The packaging can be reused if basic hygiene principles are followed. Before each new filling, we recommend thoroughly cleaning the bottle and the spray pump and then disinfecting them with a suitable alcohol, for example using the products IPA 99 % isopropyl alcohol or Ethanol 96 % denatured plant-based. Only after complete drying should you refill the packaging with the chosen preparation, in order to minimize the risk of microbial contamination as well as any effect on the fragrance or stability of the formulation from residues of the original product.

This glass bottle with spray pump is particularly suitable for liquid and low-viscosity products that need to be applied in the form of a fine mist. It is ideal for facial and body sprays, refreshing waters, aromatherapeutic mists, hair tonics and home perfumes. For formulations with a higher oil content or for thicker emulsions, we always recommend carrying out a trial filling to verify the smooth functioning of the spray pump and uniform dispersion.

You can clean the glass part of the bottle with warm water and a suitable cleaning agent and then rinse it thoroughly. For the spray pump, we recommend a gentler procedure – thorough rinsing with lukewarm water and, if necessary, also spraying through with clean water to remove product residues from the mechanism. After washing, allow all parts to dry completely, then apply disinfection and use the bottle again. Avoid mechanical damage to the nozzle and excessive bending of the dip tube in order to maintain the spraying functionality.

If you decide not to reuse the packaging, we recommend recycling it responsibly according to the material types specified in the product parameters. The glass part of the bottle can usually be placed, after emptying and rinsing, in a container intended for glass. The spray pump and plastic components must be separated and classified according to local rules for the collection of plastic packaging. Always follow the recycling symbols and the recommendations stated with the product and in the segregated collection system in your municipality.

To select suitable packaging, you can use the extended filter, which you will find at the top of the page after clicking on the relevant packaging category. In the extended filter, you can conveniently set the parameters according to your needs – for example, the neck type, size, colour or packaging material. In this way, you will quickly find bottles, jars, medicine bottles or containers that will correspond to your formulation and the intended method of use.