White Glass Bottle, Black Fine Mist Sprayer, Black Overcap, 15 ml

The white glass medicine bottle with a black fine mist sprayer is a ready-made set for 15 ml of facial mist, toner or a perfume sample, with no need to look for a suitable closure. White glass limits the amount of light reaching the contents, which you will appreciate with hydrosols and fragrance blends containing essential oils, as these lose their scent or change colour in light. The sprayer disperses the liquid into a fine mist, so the contents are applied evenly and used sparingly.

The small volume makes this bottle ideal for travel sizes, samples and testers. A facial mist for your handbag, an eau de toilette sample for a customer or a summer hydrosol spray fits in it in a quantity that is used up before the contents start to spoil. The set is declared suitable for contact with cosmetics. It is not approved for contact with food.

What it is suited for

• Facial mists and toners – the sprayer works best with low-viscosity water-based and hydrosol formulations.
• Samples of perfumes and eaux de toilette – alcohol-based solutions are applied evenly and glass does not react with alcohol.
• Travel sizes – hair mist or a refreshing facial spray in a quantity for a few days.
• Testers for a workshop or shop – customers can try a fragrance or toner without opening a large pack.
• Sprays with essential oils – if the oil components are solubilised in the water or alcohol phase, the sprayer disperses them without clogging.

Filling and volume

The nominal volume is the quantity the bottle is designed for under normal filling. The brimful capacity is the physical volume up to the neck. The difference provides room for the sprayer’s dip tube and for the expansion of the contents when the temperature changes. Fill to the nominal volume, not to the brim, otherwise the liquid will overflow through the neck when you screw on the sprayer.

Sprayer and dispensing

One press releases approximately 0.14 ml, which for a full bottle corresponds to roughly one hundred doses. A dose this small creates only a light layer on skin, hair or clothing without soaking the surface. The sprayer is made of polypropylene, which tolerates common water-based and alcohol-based contents. For formulations with a higher proportion of essential oils or solvents, we recommend testing how the plastic behaves on a single piece before a larger production run.

The dip tube is supplied longer than the height of the bottle. After screwing on the sprayer, trim it with a diagonal cut so that it touches the bottom without bending. A bent dip tube draws in air and the spray starts to sputter.

Good to know

The glass medicine bottle withstands repeated filling if you clean it thoroughly between fills and let it dry. The sprayer is the weaker part with repeated use. An odour remains in it after fragrance blends, so it is better to replace it between different fragrances. For recycling, separate the glass and the plastic: the bottle goes with glass, the sprayer with plastics.

If you combine it with a different closure, choose according to the neck finish given in the parameters. You will find other closures with the same neck finish and ready-made sets in the Handymade range. For a custom combination, we recommend checking the seal and dispensing with your specific formulation.

Frequently asked questions