Yes, the packaging can be reused if basic hygiene principles and suitable compatibility with your formulation are observed. Before each new filling, it is necessary to thoroughly wash the bottle and the disc-top closure, rinse them and then disinfect them with a suitable alcohol-based product, for example using the products IPA 99 % isopropyl alcohol or Ethanol 96 % denatured vegetable. Let the disinfectant solution act briefly, then allow the packaging to dry naturally and only then fill it.

For regular cleaning, we recommend lukewarm water with a mild detergent and a soft brush or sponge so that you can thoroughly clean the inside of the bottle as well as the area under the disc-top mechanism. After washing, rinse the packaging repeatedly with clean water, allow it to drain and dry completely. Before final use or refilling, it is advisable to disinfect the packaging with an alcohol solution (for example IPA 99 % or ethanol 96 %) and then let it air out to remove any alcohol residues.

The plastic packaging is not intended to be exposed to high temperatures. In case of excessive heating, there is a risk of softening and deformation of the material, which can negatively affect the shape of the bottle, the sealing of the disc-top closure and the overall functionality. For these reasons, washing in a dishwasher, boiling or sterilisation at high temperatures is not recommended. For cleaning, use only lukewarm water and mild cleaning agents, and possibly subsequent disinfection with alcohol at room temperature.

If you decide not to reuse the packaging, we recommend responsibly recycling it in accordance with the recycling marking and the information given in the product parameters on the website. Before placing it in sorted waste, completely empty the bottle, rinse it of product residues if possible and separate any different materials (for example the label or inserted components if they are made of another material). Then place the packaging into the appropriate collection container according to the type of plastic specified for the product. In this way, you help to ensure effective recycling and to reduce the amount of waste.

The disc-top mechanism is ideal for liquid and medium-viscosity products that can be easily extruded by gently squeezing the bottle. It is perfectly suited for shampoos, shower gels, liquid soaps, body lotions, conditioners, body emulsions and various cleaning or auxiliary solutions. For very thick creams or paste-like products, dispensing may be limited, so before filling it is advisable to test whether the product can be extruded easily enough and whether the disc-top opening does not remain clogged.

When selecting suitable packaging, we recommend using the advanced filter in the packaging material categories. After clicking on the relevant category (for example bottles, vials or jars), you will find the option to filter according to several parameters at the top of the page. You can choose the type and diameter of the neck, the size and shape of the packaging, the colour and the material, and thus quickly narrow down the offer to products that best correspond to your formulation and the intended method of dispensing.