Spend over €100 for discounted shipping!

+421 950 333 113info@handymade.store

GLASS BOTTLES 100 ml

Clear Glass Bottle, Glossy Gold Black Pump With Clear Overcap, 100 ml

Pack size10 ml12 ml15 ml30 ml50 ml100 ml

The glass bottle with pump combines a clear glass medicine bottle with a volume of 100 ml and a plastic pump in a glossy black and gold finish with a clear overcap. full description

AvailabilityIn stock · 1926 pcs
Product codeO18SP100-OVD18PZCL2
€1.51incl. VAT

Lowest price in the last 30 days: €1.51

Volume pricing
1–199 pcs€1.51Your price
200–999 pcs€1.38−8 %
1000–4999 pcs€1.32−13 %
from 5000 pcs€1.19−21 %

Total for 1 pcs: €1.51

Quantities add up across all combinations of this bottle.

Product description

The glass bottle with pump combines a clear glass medicine bottle with a volume of 100 ml and a plastic pump in a glossy black and gold finish with a clear overcap. The set is intended for cosmetic products that are dispensed in small amounts and should not come into contact with fingers: facial serums, face and body oils, light emulsions or liquid cleansing products. The clear glass shows the colour and clarity of the contents, and the pump dispenses roughly the same amount with each press, so the product is easy to apply and is not wasted.


What it is good for

  • Facial serums and fluids – one press dispenses approximately 0.3 ml, so you set the dose by the number of presses.
  • Face and body oils – the pump dispenses the oil precisely and without dripping down the neck.
  • Light emulsions and liquid milks – thinner creamy textures pass through the tube and the valve.
  • Cleansing gels and cleansing oils – one-handed dispensing is handy at the sink when your other hand is wet.
  • Massage and hair oils – the clear bottle shows the remaining amount and the pump prevents spilling if the bottle is tipped over.

How the set works

The pump screws directly onto the neck of the medicine bottle, and the tube reaches almost to the bottom and draws up the contents down to the last millilitres. The clear overcap protects the pump opening from dust during storage and transport and is removed before use. The pump body is made of polypropylene and aluminium, and the glossy black and gold surface looks striking on a shelf even at a small volume.

When using it for the first time, prime the pump by pressing it several times until the tube fills and starts to dispense the product. The set is sold as a matched pair, and the pump is matched to the neck of this medicine bottle. You can find other closures with the same neck type and other ready-made combinations in the Handymade range. If you make your own combination, we recommend checking the seal and dispensing with your specific formulation.


Good to know

Nominal volume is the volume the medicine bottle is designed for in normal filling. The total volume to the brim is the physical volume up to the neck. The difference between them forms a reserve for the tube and valve of the pump and for possible expansion of the contents with a change in temperature. Therefore, fill the bottle up to the nominal volume, not to the brim.

Insert the pump tube into the filled medicine bottle slowly and at an angle, so that the displaced air escapes without the contents splashing out. With thicker creams and products with particles, test beforehand whether the pump dispenses them evenly.

Clear glass does not provide light protection. Store formulations with essential oils, vitamin C, retinoids or oils prone to oxidation out of direct sunlight. If they are to stand in the light for longer, choose amber or blue glass instead.

The glass bottle on its own has a certificate for direct contact with food. The set with pump as a whole is intended for cosmetics.

Before the first filling, wash the medicine bottle, disinfect it with isopropyl alcohol or ethanol and let it dry completely. Rinse the pump with clean water or alcohol and dry it well so that no water remains in the tube. The glass withstands repeated use; repeat the cleaning procedure before each refill. The glass bottle belongs in glass recycling; the pump is a combination of plastic and aluminium and is separated from the medicine bottle before disposal. The packaging material of both components is declared suitable for use with cosmetic products; you can find the declarations of conformity with the product.


Frequently asked questions

How much product does the pump on the 100 ml glass bottle dispense per press?
The pump on this bottle dispenses approximately 0.3 ml of product per full press. The actual amount depends on the viscosity of the contents and on whether you press the pump fully. With serums and oils you set the dose with one to several presses; with body products the number of presses increases accordingly.
Is the clear glass bottle with pump suitable for oils?
Yes, the bottle with pump is suitable for face, body and massage oils. Glass does not react with oils, and the pump dispenses the oil without dripping. However, clear glass does not protect against light, so store oils prone to oxidation, such as rosehip or linseed oil, out of direct sunlight or choose dark glass.
Can the 100 ml glass bottle with pump be reused?
Yes, both the medicine bottle and the pump can be reused. It is enough to wash the glass, disinfect it with alcohol and let it dry. Rinse the pump with warm water or alcohol, press it empty several times and dry it well so that no water or residue of the previous product remains in the tube.
Why should the glass bottle with pump not be filled to the brim?
The bottle is filled up to the nominal volume of 100 ml because the reserve above it is taken up by the tube and valve of the pump. If it were filled to the brim, part of the contents would be pushed out when the pump is screwed on, and the contents would have nowhere to expand with a change in temperature. The reserve also allows the pump to draw up product correctly.
Is the glass bottle with pump set suitable for food?
The set as a whole is not intended for food. The glass bottle on its own has a certificate for direct contact with food, while the plastic pump does not have such a declaration. The set with pump is therefore declared for use with cosmetic products, such as serums, oils and light emulsions.
Does the pump on the glass bottle also dispense thicker creams?
The pump is designed for thinner textures, that is serums, oils, fluids and liquid milks. With thicker creams the dose may be smaller or uneven, and products with scrub particles may block the valve. We recommend testing the behaviour of your specific formulation beforehand on a small amount.

Parameters

Glass bottle, vial, clear 100 ml

Product colour
Clear
Country of origin
European Union
Nominal capacity
100
Brimful capacity
108 ml
Diameter
45 mm
Thread type
18/410
Height
116,2 mm
Product material
Glass

Plastic pump dispenser, 18/415, glossy black and gold, clear top

Product colour
BlackGold
Country of origin
European Union
Diameter
25 mm
Thread type
18/415
Height
46 mm
Tube length
100 mm
Product material
AluminiumPPPlastic
Dose
0,3 ml

Product documentation

PPWRPackaging Declaration (PPWR)
Glass bottle, vial, clear 100 ml · O18SP100PDF ↓
Plastic pump dispenser, 18/415, glossy black and gold, clear top · OVD18PZCL2PDF ↓
PDSProduct Data Sheet
Glass bottle, vial, clear 100 ml · O18SP100PDF ↓
Plastic pump dispenser, 18/415, glossy black and gold, clear top · OVD18PZCL2PDF ↓
Download all (ZIP)

4 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.