−10% with the code SOOTHE10
Nakúp ešte za 23,50€a dopravu máš zadarmo
Would you like to create account?
The plastic trigger sprayer represents a practical solution for convenient and even application of liquid preparations in cosmetics, drugstore products and hous... read more
0,85 € incl. VAT
The plastic trigger sprayer represents a practical solution for convenient and even application of liquid preparations in cosmetics, drugstore products and household use. Thanks to the trigger mechanism, it enables precise dosing and creates a fine mist, which is ideal for products intended for surface applications on the skin, hair, textiles or household surfaces. This type of packaging is especially popular for formulations where the combination of comfortable use, consumption control and clean application without direct contact with the contents is important.
The sprayer is designed to be combined with compatible bottles and containers with a corresponding thread. They are compatible with various types of closures and dosing systems (for example screw caps, droppers, sprayers or practical applicators) according to the selected parameters for the specific packaging. Combinations of packaging and closures created directly on Handymade are tested and functional. However, for all combinations we always recommend performing your own compatibility test – checking the sealing, dosing consistency and behaviour of the packaging in contact with the specific formulation (viscosity, alcohol content, oil or water base, etc.).
All technical parameters of the packaging are listed in the attached Packaging Quality Certificate and in the product parameters.
To select suitable packaging, we recommend using the advanced filter in the packaging categories. After clicking on the required category, the advanced filter is located in the upper part of the page and allows detailed sorting according to several parameters. You can filter by type and size of the neck, overall size of the packaging, colour and material. This allows you to easily select a bottle, jar or other packaging that best matches the properties of your product and the desired dosing method.
The sprayer can be reused with appropriate handling, but we always recommend adhering to strict hygiene principles. Before each new filling, it is necessary to clean the packaging and mechanism as thoroughly as possible and then disinfect them, ideally using a suitable alcohol (for example IPA or ethanol). For disinfection, you can use the products IPA 99 % isopropyl alcohol or ethanol 96 % denatured plant-based. Only after all parts are completely dry is the sprayer ready for reuse.
The trigger sprayer is most suitable for low-viscosity liquids that can be easily drawn up and evenly sprayed – typically aqueous solutions, water–alcohol mixtures and fine emulsions without significant undissolved particles. For formulations with a higher oil content or with more solid components, it is necessary to test whether the dip tube and valve do not clog and whether the sprayer maintains a consistent spray pattern. For thicker or heavily particulate preparations, another type of dosing (for example a pump) may be more suitable.
For thorough cleaning, we recommend first disassembling the sprayer into the accessible parts (bottle, head, tube) and rinsing them with warm water and a mild detergent suitable for the given material. It is then appropriate to pump clean water through the mechanism several times in order to remove residues of the previous product. After rinsing, all parts must be disinfected – for example using the products IPA 99 % isopropyl alcohol or ethanol 96 % denatured plant-based. After disinfection, allow the components to dry completely in a clean and protected place to prevent residual moisture in the new product.
If you decide not to continue using the sprayer and any corresponding bottle, we recommend recycling them in accordance with the type of material indicated in the product parameter table on the Handymade website. Before placing them in sorted waste, it is advisable to empty the packaging as much as possible and rinse it to remove product residues. Then follow the recycling symbols and recommendations in the parameters – based on these, you will place the packaging in the appropriate collection container (e.g. plastic). In the case of a combination of several materials, it is practical to separate the individual parts (bottle, closure, mechanism) so that they can end up in the correct recycling stream.
