PLASTIC BOTTLES
Clear Plastic Bottle, Black Fine Mist Sprayer, Black Overcap, 100 ml
The plastic bottle set with a fine mist sprayer is designed for cosmetic products that are applied to the skin or hair in fine droplets. full description
Lowest price in the last 30 days: €0.70
Total for 1 pcs: €0.70
Quantities add up across all combinations of this bottle.
Add 99 more pcs and the price drops to €0.67/pc.
Product description
The plastic bottle set with a fine mist sprayer is designed for cosmetic products that are applied to the skin or hair in fine droplets. The clear PET bottle with a nominal volume of 100 ml is light and unbreakable, so it suits a handbag, travel and the bathroom, where glass would be an unnecessary risk. You can see the contents through the walls, and how much is left. The black sprayer with a black overcap contrasts strongly with the clear bottle and dispenses the contents without you having to open the bottle.
This combination is most often filled with facial toners and hydrosols, refreshing face mists, detangling hair sprays, alcohol-based body and room fragrances, or thin hair serums. The set as a whole is declared suitable for contact with cosmetics. The bottle on its own is also certified for direct contact with food, but the sprayer is not, so the set is intended for cosmetics.
How to use the set
The sprayer screws onto the neck of the bottle and the tube reaches almost to the bottom, so you can use up the contents down to the last doses. When using it for the first time, press it several times without product until the tube fills and an even dose starts to come out. One press releases approximately 0.14 ml, which is enough to lightly cover the face or a strand of hair without dripping.
The sprayer is designed for thin liquids with the consistency of water or alcohol. Thicker contents, gels and pure oils disperse poorly through the nozzle, coming out in a stream instead of a mist, or blocking the nozzle. For a formulation with a low proportion of oil or with solubilised essential oils, we recommend checking that the sprayer works properly on a test batch.
Nominal and total volume
The nominal volume is the amount the bottle is designed for under normal filling. The total brimful volume is larger because it includes the space up to the neck. This difference serves as a reserve for the sprayer tube and for the expansion of the contents when the temperature changes. A 100 ml recipe therefore fits into this bottle, closure included, without overflowing.
Fill the bottle only up to the nominal volume. There must be space left above the liquid for the tube and air, otherwise the contents will be pushed out through the neck when you screw on the sprayer.
Good to know
- Before the first filling – rinse the bottle and the sprayer, disinfect them with isopropyl alcohol or ethanol and let them dry completely. Residual water would dilute the contents and increase the risk of microbial contamination.
- Light – clear PET does not protect against light. Store products containing light-sensitive ingredients away from direct sunlight, or choose dark glass.
- Heat – store the empty bottle at 5–30 °C. Let contents prepared while hot cool down before filling, and do not leave the bottle in a hot car or on a radiator.
- Essential oils and solvents – concentrated essential oils, pure solvents and aggressive chemicals do not belong in PET or PP. For an unusual formulation, test how the packaging behaves on a single piece.
- Preservation – water-based and hydrosol-based contents need a preservative just as in any other packaging. The sprayer limits contact with fingers, not access of air.
- Reuse – once empty, the set can be washed, disinfected and refilled. Rinse the sprayer with clean water and press it several times without product to flush the residues out of the tube and nozzle.
- Recycling – the bottle is made of PET and the sprayer of PP; separate them before disposal and sort them as plastic.
After screwing on the sprayer, check that it is tight by turning the bottle upside down. For travel, put the bottle in a pouch or bag as well.
Other closures with the same neck type can also be used on the bottle, and Handymade offers ready-made bottle and closure combinations separately. If you make your own combination, we recommend checking the tightness, the dispensing and the behaviour of the packaging with your specific formulation.
Frequently asked questions
Parameters
Clear plastic bottle, 100 ml
- Product colour
- Clear
- Country of origin
- European Union
- Nominal capacity
- 100
- Diameter
- 38 mm
- Thread type
- G18x3
- Height
- 122 mm
Plastic fine mist sprayer, 18/415, black top, 115 mm
Product documentation
- PPWRPackaging Declaration (PPWR)
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.






































































