Yes, the glass bottle with dispenser is suitable for most common liquid and slightly viscous cosmetic products, such as light oil serums, emulsion fluids or watery concentrates. For very thick formulations (e.g. balms or very rich emulsions) we recommend carrying out a trial filling and testing whether the dispenser provides smooth and even dosing without excessive pressure.

The packaging can be reused provided that hygiene principles are followed. Before the first filling and before each further use we recommend mechanically cleaning the bottle (from residues of the previous contents) and then disinfecting it with a suitable alcohol-based preparation, for example with isopropyl alcohol or plant ethanol. After disinfection, let the packaging dry thoroughly at room temperature and only then fill it with the prepared product. This procedure reduces the risk of microbial contamination and helps maintain the quality of the formulation.

We recommend storing the filled bottle in a dry, clean environment, away from direct sunlight and sources of heat. The stability of the contents depends on the specific formulation, therefore follow the recommendations for the recipe (pH, content of volatile substances, preservation system). It is important to always close the bottle thoroughly with the dispenser after use to minimize the product’s contact with air and impurities. When transporting or storing a larger number of packages, it is advisable to use stands or boxes that prevent them from tipping over and from mechanical damage.

If you decide not to use the packaging further, we recommend recycling it according to the types of materials used, as indicated in the product parameters. The glass part of the bottle can usually, after thorough emptying and cleaning, be placed in the container intended for glass. A dispenser composed of several components (e.g. plastic, metal spring) should, if the local collection system allows it, be disassembled and the individual parts sorted by material. If the local collection of mixed plastic parts does not distinguish between them, place the dispenser in the appropriate container according to the recommendations of your collection system. Always follow the current local waste separation rules and the information in the parameter table next to the product.

On the website you can use the advanced filter, which helps you narrow down the selection of packaging according to your needs. You can find it at the top of the page after clicking on the selected category of packaging material. In the advanced filter you can select packaging according to neck type, size, colour and material, which makes it easier to find a suitable bottle, vial, jar or dispenser exactly for your product. We recommend combining several filters at once so that you can more quickly reach the packaging that meets the desired design and technical requirements.