+421 950 333 113info@handymade.store−10 %Shop now

GLASS BOTTLES 15 ml

Clear Glass Bottle, Round, Glossy Silver White Pump, 12 ml

Pack size10 ml12 ml15 ml30 ml50 ml100 ml

The glass medicine bottle with pump is used for packaging serums, facial oils and light emulsions that are applied in small amounts. full description

AvailabilityIn stock · 95 pcs
Product codeO18SP012-OVD18PSBL
€1.23incl. VAT

Lowest price in the last 30 days: €1.23

Volume pricing
1–199 pcs€1.23Your price
200–999 pcs€1.14−7 %
1000–4999 pcs€1.05−14 %
from 5000 pcs€0.95−23 %

Total for 1 pcs: €1.23

Quantities add up across all combinations of this bottle.

Product description

The glass medicine bottle with pump is used for packaging serums, facial oils and light emulsions that are applied in small amounts. A volume of up to 12 ml is enough for an eye serum, a travel size or a formulation sample. The clear glass shows the colour and the level of the contents, and the pump dispenses them with a press, so there is no need to reach into the bottle with your fingers during use.

The set consists of a rounded clear glass bottle and a plastic pump in a glossy white and silver finish. Both parts are declared as suitable for contact with cosmetic products.


What it is suitable for

  • Facial and eye serums – both water-based and oil-based, where a small amount is enough for a single use.
  • Facial oils and oil blends – dispensed with a press, without pouring into the palm.
  • Light emulsions – runny fluids and thin facial lotions.
  • Samples and small batches – when testing a new formulation, the clear glass lets you see a change of colour, cloudiness or phase separation without opening the bottle.

Clear glass does not protect the contents from light. Fill formulations containing light-sensitive ingredients into dark glass, or keep the filled bottle in a box or in a closed cabinet.


Dispensing and filling

One press dispenses approximately 0.14 ml. Before first use, prime the pump by pressing it several times until the tube fills.

The nominal volume of 12 ml is the amount the bottle is designed for in normal filling. The brimful capacity, given in the parameters, is the volume of the glass up to the neck and is higher. Fill only up to the nominal volume and leave the space above the liquid level empty.

The tube is supplied longer than the height of the bottle. Before fitting it, shorten it with a slanted cut so that it ends just above the bottom.


Good to know

Before the first filling, wash the bottle, disinfect it with isopropyl alcohol or ethanol and let it dry completely. Treat the pump, including the tube, in the same way. Otherwise, residues of water or disinfectant in the tube would get into the first doses.

The pump is made of plastic (PP) and aluminium. For formulations with a high proportion of essential oils or solvents, we recommend testing on a sample to check that the plastic parts do not change after several weeks and that the pump still seals properly.

Other closures with the same neck type, which is given in the parameters, also fit the bottle. You will find them in the Handymade range together with other ready-made combinations. If you make your own combination, we recommend checking the tightness and the behaviour of the packaging with your specific formulation. At the end of its life, unscrew the pump and sort it separately from the glass.


Frequently asked questions

How many doses does the 12 ml glass medicine bottle with pump dispense?
With a nominal volume of 12 ml, the pump dispenses approximately 85 doses. One press corresponds to approximately 0.14 ml. The number is a calculation based on the volume of the bottle and the size of the dose. For your own formulation, check it on a filled bottle, especially if you state the yield of the product based on it.
Can the 12 ml glass medicine bottle with pump be filled to the brim?
No, the bottle is filled up to the nominal volume of 12 ml. The brimful capacity is higher, but once the pump is screwed in, the space above the liquid level is taken up by the pump mechanism with its tube. The remainder serves as a reserve for when the contents expand with changes in temperature. If you filled the bottle to the brim, the contents would overflow through the neck when you fit the pump.
Is the 12 ml glass medicine bottle with pump suitable for thick cream?
Thick cream should first be tested with the pump on a single bottle. The set is intended mainly for liquid serums, oils and thin emulsions. For thick textures and products with solid particles, such as scrubs, check that the tube does not clog and that the dose remains consistent even after standing for several days.
Can the 12 ml glass medicine bottle with pump be reused?
The glass bottle can be reused, but we recommend replacing the pump when you fill it with new contents. Wash the glass, disinfect it with isopropyl alcohol or ethanol and let it dry. The inside of the pump and the tube cannot be cleaned as thoroughly, and residues of the old contents in them may spoil the new filling.
Is the 12 ml glass medicine bottle with pump suitable for food?
No, the set is not approved for contact with food. Both the glass bottle and the pump are declared as suitable for contact with cosmetic products, so the set is intended for serums, facial oils and light emulsions. For food, choose packaging whose suitability for food contact is stated in the parameters.

Parameters

Glass bottle, vial, clear, round, 12 ml

Product colour
Clear
Country of origin
India
Nominal capacity
12
Brimful capacity
17 ml
Diameter
29 mm
Thread type
18/415
Height
61,6 mm
Product material
Glass

Plastic dispenser, 18/415, white-silver, glossy

Product colour
SilverWhiteClear
Country of origin
China
Diameter
22,9 mm
Thread type
18/415
Height
45 mm
Product material
AluminiumPPPlastic
Tube length
115 mm
Dose
0,14 ml

Product documentation

PPWRPackaging Declaration (PPWR)
Plastic dispenser, 18/415, white-silver, glossy · OVD18PSBLPDF ↓
PDSProduct Data Sheet
Glass bottle, vial, clear, round, 12 ml · O18SP012PDF ↓
Plastic dispenser, 18/415, white-silver, glossy · OVD18PSBLPDF ↓
DrawingTechnical drawing
Plastic dispenser, 18/415, white-silver, glossy · OVD18PSBLPDF ↓
Download all (ZIP)

4 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.