulations.
How to fill and dispense
The bottle has a nominal volume of 50 ml. This is the volume it is designed for in normal filling. The brimful capacity listed in the parameters is the physical volume up to the neck. The difference between the two forms a reserve for the sprayer dip tube and for the expansion of the contents when the temperature changes. Fill the bottle to the nominal volume, not to the brim. If you fill it to the brim, part of the contents will leak out through the neck when the sprayer is screwed on.
The sprayer draws the contents up through a dip tube from the bottom, and one press releases approximately 0.1 ml. After filling and screwing on the sprayer, pump it several times to prime it, so that the dip tube and nozzle fill and the first dose is complete. With thin water and alcohol solutions, the sprayer works smoothly. Thick, gel or oil contents may clog the nozzle or change the shape of the spray. Test the behaviour with your specific formulation on one piece first, and only then fill the whole batch.
Before the first filling, compare the length of the dip tube with the height of the bottle. If the tube is longer than necessary, shorten it with a sharp knife so that it ends just above the bottom. The sprayer will then draw up the remainder of the contents as well.
Good to know
The frosted surface of the glass scatters light, but it does not provide complete protection from it. For light-sensitive contents, for example sprays with a higher proportion of plant extracts or essential oils, dark glass or storage out of direct sunlight is more suitable.
Glass does not tolerate sudden temperature changes. Fill it with contents that have cooled down, not hot ones, and do not put the bottle straight from the fridge into hot water. For products with a high proportion of essential oils or solvents, we recommend checking the long-term compatibility of the plastic sprayer in the finished formulation.
Before first use, wash both parts, disinfect them with alcohol or isopropyl alcohol and let them dry completely. During disinfection, pump the sprayer several times so that the dip tube and nozzle are rinsed as well. The bottle can be reused. We recommend replacing the sprayer after longer use or when you change the formulation, as residues of the previous contents are difficult to remove from the dip tube. For disposal, separate the glass and the plastic sprayer: the glass goes with glass and the sprayer with plastics.
The set is intended for cosmetic products. Neither the bottle nor the sprayer is declared for contact with food, so it is not suitable for food syrups, food supplements or edible oils.
The bottle has an 18/410 neck finish, so it can also be combined with other closures with the same neck type from the Handymade range. When making your own combination, check the tightness and dispensing with your specific contents.
Frequently asked questions
Parameters
Glass bottle, frosted clear, 18 mm, 50 ml
Throat spray pump, white, 18/410
Product documentation
- DrawingTechnical drawing
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.













































































