Yes, the packaging can be used repeatedly if hygienic principles are followed. Before each new filling, we recommend thoroughly cleaning and disinfecting the bottle and the spray dispenser in order to minimise the risk of microbial contamination and any impact on the stability of the new fill. For disinfection you can use, for example, isopropyl alcohol IPA 99 % isopropyl alkohol or plant-based ethanol Etanol 96 % denaturovaný rastlinný. After cleaning, allow all parts to dry completely and only then refill the packaging.

The packaging is ideal for liquid formulations that are to be applied as a fine mist or spray. Most commonly these are facial and body sprays, toners, floral waters, hair sprays, aromatherapeutic and refreshing blends, or disinfecting and cleaning solutions. It is always important to test whether the viscosity and composition of the specific product allow smooth spraying without clogging the system.

It is advisable to check the spray dispenser regularly and, if necessary, rinse it with clean water or an appropriate solvent according to the type of product residue. It is recommended to avoid mixtures that are too thick or highly viscous, as these can cause clogging. During long-term storage it is practical to secure the mechanism with a protective cap and store the bottle in an upright position to prevent unwanted leakage of liquid and to prolong the service life of the sealing.

If you decide not to reuse the packaging, we recommend recycling it in accordance with local waste-sorting rules and the information given in the product parameters. After emptying, the glass bottle should be rinsed and placed in the glass recycling container. The plastic parts of the spray dispenser usually belong in sorted plastic waste, or in mixed waste if the material designation does not allow standard recycling. Before disposal, it is always advisable to check the recommended sorting according to the labelling on the packaging and local regulations.

To select a suitable packaging, you can use the advanced filter located at the top of the page after clicking on the relevant packaging category. In the advanced filter you can clearly narrow down the offer according to several parameters such as type and neck diameter, size, colour or material. This allows you to quickly find bottles, vials, jars or containers that will best match the properties of your product and the desired dosing method.

Before the final use of the packaging we always recommend carrying out a trial filling in a smaller quantity. Observe whether the glass material or the plastic parts of the spray dispenser change the colour, fragrance or consistency of the product and whether there is any release of material or leakage. At the same time, test the spraying performance over several days – uniformity of the mist, return of the spring and comfort of application. Such a test will help you prevent problems during long-term use of the finished product.