+421 950 333 113info@handymade.storeHandymade Days: −10 % on all ready-made productsShop now

GLASS BOTTLES 30 ml

Clear Frosted Glass Bottle, Black Fine Mist Sprayer, Black Overcap, 30 ml

Pack size15 ml30 ml50 ml

The 30 ml glass bottle with a black fine mist sprayer is a ready-made combination of bottle and closure for liquid cosmetic products that are applied by spraying: facial toners, hydrosols, refreshing mists or hair… full description

AvailabilityIn stock · 7 pcs
Product codeO18SN030-OVR18PC3
€0.79incl. VAT

Lowest price in the last 30 days: €0.79

Save €0.05 with this set

Volume pricing
1–263 pcs€0.79Your price
264–1055 pcs€0.77−3 % · 1× plato
1056–5015 pcs€0.71−10 % · 4× plato
from 5016 pcs€0.63−20 % · 19× plato

Total for 1 pcs: €0.79

Quantities add up across all combinations of this bottle.

Product description

The 30 ml glass bottle with a black fine mist sprayer is a ready-made combination of bottle and closure for liquid cosmetic products that are applied by spraying: facial toners, hydrosols, refreshing mists or hair sprays in a small size for travel or samples. The sprayer releases the contents evenly in a fine mist, so the product can be applied to the face, hair and larger areas of skin without spilling.

The bottle is made of frosted glass. The matte surface softens direct light while the contents remain visible as a silhouette, so you can see how much product is left. The glass does not absorb fragrances and does not stain, which makes it suitable for hydrosols and toners with essential oils as well. The black sprayer top matches the frosted glass, and the set looks uniform without any further finishing.


What the set is suitable for

  • Facial toners and hydrosols – applying them as a mist is natural for water-based products, it does not require cotton pads and the dose is easy to control.
  • Refreshing and setting mists – light water-based or water-and-glycerine sprays for the face, for skin after sun exposure or for setting make-up.
  • Hair sprays – conditioning or refreshing low-viscosity sprays for hair and scalp.
  • Samples and travel sizes – a volume of 30 ml is enough for several weeks of regular toner use, and the bottle takes up minimal space in a small bag.
  • Recipe testing – the small volume suits first batches, where you are still adjusting the fragrance, pH or concentration of active ingredients.

How the sprayer dispenses

The sprayer works as a pump with a dip tube that draws the contents from the bottom of the bottle. One press releases approximately 0.14 ml, which is a fine dose of mist for the face or the palm. A fully filled bottle therefore delivers roughly two hundred doses. The actual amount varies slightly depending on the viscosity of the product and the force of the press.

The sprayer disperses only thin, watery liquids well. Thicker emulsions, gels or pure vegetable oils either do not get through the nozzle or come out as a stream instead of a mist, and the mechanism quickly becomes clogged. For formulations with an oil component, keep it at a low percentage and solubilise it in the water phase beforehand.

The sprayer dip tube is supplied longer than the height of the bottle. Before first use, shorten it with a diagonal cut so that it reaches just above the bottom. The sprayer then draws the contents right down to the last doses and the tube does not kink in the neck.


Nominal and total volume

The nominal volume of 30 ml is the volume the bottle is designed for in normal filling. The total brimful volume given in the parameters is the physical volume up to the neck. The difference between them is a reserve for the dip tube and the body of the sprayer, which push part of the liquid upwards when screwed in. The bottle should therefore be filled to the nominal volume. If you fill it to the brim, the product will overflow through the neck when the sprayer is fitted and the thread will become sticky.


Good to know

The set is declared as suitable for contact with cosmetic products. It is not approved for contact with food, so it is not suitable for filling with edible oils, vinegars or herbal infusions intended for consumption.

Before first filling, wash the bottle in warm water with washing-up liquid, rinse it thoroughly and disinfect it with isopropyl alcohol or ethanol. Rinse the sprayer by pumping clean water through it several times and then the alcohol, and leave both parts to dry completely. Residual water in the tube would dilute the first doses.

The bottle can be used repeatedly. When changing the contents, replace the sprayer as well or pump it through very thoroughly, because the remains of the previous product and its fragrance stay in the tube and nozzle. For contents with a higher proportion of alcohol or essential oils, we recommend checking how the plastic parts of the sprayer behave with your specific formulation, especially the tightness of the thread and the quality of the mist after several weeks.

Glass does not tolerate sudden temperature changes well. Do not pour a hot solution into a cold bottle and do not leave a filled bottle at freezing temperatures, as the expanding contents may crack the glass.

Both the glass and the polypropylene sprayer are recyclable. For disposal, simply separate them and sort each according to its material.

Closures with the same neck type as stated in the bottle parameters, and other ready-made combinations, can be found in the Handymade range. For your own combination, we recommend checking the tightness, dispensing and behaviour of the packaging with your specific formulation.


Frequently asked questions

Does frosted glass protect the contents from light?
Partially. The matte frosted surface scatters and softens direct light, but it does not provide the shielding of amber or blue glass. It is sufficient for hydrosols and toners used in everyday routines. Products with light-sensitive ingredients are better filled into dark glass, or the bottle should be kept out of direct sunlight.
Can the 30 ml glass bottle with sprayer be used for an oil spray?
Not for pure oil. The sprayer is designed for watery liquids, and pure vegetable oil will not be dispersed through the nozzle but will rather run out in a stream or clog the mechanism. An oil component in a spray works only when it is at a low percentage and solubilised in the water phase. For pure oils, choose a bottle with a dropper or a pump.
How many doses does a 30 ml bottle with sprayer deliver?
Roughly two hundred presses. One sprayer dose is approximately 0.14 ml, and when filled to the nominal volume of 30 ml this corresponds to about two hundred doses. The actual number depends on the viscosity of the product, the force of the press and whether the tube reaches the bottom of the bottle.
How do I clean the sprayer before the next use?
By pumping it through. Place the tube in warm water with washing-up liquid and press several times until the water comes out clear, then pump alcohol through in the same way and leave the mechanism to dry with the tube pointing downwards. If there is a strong fragrance or residue of essential oils, it is more reliable to replace the sprayer with a new one, because the plastic in the nozzle retains the fragrance.
Is the glass bottle with sprayer suitable for food?
No. The set is not approved for contact with food and is declared only for use with cosmetic products. For edible oils, vinegars or syrups, choose packaging whose suitability for contact with food is stated in the parameters.

Parameters

Clear frosted glass bottle, 18 mm, 30 ml

Product colour
Frosted
Country of origin
China
Nominal capacity
30
Brimful capacity
35 ml
Diameter
33 mm
Thread type
18/410
Height
78,8 mm
Product material
Glass

Plastic fine mist sprayer, 18/415, black top, 115 mm

Product colour
Black
Country of origin
China
Diameter
22,3 mm
Thread type
18/415
Height
40,01 mm
Tube length
115 mm
Dose
0,14 ml

Product documentation

PDSProduct Data Sheet
Clear frosted glass bottle, 18 mm, 30 ml · O18SN030PDF ↓
Plastic fine mist sprayer, 18/415, black top, 115 mm · OVR18PC3PDF ↓
DrawingTechnical drawing
Clear frosted glass bottle, 18 mm, 30 ml · O18SN030PDF ↓
Plastic fine mist sprayer, 18/415, black top, 115 mm · OVR18PC3PDF ↓
Download all (ZIP)

4 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.