+421 950 333 113info@handymade.store−10 %Shop now

GLASS BOTTLES 15 ml

Clear Glass Bottle, Glossy Silver White Pump, 15 ml

Pack size10 ml12 ml15 ml30 ml50 ml100 ml

Glass bottle with a pump for face serums , face and hair oils and other liquid preparations that are applied in small amounts. The clear glass shows the colour and clarity of the contents. full description

AvailabilityIn stock · 579 pcs
Product codeO18SP015-OVD18PSBL
€1.04incl. VAT

Lowest price in the last 30 days: €1.04

Save €0.03 with this set

Volume pricing
1–199 pcs€1.04Your price
200–999 pcs€0.98−6 %
1000–4999 pcs€0.93−11 %
from 5000 pcs€0.83−21 %

Total for 1 pcs: €1.04

Quantities add up across all combinations of this bottle.

Product description

Glass bottle with a pump for face serums, face and hair oils and other liquid preparations that are applied in small amounts. The clear glass shows the colour and clarity of the contents. Each press of the pump dispenses approximately 0.14 ml, so the product is taken out without pouring and without fingers touching the contents. The nominal volume of 15 ml suits samples, travel packs and concentrated preparations, where one bottle lasts for several weeks.


What it is used for

The pump works with liquid and slightly thicker formulations. The bottle is suitable for water-based and glycerine serums, light O/W emulsions, eye serums, oil serums and blends of vegetable oils. For concentrated preparations, where the usual dose is a few drops, it allows more precise measuring than tipping the bottle.

The small volume is also suitable for trial batches. A quantity for testing stability, fragrance and texture fits into 15 ml without filling a large container. Thick creams, butters and balms do not belong in this bottle, as the pump will not draw them up or will dispense an incomplete dose.

  • Face serums and toners – low viscosity, the pump dispenses an even dose.
  • Face and hair oils – oils are pumped easily, and the dose is applied directly to the palm or fingertips.
  • Light emulsions – with a thicker consistency, we recommend checking that the pump dispenses the full dose and that the dip tube draws up the rest of the contents at the bottom.

Pump and filling

The pump screws onto the neck of the bottle, the dip tube reaches the bottom and the product comes out through the outlet channel in the pump head. After the first filling, press the head several times until the system fills and begins to dispense a full dose. The dip tube is supplied longer than the height of the bottle. Before first use, shorten it with a straight cut so that it ends just above the bottom.

Nominal volume is the volume the packaging is designed for under normal filling. Brimful volume is the physical volume up to the neck. The difference between them forms a reserve for the dip tube and the lower part of the pump, and for the expansion of the contents when the temperature changes. The bottle is filled to the nominal volume, not to the brim.

When filling, leave free space in the neck. After the pump is screwed on, the dip tube and the pump body are immersed in the contents and the level rises. An overfilled bottle overflows when closed and the product gets onto the thread, where it is sticky and makes opening difficult.


Good to know

Before the first filling, wash the bottle, disinfect it with isopropyl alcohol or ethanol and let it dry completely. It is enough to rinse the pump with clean water or ethanol, pump it through several times and let it dry with the head facing down. The set is prepared for reuse in the same way. The bottle tolerates new contents without restrictions; for the pump, what matters is how well the previous product can be cleaned out of the dip tube and the valve.

Clear glass does not protect the contents from light. Preparations with light-sensitive ingredients, for example vitamin C, retinol or some plant extracts, are better kept in amber glass or in the dark. With this set, store them away from direct sunlight or allow for a shorter period of use.

Do not fill the glass with a hot phase and avoid sudden changes of temperature, especially when filling a still warm emulsion into a cold bottle. The parts of the pump are made of polypropylene and aluminium. For contents with a high proportion of essential oils, alcohol or solvents, we recommend checking how the pump behaves in the specific formulation: that the valve seals, the dip tube does not soften and the dose remains the same even after several weeks.

The set is declared suitable for contact with cosmetic products. At the end of its life, the pump is separated from the bottle and the two parts are sorted separately.

With formulations that thicken over time or contain undissolved particles, the valve or the outlet channel may become blocked. Before filling a larger number of pieces, leave one bottle to stand for several days and check that the pump dispenses the product in the same way as after filling.


Frequently asked questions

How much product does the pump on the 15 ml glass bottle dispense per press?
One press dispenses approximately 0.14 ml. For a serum or face oil, one to two presses are usually enough for a single application to the face. The actual dose depends on the viscosity of the contents; with thicker preparations it may be smaller or incomplete. After the first filling, press the head several times until the dip tube fills.
Does the clear glass bottle with a pump protect the contents from light?
No, clear glass lets light through and does not protect the contents from it. It is therefore suitable for preparations whose ingredients are stable in light, or for products that are stored in the dark and used up within a short time. For light-sensitive ingredients such as vitamin C or retinol, amber or blue glass is safer.
Can the 15 ml glass bottle with a pump be used for a face oil?
Yes, face and hair oils are among the contents for which the pump is most often used. The oil is pumped easily and the dose is applied directly to the palm. For blends with a high proportion of essential oils, we recommend checking that the plastic parts of the pump do not soften after longer contact and that the valve seals.
Why is the bottle with a pump filled only to 15 ml when more would fit?
The difference between the nominal and the brimful volume is a reserve for the pump and for the expansion of the contents. After screwing on, the dip tube and the pump body are immersed in the product and the level rises. If filled to the brim, the contents would overflow onto the thread and the pump could not be tightened. The nominal volume of 15 ml is the quantity allowed for under normal filling.
How do I clean the glass bottle with a pump before reuse?
Wash the bottle with warm water and washing-up liquid, rinse it, disinfect it with isopropyl alcohol or ethanol and let it dry. Immerse the pump in warm water or ethanol and pump it several times until clean liquid comes out of the head. Then let it dry with the head facing down. Residues of oils or thick preparations in the dip tube may not be completely removable.

Parameters

Clear glass bottle, 18 mm, 15 ml

Product colour
Clear
Country of origin
China
Nominal capacity
15
Brimful capacity
18 ml
Diameter
28,5 mm
Thread type
18/410
Height
64 mm
Product material
Glass

Plastic dispenser, 18/415, white-silver, glossy

Product colour
SilverWhiteClear
Country of origin
China
Diameter
22,9 mm
Thread type
18/415
Height
45 mm
Product material
AluminiumPPPlastic
Tube length
115 mm
Dose
0,14 ml

Product documentation

PPWRPackaging Declaration (PPWR)
Plastic dispenser, 18/415, white-silver, glossy · OVD18PSBLPDF ↓
PDSProduct Data Sheet
Clear glass bottle, 18 mm, 15 ml · O18SP015PDF ↓
Plastic dispenser, 18/415, white-silver, glossy · OVD18PSBLPDF ↓
DrawingTechnical drawing
Clear glass bottle, 18 mm, 15 ml · O18SP015PDF ↓
Plastic dispenser, 18/415, white-silver, glossy · OVD18PSBLPDF ↓
Download all (ZIP)

5 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.