Before first filling, we recommend mechanically cleaning the bottle and the spray pump (rinsing with a suitable medium according to the type of formulation) and then thoroughly disinfecting them. For disinfection of the packaging, it is appropriate to use technical alcohol, for example isopropyl alcohol IPA 99 % isopropyl alkohol 1 l or plant-based ethanol Etanol 96 % denaturovaný rastlinný 1 l. After disinfection, the components must be allowed to air out completely and dry so that moisture does not condense inside the packaging.

The packaging can be used repeatedly if handled correctly, but always with strict hygiene rules observed. Before each new filling, the bottle and spray pump must be cleaned and then disinfected with a suitable alcohol-based product, for example with IPA 99 % isopropyl alkoholom or with Etanolom 96 % denaturovaným rastlinným. We recommend repeated use only if there is no risk of microbial contamination or undesirable chemical reaction between individual fillings.

The spray pump works on the principle of a mechanical pump which, when pressed, creates a vacuum and draws up the liquid from the bottle using a dip tube. If it does not draw sufficiently, check that the spray pump is correctly and firmly screwed on, that the tube is not too long or kinked and that there are no heavy deposits inside. For thicker or highly viscous formulations, it may be necessary to slightly adjust the formulation or choose a more suitable type of dispensing. At first use, it is common that the spray pump must be pressed several times until the system is completely filled.

If you decide not to reuse the packaging, we recommend recycling it according to the type of material indicated in the parameter table on the product page. Before handing it over for sorted collection, it is advisable to empty the bottle, minimise any remaining contents and, where possible, separate the basic components (bottle body and spray pump). Then place them in the appropriate container intended for the specific type of plastic according to local waste-sorting rules. In this way, you contribute to more efficient material recycling and to reducing the amount of waste.

For easier selection, we recommend using the advanced filter, which you can find at the top of the page after clicking on the relevant packaging category. Using the filter, you can clearly sort packaging according to key parameters such as neck type and size, overall size or volume, colour and material used. By combining several filters, you can quickly narrow down the offer to the packaging options that best match your product and the intended method of use.