GLASS BOTTLES 15 ml
Blue Glass Bottle, Oil Pump, 15 ml
Pack size10 ml15 ml30 ml50 ml100 ml
A blue glass bottle with a treatment pump is intended for small quantities of facial and body oils, oil serums and blends that are applied in drops and need to be dispensed precisely, without dipping fingers into the… full description
Lowest price in the last 30 days: €1.52
Total for 1 pcs: €1.52
Quantities add up across all combinations of this bottle.
Product description
A blue glass bottle with a treatment pump is intended for small quantities of facial and body oils, oil serums and blends that are applied in drops and need to be dispensed precisely, without dipping fingers into the contents. Blue glass filters out some of the light, the pump dispenses the same amount with every press, and the clear overcap protects the pump head from dust and from being pressed accidentally in a bag. The 15 ml volume suits facial oils, cuticle oils, beard oils, travel sizes and customer samples.
What the set consists of
- Glass bottle, medicine bottle – blue glass with a standard neck type and a narrow opening, into which the pump tube fits without play.
- Treatment pump – black plastic pump with a tube, one press dispenses approximately 0.18 ml. This corresponds to a few drops, which, for facial oils, is enough for a single application to the face or cuticles.
- Clear overcap – polystyrene cover that fits over the pump head. Through the clear plastic you can see the pump head and any oil residue, so it can be wiped off in time.
What it is suitable for
The pump is designed for liquid oils and oil serums with a lower viscosity: jojoba, almond, grape seed and apricot kernel oil, squalane or their blends with vitamin E. It also works well for oil treatments for hair ends and beards, where the user needs the same small dose every time. For thicker oils, such as undiluted castor oil, we recommend checking beforehand that the pump draws them up and dispenses them smoothly. Balms, butters and emulsions with a creamy consistency cannot be dispensed with this type of pump.
Aqueous solutions, toners and alcohol-based tinctures are not suitable. The pump is designed for oils, and with any other type of content you need to check the tightness and the behaviour of the plastic parts with the specific formulation.
Nominal and total volume
The nominal volume is the quantity the bottle is intended for under normal filling. The total brim volume given in the parameters is the physical volume of the glass up to the neck. The space between the two remains free for the tube and the pump head. Fill the bottle to the nominal volume, not to the brim. If it is overfilled, oil leaks out when the pump is screwed in and some of it remains in the thread.
Preparation and filling
Before the first filling, wash the bottle, disinfect it with isopropyl alcohol or ethanol and let it dry completely. Residual water in the oil promotes the growth of microorganisms and spoils the appearance of the product. The pump tube is longer than the bottle, so shorten it with a sharp knife before first use so that it reaches just above the bottom. Then fill the bottle, screw on the pump and use the first presses to draw the oil into the tube.
Fill oils through a small funnel or a syringe so that they do not get into the thread. Oil in the thread will in time glue the pump to the neck and make repeated opening difficult.
Good to know
- Contact with cosmetics – the treatment pump and the clear overcap have a declaration of suitability for use with cosmetic products, the glass bottle itself does not. The set as a whole is therefore not declared as suitable for contact with cosmetics. The documents for the individual components are available with the product listing.
- Essential oils and alcohol – the polystyrene overcap does not come into contact with the contents. For oil blends with a higher proportion of essential oils or with added alcohol, we recommend checking the behaviour of the pump over time, as plastics react differently to such substances.
- Reuse – after emptying, the bottle and the pump can be taken apart, rinsed with warm water and washing-up liquid, flushed by pumping clean water through the tube and left to dry. The pump retains oil residue longer than the glass, so when switching to a different oil, allow for more thorough rinsing.
- Glass and heat – do not pour hot oil into a cold bottle, as a sudden change in temperature damages the glass. After heating, let oils cool to at least room temperature.
- Other closures – the bottle has a standard neck type given in the parameters. Closures with the same neck and ready-made combinations of packaging and closure can be found in the Handymade range. For your own combination, we recommend checking the tightness and dispensing with the specific formulation.
- Recycling – the glass bottle belongs in glass recycling, while the pump and the overcap should be placed separately with plastics.
The pump does not replace a tight closure. For travel, put the overcap on and transport the bottle upright, ideally in a resealable bag.
Frequently asked questions
Parameters
Glass bottle, vial, blue, 18 mm, 15 ml
Black Plastic Oil Pump, 18 mm
Clear Plastic Cap for Oil Pump, 18/410
Product documentation
- DrawingTechnical drawing
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.





















































































