Yes, the packaging can be reused provided that hygiene principles are observed. Before each new filling, we recommend thoroughly cleaning and rinsing both the bottle and the spray pump, and then disinfecting them with a suitable alcohol solution, for example using the products IPA 99 % isopropyl alcohol or Ethanol 96 % denatured, plant-based. Only after complete drying is the bottle ready to be refilled.

The bottle with spray pump is ideal for liquid products of low to medium viscosity where fine and even atomization is important. Typically, these include facial and body sprays, thermal waters, hair tonics, aromatic blends, air fresheners or auxiliary alcohol solutions. For thicker emulsions or oil serums it is always necessary to test whether the specific formulation passes reliably through the spray pump.

First, we recommend mechanically rinsing the packaging with warm water and a suitable cleaning agent that is compatible with your type of formulation. Then thoroughly rinse the bottle and the dip tube with clean water so that no detergent residues remain. In the next step, disinfect the packaging with alcohol – for example, products such as IPA 99 % isopropyl alcohol or Ethanol 96 % denatured, plant-based are suitable. After disinfection, allow all parts to dry completely at room temperature, and only then refill the container.

If you decide not to use the packaging any longer, we recommend first emptying it as thoroughly as possible and removing product residues. The glass part of the bottle can usually be placed, after cleaning, in the container intended for glass recycling, while the plastic spray pump belongs in plastic waste. Always follow the recycling symbols and the information given in the parameters of the specific product on the Handymade.sk website, as well as local waste-sorting rules.

When choosing, you can use the advanced filter, which you will find at the top of the page after clicking on the selected packaging category. In the filter you can conveniently select the neck type, size, colour and material of the packaging and thus narrow the offer down to products that meet your requirements. This procedure is particularly suitable when you are looking for a specific combination of bottle and closure or need several volumes in a unified design.

Before introducing the product to the market or using it long-term, we recommend performing your own compatibility test. Fill the bottle with a smaller amount of the product and monitor the behaviour of the material, tightness and function of the spray pump during repeated use. Focus especially on any softening of plastic parts, changes in colour or odour, or deterioration of atomization. Such a test will help you verify the stability and safe use of the packaging with the specific formulation.