Spend over €100 for discounted shipping!

+421 950 333 113info@handymade.store

GLASS BOTTLES 15 ml

Clear Glass Bottle, Glossy Gold Black Pump With Clear Overcap, 15 ml

Pack size10 ml12 ml15 ml30 ml50 ml100 ml

Clear glass bottle with pump, 15 ml A small clear bottle with a pump for liquid and semi-liquid products that you want to dispense without touching them with your fingers . full description

AvailabilityIn stock · 3799 pcs
Product codeO18SP015-OVD18PZCL2
€1.19incl. VAT

Lowest price in the last 30 days: €1.19

Volume pricing
1–199 pcs€1.19Your price
200–999 pcs€1.09−8 %
1000–4999 pcs€1.03−14 %
from 5000 pcs€0.92−23 %

Total for 1 pcs: €1.19

Quantities add up across all combinations of this bottle.

Product description

Clear glass bottle with pump, 15 ml

A small clear bottle with a pump for liquid and semi-liquid products that you want to dispense without touching them with your fingers. The clear glass shows the colour and the level of the contents, while the glossy black and gold pump with a clear overcap gives a small pack the look of a finished retail product. The 15 ml volume is enough for an eye or face serum, a light emulsion, a facial oil or a sample of a larger product that you hand to a customer.

The set consists of a glass bottle and a pump with a dip tube. Both parts are declared as suitable for contact with cosmetic products, and the declaration of conformity is available with the product.


What it is suitable for

  • Serums and concentrates – water-based and oil-based serums with lower viscosity pass through the pump without difficulty.
  • Eye and face emulsions – light creams and lotions that are pourable at room temperature. The pump cannot draw up thicker creams and balms, so stick with a jar for those.
  • Facial and hair oils – one press delivers a measured dose, and the oil does not run down the neck as it does when poured.
  • Samples and travel packs – the small volume and closed cap suit a cosmetic bag or serve as a tester alongside a larger product.

Use and filling

Before first use, wash the bottle, rinse it with isopropyl alcohol or ethanol and leave it to dry completely. Rinse the pump in the same way and pump it empty several times so that any remaining cleaning liquid runs out of the tube. Do not fill the glass with hot contents and do not move it from the cold straight into warm water, as a sudden change in temperature may crack it.

Fill it to the nominal volume of 15 ml, not to the brim. The brimful capacity given in the parameters is the physical volume of the bottle up to the neck. The difference between the two values is a reserve for the dip tube and the pump body, which take up part of the space when screwed in.

After filling, screw on the pump and pump it until the tube fills and the first dose comes out. With oils and thicker emulsions this may take several presses.

The pump delivers approximately 0.3 ml per press. Take this into account when formulating, for example with serums containing a higher dose of an active ingredient, where the recommended amount per application corresponds to one or two presses.


Good to know

Clear glass does not protect the contents from light. Store products containing light-sensitive ingredients, such as vitamin C, retinol or unrefined oils prone to oxidation, in a box or in the dark, or choose amber or blue glass for them.

The pump is made of polypropylene with an aluminium element. For products with a higher proportion of alcohol, concentrated essential oils or solvents, check before larger-scale production how it seals and dispenses with your specific formulation over the long term. Also test whether it copes with the viscosity of your emulsion, as the limit varies with the recipe.

The set is not approved for contact with food. Use it only for cosmetic products, not for homemade oils, syrups or infusions.

After thorough washing and disinfection, the bottle can be reused. The pump is harder to clean, as the tube and valve retain residue of the previous contents, so it is better to replace it when you change the product. For recycling, glass goes with glass, while the plastic and aluminium pump is disposed of separately from the bottle.


Frequently asked questions

Is the 15 ml glass bottle with pump suitable for facial oil?
Yes, the pump draws up facial oils and delivers a measured dose without leaking. Before filling a larger batch, check how quickly the tube fills with your oil and whether the pump seals properly. With oils sensitive to oxidation, keep in mind that clear glass does not protect them from light.
Can a cream be dispensed through the pump?
Only a thin, flowing cream or a face lotion. A thick cream with a higher content of wax or butter will not be drawn up by the pump, or the tube will clog. If you want to dispense a cream by pumping, adjust the viscosity at the formulation stage and test the behaviour in this specific pump.
Does a clear bottle protect the contents from light?
No, clear glass lets light through and does not protect the contents from it. It is suitable for products that are not light-sensitive, or for products sold in a box and stored in the dark. For serums with vitamin C, retinol or oils prone to oxidation, choose amber or blue glass.
How much actually fits into the 15 ml bottle with pump?
It is filled with 15 ml, which is the nominal volume. The bottle has a slightly larger physical volume up to the brim, which is given in the parameters. The remaining space is taken up by the dip tube and the pump body once screwed in. If you filled it to the brim, the contents would be pushed out when the pump is fitted.
How do I prepare the bottle with pump before filling?
Wash the bottle, rinse it with isopropyl alcohol or ethanol and leave it to dry completely. Rinse the pump in the same way and pump it empty until the remaining liquid runs out of the tube. Fill anhydrous and oil-based products only into a completely dry bottle.
Is the bottle with pump set suitable for food?
No, the set is not approved for contact with food. Both the glass bottle and the pump are declared as suitable for contact with cosmetic products, that is, for serums, oils, emulsions and similar preparations. For homemade food oils, syrups or infusions, choose packaging with a certificate for food contact.

Parameters

Clear glass bottle, 18 mm, 15 ml

Product colour
Clear
Country of origin
China
Nominal capacity
15
Brimful capacity
18 ml
Diameter
28,5 mm
Thread type
18/410
Height
64 mm
Product material
Glass

Plastic pump dispenser, 18/415, glossy black and gold, clear top

Product colour
BlackGold
Country of origin
European Union
Diameter
25 mm
Thread type
18/415
Height
46 mm
Tube length
100 mm
Product material
AluminiumPPPlastic
Dose
0,3 ml

Product documentation

PPWRPackaging Declaration (PPWR)
Plastic pump dispenser, 18/415, glossy black and gold, clear top · OVD18PZCL2PDF ↓
PDSProduct Data Sheet
Clear glass bottle, 18 mm, 15 ml · O18SP015PDF ↓
Plastic pump dispenser, 18/415, glossy black and gold, clear top · OVD18PZCL2PDF ↓
DrawingTechnical drawing
Clear glass bottle, 18 mm, 15 ml · O18SP015PDF ↓
Download all (ZIP)

4 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.