+421 950 333 113info@handymade.storeHandymade Days: −10 % on all ready-made productsShop now

GLASS BOTTLES 50 ml

Clear Glass Bottle, Glossy Gold Black Pump With Clear Overcap, 50 ml

Pack size10 ml12 ml15 ml30 ml50 ml100 ml

This clear glass bottle with a 50 ml volume and a glossy black and gold plastic pump with a clear overcap is intended for cosmetics that you want to dispense in small amounts without unscrewing the closure. full description

AvailabilityIn stock · 3366 pcs
Product codeO18SP050-OVD18PZCL2
€1.36incl. VAT

Lowest price in the last 30 days: €1.36

Volume pricing
1–199 pcs€1.36Your price
200–999 pcs€1.25−8 %
1000–4999 pcs€1.18−13 %
from 5000 pcs€1.06−22 %

Total for 1 pcs: €1.36

Quantities add up across all combinations of this bottle.

Product description

This clear glass bottle with a 50 ml volume and a glossy black and gold plastic pump with a clear overcap is intended for cosmetics that you want to dispense in small amounts without unscrewing the closure. Clear glass shows the colour and clarity of the contents, so it is particularly suitable for serums, face and body oils, light emulsions and lotions of liquid to medium-thick consistency. One press of the pump dispenses approximately 0.3 ml, which for serums and oils corresponds to a typical single dose for the face. The set is declared suitable for contact with cosmetics.


What it is suitable for

  • Face and oil serums – a small dose per press corresponds to the amount needed for the face, and the contents do not touch your fingers during use.
  • Face and body oils – the pump draws up liquid oils smoothly, and the clear glass shows their colour.
  • Light emulsions and lotions – products with a thinner consistency are dispensed cleanly and precisely.
  • Samples and travel sizes – a volume of 50 ml is enough for testing formulations, and the clear overcap protects the pump head from dust and from accidental pressing in a bag.
  • Gift and display packaging – the glossy black and gold pump combined with clear glass looks complete on a shelf without any further decoration.

Nominal and brimful volume

The nominal volume of 50 ml is the amount the bottle is designed to hold when filled normally. The brimful volume is the physical volume up to the neck. The difference between them leaves room for the dip tube and the pump body, which raise the liquid level once screwed on, and for the expansion of the contents when the temperature changes. The bottle is therefore filled to the nominal volume.

Before filling a larger batch, fill one bottle, screw on the pump and check that the contents do not overflow through the neck and that the pump dispenses evenly after several presses. If the dip tube extends past the bottom and bends, shorten it with a diagonal cut so that it ends just above the bottom.


How the pump works with the contents

The pump draws up the contents through a dip tube from the bottom, so it works best with contents that flow freely. It dispenses oils, lower-viscosity gel serums and liquid emulsions cleanly. It may not draw up thicker creams or balms at all, or may dispense them unevenly. We recommend testing the suitability of a specific formulation in the finished packaging, especially for emulsions that thicken after cooling.

The clear overcap fits over the pump head. It protects the head from dirt and prevents accidental pressing during transport. When you use the product, remove the overcap, press the head and the contents come out through the pump nozzle. The contents therefore stay in the bottle without direct contact with your hands, which you will appreciate especially with serums and emulsions containing a water phase.


Good to know

Clear glass does not protect the contents from light. For formulations with essential oils, vitamin C, retinoids or vegetable oils sensitive to oxidation, we therefore recommend storing them in the dark or in a box and using them within a shorter time. Amber or blue glass is usually chosen for such formulations.

Glass does not absorb fragrances or dyes and withstands essential oils and alcohol-based contents without any change to the material. The pump is made of polypropylene and aluminium. For formulations with a high proportion of essential oils or solvents, we recommend checking whether the plastic parts of the pump keep sealing over the long term and do not change in appearance.

Before the first filling, wash the bottle, rinse it with isopropyl alcohol or ethanol and let it dry completely. Rinse the pump with clean water by pressing it several times and let it dry as well, so that no water remains in the tube to dilute the first dose. After thorough washing, the bottle can be reused. We recommend replacing the pump when you change the formulation, because residues of the contents in the mechanism are difficult to remove.

Only the glass bottle on its own has a certificate for direct contact with food. The pump does not have one, so the set as a whole is intended for cosmetics. For homemade oils or syrups, use a bottle with a closure that has a food contact certificate.

The bottle on its own can also be combined with other closures with the same neck type. You can find ready-made bottle + closure combinations in the Handymade range. If you make your own combination, we recommend checking the seal and the dispensing with your specific formulation. After use, glass goes into glass recycling, and the pump is unscrewed and sorted separately.


Frequently asked questions

What is a 50 ml glass bottle with a pump suitable for?
A 50 ml glass bottle with a pump is suitable for liquid and medium-thick cosmetic products: serums, face and body oils, light emulsions and lotions. The pump draws up the contents through a dip tube from the bottom, so the contents must flow freely. Thick creams and balms may be dispensed unevenly or not at all, so we recommend testing their suitability in the finished formulation.
Does a clear glass bottle protect the contents from light?
No, a clear glass bottle lets light through. Store formulations sensitive to light and oxidation, for example those with vitamin C, retinoids or essential oils, in the dark or in a box, or choose amber or blue glass for them. Clear glass is worthwhile where the customer should see the colour and clarity of the contents, for example with coloured oils or serums.
How much does the pump on a 50 ml glass bottle dispense per press?
One full press of the pump dispenses approximately 0.3 ml. For serums and oils this corresponds to a typical single dose for the face, while for body products you will use several presses. The first doses after filling are usually smaller until the tube and the mechanism fill with the contents, so press the pump several times before first use.
Can a 50 ml glass bottle with a pump be used for food?
No, a 50 ml glass bottle with a pump is intended for cosmetics as a set. Only the glass bottle on its own has a certificate for direct contact with food, and the plastic pump does not have one. If you want to use the bottle for homemade oils, syrups or herbal infusions, combine it with a closure that has a food contact certificate.
How much should I fill into a 50 ml glass bottle with a pump?
A 50 ml glass bottle with a pump is filled with 50 ml, that is the nominal volume, not the brimful volume. The brimful volume is larger, and the difference leaves room for the dip tube and the pump body, which raise the liquid level once screwed on, and for the expansion of the contents when the temperature changes. If the bottle is overfilled, the contents may overflow through the neck when you close it.
How do I prepare a glass bottle with a pump before filling, and can it be reused?
Before the first filling, wash the glass bottle, rinse it with isopropyl alcohol or ethanol and let it dry. Rinse the pump with clean water by pressing it several times and dry it as well. After thorough washing, the bottle can be filled repeatedly. We recommend replacing the pump when you change the formulation, because residues of the previous contents in the mechanism are difficult to remove and could spoil the new filling.

Parameters

Clear glass bottle, 18 mm, 50 ml

Product colour
Clear
Country of origin
European Union
Nominal capacity
50
Brimful capacity
61 ml
Diameter
39 mm
Thread type
18/410
Height
92,9 mm
Product material
Glass

Plastic pump dispenser, 18/415, glossy black and gold, clear top

Product colour
BlackGold
Country of origin
European Union
Diameter
25 mm
Thread type
18/415
Height
46 mm
Tube length
100 mm
Product material
AluminiumPPPlastic
Dose
0,3 ml

Product documentation

PPWRPackaging Declaration (PPWR)
Clear glass bottle, 18 mm, 50 ml · O18SP050PDF ↓
Plastic pump dispenser, 18/415, glossy black and gold, clear top · OVD18PZCL2PDF ↓
PDSProduct Data Sheet
Clear glass bottle, 18 mm, 50 ml · O18SP050PDF ↓
Plastic pump dispenser, 18/415, glossy black and gold, clear top · OVD18PZCL2PDF ↓
DrawingTechnical drawing
Clear glass bottle, 18 mm, 50 ml · O18SP050PDF ↓
Download all (ZIP)

5 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.